Summary:
We found some files containing nothing but negative range tombstones,
and unsurprisingly their metadata specified a negative range, which made
things crash. Time to add a bit of user input validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6788
Reviewed By: zhichao-cao
Differential Revision: D21343719
Pulled By: ajkr
fbshipit-source-id: f1c16e4c3e9fa150958c8c866176632a3206fb74
Summary:
The patch extends `FindObsoleteFiles` and `PurgeObsoleteFiles` with
support for blob files. The behavior is analogous to SST files: obsolete
blob files are put on the "candidates for deletion" list, while live (and pending)
files are preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6807
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21406249
Pulled By: ltamasi
fbshipit-source-id: 1948f71c31927564b61e8af394f50ca3964880d9
Summary:
https://github.com/facebook/rocksdb/pull/6807 extends the logic that
identifies and purges obsolete files to blob files handled by RocksDB
itself. In order to prevent that from interfering with the current BlobDB code,
we need to make sure that `BlobDBOptions::blob_dir` is different from
the storage directories used by the base DB. (Note: this is true by default.)
The patch adds a check that explicitly disallows this configuration and
returns `Status::NotSupported` from `BlobDB::Open` in such cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6810
Test Plan: Tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21412676
Pulled By: ltamasi
fbshipit-source-id: 6630cc7481e48c8bf55d59423b25f14d52ffe681
Summary:
Current DBCompactionTest.ConsistencyFailTest checks DB fails after L0 inconsitency is found. Add slightly more coverage by introducing DBCompactionTest.ConsistencyFailTest2 which checks non-L0 files too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6800
Test Plan: Run the new test.
Reviewed By: riversand963
Differential Revision: D21384806
fbshipit-source-id: 36db7b657eed42115283fe2f6afa4c3a31a3b510
Summary:
Add methods and constructors for handling enums to the OptionTypeInfo. This change allows enums to be converted/compared without adding a special "type" to the OptionType.
This change addresses a couple of issues:
- It allows new enumerated types to be added to the options without editing the OptionType base class (and related methods)
- It standardizes the procedure for adding enumerated types to the options, reducing potential mistakes
- It moves the enum maps to the location where they are used, allowing them to be static file members rather than global values
- It reduces the number of types and cases that need to be handled in the various OptionType methods
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6423
Reviewed By: siying
Differential Revision: D21408713
Pulled By: zhichao-cao
fbshipit-source-id: fc492af285d011822578b95d186a0fce25d35626
Summary:
This very old test code bug was causing a new valgrind failure
in MultiGetDeadlineExceeded
Also fix hang in MultiGetDeadlineExceeded by unifying with some logic from another test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6803
Test Plan: run that unit test under valgrind, make check
Reviewed By: siying
Differential Revision: D21388470
Pulled By: pdillinger
fbshipit-source-id: 0ce99d6d5eb8cd3195b17406892c8c5cff5fa5dd
Summary:
With consistency check enabled, VersionBuilder::SaveTo() may return error once
corruption is detected while building versions. We should handle these errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6801
Test Plan: make check
Reviewed By: siying
Differential Revision: D21385045
Pulled By: riversand963
fbshipit-source-id: 98f6424e2a4699b62befa21e9fe00e70a771118e
Summary:
Current impl. of db_stress will abort verification and report failure if
GetLiveFiles() causes a dropped column family to be flushed. This is not
desired.
To fix, this PR makes the following change:
In GetLiveFiles, if flush is triggered and returns
Status::IsColumnFamilyDropped(), then set status to Status::OK().
This is OK because dropped column families will be skipped during the rest of
this function, and valid column families will have their live files returned to
caller.
Test plan (dev server):
make check
./db_stress -ops_per_thread=1000 -get_live_files_one_in=100 -clear_column_family_one_in=100
./db_stress -disable_wal=1 -reopen=0 -ops_per_thread=1000 -get_live_files_one_in=100 -clear_column_family_one_in=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6805
Reviewed By: ltamasi
Differential Revision: D21390044
Pulled By: riversand963
fbshipit-source-id: de67846b95a4f1b88aa0a30c3d70c43cc68625b9
Summary:
The patch adds logic that returns the set of live blob files from
`Version::AddLiveFiles` and `VersionSet::AddLiveFiles` (in addition to
live table files), and also cleans up the code a bit, for example, by
exposing only the numbers of table files as opposed to the earlier
`FileDescriptor`s that no clients used. Moreover, the patch extends
the `GetLiveFiles` API so that it also exposes blob files in the current version.
Similarly to https://github.com/facebook/rocksdb/pull/6755,
this is a building block for identifying and purging obsolete blob files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6785
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21336210
Pulled By: ltamasi
fbshipit-source-id: fc1aede8a49eacd03caafbc5f6f9ce43b6270821
Summary:
We are swallowing some file consistency checking failures. This is not expected. We are fixing two cases: DB reopen and manifest dump.
More places are not fixed and need follow-up.
Error from CheckConsistencyForDeletes() is also swallowed, which is not fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6793
Test Plan: Add a unit test to cover the reopen case.
Reviewed By: riversand963
Differential Revision: D21366525
fbshipit-source-id: eb438a322237814e8d5125f916a3c6de97f39ded
Summary:
Fix issues for reproducing synthetic ZippyDB workloads in the FAST20' paper using db_bench. Details changes as follows.
1, add a separate random mode in MixGraph to produce all_random workload.
2, fix power inverse function for generating prefix_dist workload.
3, make sure key_offset in prefix mode is always unsigned.
note: Need to carefully choose key_dist_a/b to avoid aliasing. Power inverse function range should be close to overall key space.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6795
Reviewed By: akankshamahajan15
Differential Revision: D21371095
Pulled By: zhichao-cao
fbshipit-source-id: 80744381e242392c8c7cf8ac3d68fe67fe876048
Summary:
When expiration is set in a pessimistic transaction, `txn_state_` is already updated to `AWAITING_PREPARE` in the `if (expiration_time_ > 0)` block, there is no need to update the state in `if (can_prepare)` block again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6778
Test Plan: make check
Reviewed By: lth
Differential Revision: D21335319
Pulled By: cheng-chang
fbshipit-source-id: 251d634cc7d1a0e86e673a59f0bda8584da5a35f
Summary:
The multiple CF hash map is not passed to the multi-thread worker. When using multi-thread replay for multiple CFs, it will cause segment fault. Pass the cf_map to the argument.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6787
Test Plan: pass trace replay test.
Reviewed By: yhchiang
Differential Revision: D21339941
Pulled By: zhichao-cao
fbshipit-source-id: 434482b492287e6722c7cd5a706f057c5ec170ce
Summary:
Add Github Action to perform some basic sanity check for PR, inclding the
following.
1) Buck TARGETS file.
On the one hand, The TARGETS file is used for internal buck, and we do not
manually update it. On the other hand, we need to run the buckifier scripts to
update TARGETS whenever new files are added, etc. With this Github Action, we
make sure that every PR does not forget this step. The GH Action uses
a Makefile target called check-buck-targets. Users can manually run `make
check-buck-targets` on local machine.
2) Code format
We use clang-format-diff.py to format our code. The GH Action in this PR makes
sure this step is not skipped. The checking script build_tools/format-diff.sh assumes that `clang-format-diff.py` is executable.
On host running GH Action, it is difficult to download `clang-format-diff.py` and make it
executable. Therefore, we modified build_tools/format-diff.sh to handle the case in which there is a non-executable clang-format-diff.py file in the top-level rocksdb repo directory.
Test Plan (Github and devserver):
Watch for Github Action result in the `Checks` tab.
On dev server
```
make check-format
make check-buck-targets
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6761
Test Plan: Watch for Github Action result in the `Checks` tab.
Reviewed By: pdillinger
Differential Revision: D21260209
Pulled By: riversand963
fbshipit-source-id: c646e2f37c6faf9f0614b68aa0efc818cff96787
Summary:
The current way of implementing CompressionOptions.parallel_threads introduces a format change. We plan to change CompressionOptions's serailization format to a new JSON-like format, which would be another format change. We would like to consolidate the two format changes into one, rather than making some users to change twice. Hold CompressionOptions.parallel_threads from being supported by option string for now. Will add it back after the general CompressionOptions's format change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6782
Test Plan: Run all existing tests.
Reviewed By: zhichao-cao
Differential Revision: D21338614
fbshipit-source-id: bca2dac3cb37d4e6e64b52cbbe8ea749cd848685
Summary:
In current commit protocol of pessimistic transaction, if the transaction is not prepared before commit, the commit protocol implicitly assumes that the user wants to commit without prepare.
This PR adds TransactionOptions::skip_prepare, the default value is `true` because if set to `false`, all existing users who commit without prepare need to update their code to set skip_prepare to true. Although this does not force the user to explicitly express their intention of skip_prepare, it at least lets the user be aware of the assumption of being able to commit without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6775
Test Plan: added a new unit test TransactionTest::CommitWithoutPrepare
Reviewed By: lth
Differential Revision: D21313270
Pulled By: cheng-chang
fbshipit-source-id: 3d95b7c9b2d6cdddc09bdd66c561bc4fae8c3251
Summary:
There is no systematic mechanism to prevent BlockBasedTableBuilder's status to be set from non-OK to OK. Adding a mechanism to force this will help us prevent failures in the future.
The solution is to only make it possible to set the status code if the status code to set is not OK.
Since the status code passed to CompressAndVerifyBlock() is changed, a mini refactoring is done too so that the output arguments are changed from reference to pointers, based on Google C++ Style.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6776
Test Plan: Run all existing test.
Reviewed By: pdillinger
Differential Revision: D21314382
fbshipit-source-id: 27000c10f1e4c121661e026548d6882066409375
Summary:
The feature of CompressionOptions::parallel_threads is still not yet mature. Mention it to be experimental in the comments for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6781
Reviewed By: pdillinger
Differential Revision: D21330678
fbshipit-source-id: d7dd7d099fb002a5c6a5d8da689ce5ee08a9eb13
Summary:
Calculate ```IOOptions::timeout``` using ```ReadOptions::deadline``` and pass it to ```FileSystem::Read/FileSystem::MultiRead```. This allows us to impose a tighter bound on the time taken by Get/MultiGet on FileSystem/Envs that support IO timeouts. Even on those that don't support, check in ```RandomAccessFileReader::Read``` and ```MultiRead``` and return ```Status::TimedOut()``` if the deadline is exceeded.
For now, TableReader creation, which might do file opens and reads, are not covered. It will be implemented in another PR.
Tests:
Update existing unit tests to verify the correct timeout value is being passed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6751
Reviewed By: riversand963
Differential Revision: D21285631
Pulled By: anand1976
fbshipit-source-id: d89af843e5a91ece866e87aa29438b52a65a8567
Summary:
An assertion that a char == a CompressionType (unsigned char)
originally cast from a char can fail if the original value is negative,
due to numeric promotion. The assertion should pass even if the value
is invalid CompressionType, because the callee
UncompressBlockContentsForCompressionType checks for that and reports
status appropriately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6780
Test Plan:
Temporarily change kZSTD = 0x88 and see tests fail. Make this
change (in addition), and tests pass.
Reviewed By: siying
Differential Revision: D21328498
Pulled By: pdillinger
fbshipit-source-id: 61caf8d815581ce49261ecb7ab0f396e9ac4bb92
Summary:
The patch adds logic to keep track of obsolete blob files. A blob file becomes
obsolete when the last `shared_ptr` that points to the corresponding
`SharedBlobFileMetaData` object goes away, which, in turn, happens when the
last `Version` that contains the blob file is destroyed. No longer needed blob
files are added to the obsolete list in `VersionSet` using a custom deleter to
avoid unnecessary coupling between `SharedBlobFileMetaData` and `VersionSet`.
Obsolete blob files are returned by `VersionSet::GetObsoleteFiles` and stored
in `JobContext`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6755
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21233155
Pulled By: ltamasi
fbshipit-source-id: 47757e06fdc0127f27ed57f51abd27893d9a7b7a
Summary:
This commit adds an `compression_parallel_threads` option in
db_stress. It also fixes the naming of parallel compression
option in db_bench to keep it aligned with others.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6722
Reviewed By: pdillinger
Differential Revision: D21091385
fbshipit-source-id: c9ba8c4e5cc327ff9e6094a6dc6a15fcff70f100
Summary:
The issue is reported in https://github.com/facebook/rocksdb/issues/6753 . size_t is unsigned and if sorted_file.size() is 0, the end condition of i will be extremely large, cause segment fault in sorted_files[i] and sorted_files[i+1]. Added condition to fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6762
Test Plan: make asan_check
Reviewed By: pdillinger
Differential Revision: D21323063
Pulled By: zhichao-cao
fbshipit-source-id: 56ce59201949ed319448228553202b8642c2cc3a
Summary:
Fix the following cases that can cause false alarms in db_stress when read fault injection is
enabled -
1. Turn off corruption/truncation when direct IO is enabled. Since the actual IO size is larger than block size due to alignment requirements, the corruption may not result in a detectable error.
2. Handle the case when the randomly generated string to overwrite the original block is identical to the original.
Tests:
Run db_stress w/ and wo/ direct IO and fault injection turned on
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6777
Reviewed By: zhichao-cao
Differential Revision: D21316734
Pulled By: anand1976
fbshipit-source-id: bf0e6468043063ca81ff877d4bf71d3f296c77aa
Summary:
Nasty bug in which more/different changes would be applied than
those shown to user
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6772
Test Plan: manual
Reviewed By: siying
Differential Revision: D21304604
Pulled By: pdillinger
fbshipit-source-id: 7e20740e513c9c300d1522511290a025b35abedc
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
Added functions for parsing, serializing, and comparing elements to OptionTypeInfo. These functions allow all of the special cases that could not be handled directly in the map of OptionTypeInfo to be moved into the map. Using these functions, every type can be handled via the map rather than special cased.
By adding these functions, the code for handling options can become more standardized (fewer special cases) and (eventually) handled completely by common classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6422
Test Plan: pass make check
Reviewed By: siying
Differential Revision: D21269005
Pulled By: zhichao-cao
fbshipit-source-id: 9ba71c721a38ebf9ee88259d60bd81b3282b9077
Summary:
GetSupportedCompressions needs to be defined under LITE.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6758
Test Plan: build under LITE
Reviewed By: zhichao-cao
Differential Revision: D21247937
Pulled By: cheng-chang
fbshipit-source-id: 880e59d3e107cdd736d16427a68c5641d1318fb4
Summary:
If an error happens during BlobDBImpl::Open after the base DB has been
opened, we need to destroy the `ColumnFamilyHandle`s returned by `DB::Open`
to prevent an assertion in `ColumnFamilySet`'s destructor from being hit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6763
Test Plan: Ran `make check` and tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21262643
Pulled By: ltamasi
fbshipit-source-id: 60ebc7ab19be66cf37fbe5f6d8957d58470f3d3b
Summary:
Fixed minor typo in comment for FullMergeV2().
Last operand up to snapshot should be +4 instead of +3.
Signed-off-by: Albert Hse-Lin Chen <hselin@kalista.io>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6759
Reviewed By: cheng-chang
Differential Revision: D21260295
Pulled By: zhichao-cao
fbshipit-source-id: cc942306f246c8606538feb30bfdf6df9fb6c54e
Summary:
Since read threads do not coordinate on loading data into block
cache, two threads between Lookup and Insert can end up loading and
inserting the same data. This is particularly concerning with
cache_index_and_filter_blocks since those are hot and more likely to
be race targets if ejected from (or not pre-populated in) the cache.
Particularly with moves toward disaggregated / network storage, the cost
of redundant retrieval might be high, and we should at least have some
hard statistics from which we can estimate impact.
Example with full filter thrashing "cliff":
$ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10
...
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((130 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 14181
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 476
rocksdb.block.cache.data.add COUNT : 12749
rocksdb.block.cache.data.add.redundant COUNT : 18
rocksdb.block.cache.filter.add COUNT : 1003
rocksdb.block.cache.filter.add.redundant COUNT : 217
rocksdb.block.cache.index.add COUNT : 429
rocksdb.block.cache.index.add.redundant COUNT : 241
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((120 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 1182223
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 302728
rocksdb.block.cache.data.add COUNT : 31425
rocksdb.block.cache.data.add.redundant COUNT : 12
rocksdb.block.cache.filter.add COUNT : 795455
rocksdb.block.cache.filter.add.redundant COUNT : 130238
rocksdb.block.cache.index.add COUNT : 355343
rocksdb.block.cache.index.add.redundant COUNT : 172478
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6681
Test Plan: Some manual testing (above) and unit test covering key metrics is included
Reviewed By: ltamasi
Differential Revision: D21134113
Pulled By: pdillinger
fbshipit-source-id: c11497b5f00f4ffdfe919823904e52d0a1a91d87
Summary:
Summary : 1. Add two arguments --compression_level_from and --compression_level_to to check
the compression size with different compression level in the given range. Users must
specify one compression type else it will error out. Both from and to levels must
also be specified together.
2. Display the time taken to compress each file with different compressions by default.
Test Plan : make -j64 check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6634
Test Plan: make -j64 check
Reviewed By: anand1976
Differential Revision: D20810282
Pulled By: akankshamahajan15
fbshipit-source-id: ac9098d3c079a1fad098f6678dbedb4d888a791b
Summary:
Some common build variables like USE_CLANG and
COMPILE_WITH_UBSAN did not work if specified as make variables, as in
`make USE_CLANG=1 check` etc. rather than (in theory less hygienic)
`USE_CLANG=1 make check`. This patches Makefile to export some commonly
used ones to build_detect_platform so that they work. (I'm skeptical of
a broad `export` in Makefile because it's hard to predict how random
make variables might affect various invoked tools.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6740
Test Plan: manual / CI
Reviewed By: siying
Differential Revision: D21229011
Pulled By: pdillinger
fbshipit-source-id: b00c69b23eb2a13105bc8d860ce2d1e61ac5a355
Summary:
Some recent PRs added new source files or modified TARGETS file manually.
During next internal release, executing the following command will revert the
manual changes.
Update buckifier so that the following command
```
python buckfier/buckify_rocksdb.py
```
does not change TARGETS file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6726
Test Plan:
```
python buckifier/buckify_rocksdb.py
```
Reviewed By: siying
Differential Revision: D21098930
Pulled By: riversand963
fbshipit-source-id: e884f507fefef88163363c9097a460c98f1ed850
Summary:
In crash test, the db directory might be set to /dev/shm or /tmp, in certain environments such as internal testing infrastructure, neither of these directories support direct IO, so direct IO is never enabled in crash test.
This PR sets up SyncPoints in direct IO related code paths to disable O_DIRECT flag in calls to `open`, so the direct IO code paths will be executed, all direct IO related assertions will be checked, but no real direct IO request will be issued to the file system.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6727
Test Plan:
export CRASH_TEST_EXT_ARGS="--use_direct_reads=1 --mmap_read=0"
make -j24 crash_test
Reviewed By: zhichao-cao
Differential Revision: D21139250
Pulled By: cheng-chang
fbshipit-source-id: db9adfe78d91aa4759835b1af91c5db7b27b62ee
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
In release mode, asserts are not compiled, so `r` is not used, causing compiler warnings.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6750
Test Plan: make check under release mode
Reviewed By: anand1976
Differential Revision: D21220365
Pulled By: cheng-chang
fbshipit-source-id: fd4afa9843d54af68c4da8660ec61549803e1167
Summary:
After a successful recovery, the CURRENT file should be updated to point to the valid MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6746
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D21189876
Pulled By: riversand963
fbshipit-source-id: 7537b49988c5c425ebe9505a5cc260de351ad79b
Summary:
The patch makes a couple of small cleanups to `SharedBlobFileMetaData` and `BlobFileMetaData`:
* It makes the constructors private and introduces factory methods to ensure these objects are always owned by `shared_ptr`s. Note that `SharedBlobFileMetaData` has an additional factory that takes a deleter object; we can utilize this to e.g. notify `VersionSet` when a blob file becomes obsolete (which is exactly when `SharedBlobFileMetaData` is destroyed).
* It disables move operations explicitly instead of relying on them being suppressed because of a user-declared destructor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6749
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21206947
Pulled By: ltamasi
fbshipit-source-id: 9094c14cc335b3e226f883e5a0df4f87a5cdeb95
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings. There is a mishmash of parameters in use here with more needed in the future. This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389
Reviewed By: siying
Differential Revision: D21163707
Pulled By: zhichao-cao
fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
Summary:
Initial implementation of ReadOptions.deadline for MultiGet. If the request takes longer than the deadline, the keys not yet found will be returned with Status::TimedOut(). This
implementation enforces the deadline in DBImpl, which is fairly high
level. Its best effort and may not check the deadline after every key
lookup, but may do so after a batch of keys.
In subsequent stages, we will extend this to passing a timeout down to the FileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6710
Test Plan: Add new unit tests
Reviewed By: riversand963
Differential Revision: D21149158
Pulled By: anand1976
fbshipit-source-id: 9f44eecffeb40873f5034ed59a66d21f9f88879e
Summary:
When index block is empty or an error happens while reading it,
`Invalidate()` is called rather than `Initialize()`. So `Seek()` must
not refer to member variables that are only initialized in
`Initialize()` until it is sure `Initialize()` has been called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6736
Reviewed By: siying
Differential Revision: D21139641
Pulled By: ajkr
fbshipit-source-id: 71c58cc1adbd795dc3729dd5023bf7df1515ff32
Summary:
1. Add changes so that max_background_flushes can be set dynamically.
2. Add a testcase DBOptionsTest.SetBackgroundFlushThreads which set the
max_background_flushes dynamically using SetDBOptions.
TestPlan: 1. make -j64 check
2. Using new testcase DBOptionsTest.SetBackgroundFlushThreads
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6701
Reviewed By: ajkr
Differential Revision: D21028010
Pulled By: akankshamahajan15
fbshipit-source-id: 5f949e4a8fd3c32537b637947b7ee09a69cfc7c1
Summary:
Based on https://github.com/facebook/rocksdb/issues/6648 (CLA Signed), but heavily modified / extended:
* Implicit capture of this via [=] deprecated in C++20, and [=,this] not standard before C++20 -> now using explicit capture lists
* Implicit copy operator deprecated in gcc 9 -> add explicit '= default' definition
* std::random_shuffle deprecated in C++17 and removed in C++20 -> migrated to a replacement in RocksDB random.h API
* Add the ability to build with different std version though -DCMAKE_CXX_STANDARD=11/14/17/20 on the cmake command line
* Minimal rebuild flag of MSVC is deprecated and is forbidden with /std:c++latest (C++20)
* Added MSVC 2019 C++11 & MSVC 2019 C++20 in AppVeyor
* Added GCC 9 C++11 & GCC9 C++20 in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6697
Test Plan: make check and CI
Reviewed By: cheng-chang
Differential Revision: D21020318
Pulled By: pdillinger
fbshipit-source-id: 12311be5dbd8675a0e2c817f7ec50fa11c18ab91
Summary:
Recently index_type kBinarySearchWithFirstKey is improved so that the API guarantee is exactly the same as other types and it is ready for wide production. We should cover it in crash tst.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6721
Test Plan: Run crash_test
Reviewed By: anand1976
Differential Revision: D21099781
fbshipit-source-id: fda91eba831d9eacbb140c703e9768bb1701f935
Summary:
IsDirectory() is a common API to check whether a path is a regular file or
directory.
POSIX: call stat() and use S_ISDIR(st_mode)
Windows: PathIsDirectoryA() and PathIsDirectoryW()
HDFS: FileSystem.IsDirectory()
Java: File.IsDirectory()
...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6711
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D21053520
Pulled By: riversand963
fbshipit-source-id: 680aadfd8ce982b63689190cf31b3145d5a89e27
Summary:
RocksDB behavior is different while max_open_files is small or large. Add the coverage to small max_open_files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6719
Test Plan: Run crash_test
Reviewed By: pdillinger
Differential Revision: D21081021
fbshipit-source-id: e3e211761a9bd25d93d19a61c1f7b62d48cf5e3c
Summary:
This PR exposes the `Iterator::Refresh` method to the Java API by adding it on the `RocksIteratorInterface` interface. There are three concrete implementations: `RocksIterator`, `SstFileReaderIterator`, and `WBWIRocksIterator`. For the first two cases, the JNI side simply delegates to the underlying `Iterator::Refresh` method; in the last case, as it doesn't share an ancestor, and per the discussion in https://github.com/facebook/rocksdb/issues/3465, a `Status::NotSupported` exception is thrown.
As the last PR had no activity in a while, I'm opening a new one - I'm completely fine with merging the previous PR if it gets completed before this is reviewed.
Let me know if there's anything missing or anything else I can do 👍
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6573
Reviewed By: cheng-chang
Differential Revision: D20604666
Pulled By: pdillinger
fbshipit-source-id: 4de17df1180c3b87b76cfdd77b674b81fc0563f7
Summary:
Adding solid support for multiple architectures was initially triggered by RocksJava users. As such I would like to keep the CI for RocksJava on all architectures, to ensure we don't break backwards compatibility.
pdillinger okay let's see how long it takes to complete Travis-CI with this one...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6583
Reviewed By: cheng-chang
Differential Revision: D21036718
Pulled By: pdillinger
fbshipit-source-id: 97afe0db2e4c575cc0284fdc1d4cc45d5deb2272
Summary:
Updates the version of bzip2 used for RocksJava static builds.
Please, can we also get this cherry-picked to:
1. 6.7.fb
2. 6.8.fb
3. 6.9.fb
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6714
Reviewed By: cheng-chang
Differential Revision: D21067233
Pulled By: pdillinger
fbshipit-source-id: 8164b7eb99c5ca7b2021ab8c371ba9ded4cb4f7e
Summary:
Invariant checking should use internal key comparator rather than
`sstableKeyCompare()`. The latter was intended for checking whether a
compaction input file's neighboring files need to be included in the
same compaction. Using it for invariant checking was leading to false
positives for files with overlapping endpoints.
Fixes https://github.com/facebook/rocksdb/issues/6647.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6663
Test Plan: regression test
Reviewed By: zhichao-cao
Differential Revision: D20910466
Pulled By: ajkr
fbshipit-source-id: f0b70dad7c4096fce635cab7a36f16e14f74ae3f
Summary:
Options.avoid_flush_during_recovery is uncovered in crash_test. Add the coverage with a chance of 1/8, as it is a less frequently used options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6712
Test Plan: Run crash_test and see the option can be used or not used by chance.
Reviewed By: ltamasi
Differential Revision: D21056566
fbshipit-source-id: c3b1521517cfc204786e6ef8c6acd7fffda64793
Summary:
Add env_fault_injection argument to db_stress. When enabled,
FaultInjectionTestEnv will be used instead. Currently this
option does not support running with other env setting.
This will allow
us to later manually produce error when running db_crashtest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6687
Test Plan:
make db_stress -j32
./db_stress --env_fault_injection
./db_stress --env_fault_injection --hdfs // expect error message
Reviewed By: ajkr
Differential Revision: D21014683
Pulled By: yhchiang
fbshipit-source-id: 0724aeac37efd57adb72a37defe6dbd3bfa8106a
Summary:
Compilation fails on systems that do not support O_CLOEXEC. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6695
Test Plan: compile without O_CLOEXEC support
Reviewed By: anand1976
Differential Revision: D21011850
Pulled By: cheng-chang
fbshipit-source-id: f1bf1cce2aa65c7d10b5a9613e941db30e928347
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
Summary:
This was causing db_crashtest.py to wrongly assume an error by parsing the output. Hopefully this will stabilize the crash tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6705
Test Plan: make blackbox_crash_test
Reviewed By: ltamasi
Differential Revision: D21043335
Pulled By: anand1976
fbshipit-source-id: 5cddd112b124d4e2ebd11724a17d4ef0f50c1cf8
Summary:
Improve it in two ways:
1. tools/check_format_compatible.sh is not friendly to run outside FB environment. remove the hard-coded http proxy setting. Instead, move it to Legocastle configuration
2. Always disable warning as error, so that older build is more likely to pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6702
Test Plan: Run the test and make sure at least it doesn't break.
Reviewed By: riversand963
Differential Revision: D21033329
fbshipit-source-id: 88b4ec1ec49547b772790050a165466bdc4a62a0
Summary:
1. Fix a memory leak in FaultInjectionTestFS in the stack trace related
code
2. Check status of all MultiGet keys before deciding whether an error
was swallowed, instead of assuming an ok status for any key means an
undetected error
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6700
Test Plan: Run db_stress with asan and fault injection
Reviewed By: cheng-chang
Differential Revision: D21021498
Pulled By: anand1976
fbshipit-source-id: 489191efd1ab0fa834923a1e1d57253a7a315465
Summary:
The error message is causing problems in the crash tests due to the
error parsing logic in db_crashtest.py.
This is a follow up PR for https://github.com/facebook/rocksdb/pull/6694.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6696
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D21021875
Pulled By: cheng-chang
fbshipit-source-id: 11e3f536df16941a89949ebcd2147cd8dfa3fbe0
Summary:
Log it in the info log to help in troubleshooting. It is logged as follows -
```
2020/04/10-10:51:39.886662 7ffff7fef340 Options.table_properties_collectors: CompactOnDeletionCollector (Sliding window size = 100 Deletion trigger = 90);
```
Tests:
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6686
Reviewed By: ltamasi
Differential Revision: D21002442
Pulled By: anand1976
fbshipit-source-id: 7adf0dbae7f1febcb00ce61fea5097118ede5c6a
Summary:
Add NewFileChecksumGenCrc32cFactory to file checksum public interface such that applications can use the build in crc32 checksum factory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6688
Test Plan: pass make asan_check
Reviewed By: riversand963
Differential Revision: D21006859
Pulled By: zhichao-cao
fbshipit-source-id: ea8a45196a8b77c310728ab05f6cc0f49f3baef0
Summary:
BlockBasedTableBuilder::ParallelCompressionRep::first_block can be read in
Flush() and written in BGWorkWriteRawBlock() concurrently. This commit fixes
the issue by reading first_block out before pushing the block to compression
and write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6640
Test Plan: Run all tests concurrently with TSAN.
Reviewed By: cheng-chang
Differential Revision: D20851370
fbshipit-source-id: 6f039222e8319d31e15f1b45e05c106527253f72
Summary:
The error message is causing problems in the crash tests due to the
error parsing logic in db_crashtest.py.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6694
Reviewed By: siying
Differential Revision: D20998531
Pulled By: anand1976
fbshipit-source-id: 89cb54a5f5bb664ae6d239c37559f10e14c5ea07
Summary:
In index blocks since `format_version=3`, user keys are written
rather than internal keys. When reading such blocks, the comparator is
obtained via `InternalKeyComparator::user_comparator()`. That function
must not return an unwrapped result as the wrapper class provides
accounting logic to populate `PerfContext::user_key_comparison_count`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6650
Test Plan:
ran db_bench and verified
`PerfContext::user_key_comparison_count` became larger.
Reviewed By: cheng-chang
Differential Revision: D20866325
Pulled By: ajkr
fbshipit-source-id: ad755d46bda31157dacc5b66e532279f19ad538c
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
Towards making compaction logic compatible with user timestamp.
When computing boundaries and overlapping ranges for inputs of compaction, We need to compare SSTs by user key without timestamp.
Test plan (devserver):
```
make check
```
Several individual tests:
```
./version_set_test --gtest_filter=VersionStorageInfoTimestampTest.GetOverlappingInputs
./db_with_timestamp_compaction_test
./db_with_timestamp_basic_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6645
Reviewed By: ltamasi
Differential Revision: D20960012
Pulled By: riversand963
fbshipit-source-id: ad377fa9eb481bf7a8a3e1824aaade48cdc653a4
Summary:
Summary : Set manual_compaction false in case of DeleteTriggeredCompaction object so that kFilesMarkedForComapaction can be reported.
Added a DeletionTriggeredUniversalCompactionMarking test case for Deletion Triggered compaction in case of Universal Compaction.
Test Plan : make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6680
Test Plan: make check -j64
Reviewed By: anand1976
Differential Revision: D20945946
Pulled By: akankshamahajan15
fbshipit-source-id: af84e417bd7127652aaae9143c560d1ab3815d25
Summary:
(Based on Yanqin's idea) Add a new field in readoptions as lower timestamp bound for iterator. When the parameter is not supplied (nullptr), the iterator returns the latest visible version of a record. When it is supplied, the existing timestamp field is the upper bound. Together the two serves as a bounded time window. The iterator returns all versions of a record falling in the window.
SeekRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit e860f8840):
seekrandom : 7.836 micros/op 4082449 ops/sec; (0 of 73481999 found)
This PR:
seekrandom : 7.764 micros/op 4120935 ops/sec; (0 of 71303999 found)
db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=seekrandom --use_existing_db=1 --num=25000000 --threads=32 --allow_concurrent_memtable_write=0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6544
Reviewed By: ltamasi
Differential Revision: D20844069
Pulled By: riversand963
fbshipit-source-id: d97f2bf38a323c8c6a68db213b2d3c694b1c1f74
Summary:
New memory technologies are being developed by various hardware vendors (Intel DCPMM is one such technology currently available). These new memory types require different libraries for allocation and management (such as PMDK and memkind). The high capacities available make it possible to provision large caches (up to several TBs in size), beyond what is achievable with DRAM.
The new allocator provided in this PR uses the memkind library to allocate memory on different media.
**Performance**
We tested the new allocator using db_bench.
- For each test, we vary the size of the block cache (relative to the size of the uncompressed data in the database).
- The database is filled sequentially. Throughput is then measured with a readrandom benchmark.
- We use a uniform distribution as a worst-case scenario.
The plot shows throughput (ops/s) relative to a configuration with no block cache and default allocator.
For all tests, p99 latency is below 500 us.
**Changes**
- Add MemkindKmemAllocator
- Add --use_cache_memkind_kmem_allocator db_bench option (to create an LRU block cache with the new allocator)
- Add detection of memkind library with KMEM DAX support
- Add test for MemkindKmemAllocator
**Minimum Requirements**
- kernel 5.3.12
- ndctl v67 - https://github.com/pmem/ndctl
- memkind v1.10.0 - https://github.com/memkind/memkind
**Memory Configuration**
The allocator uses the MEMKIND_DAX_KMEM memory kind. Follow the instructions on[ memkind’s GitHub page](https://github.com/memkind/memkind) to set up NVDIMM memory accordingly.
Note on memory allocation with NVDIMM memory exposed as system memory.
- The MemkindKmemAllocator will only allocate from NVDIMM memory (using memkind_malloc with MEMKIND_DAX_KMEM kind).
- The default allocator is not restricted to RAM by default. Based on NUMA node latency, the kernel should allocate from local RAM preferentially, but it’s a kernel decision. numactl --preferred/--membind can be used to allocate preferentially/exclusively from the local RAM node.
**Usage**
When creating an LRU cache, pass a MemkindKmemAllocator object as argument.
For example (replace capacity with the desired value in bytes):
```
#include "rocksdb/cache.h"
#include "memory/memkind_kmem_allocator.h"
NewLRUCache(
capacity /*size_t*/,
6 /*cache_numshardbits*/,
false /*strict_capacity_limit*/,
false /*cache_high_pri_pool_ratio*/,
std::make_shared<MemkindKmemAllocator>());
```
Refer to [RocksDB’s block cache documentation](https://github.com/facebook/rocksdb/wiki/Block-Cache) to assign the LRU cache as block cache for a database.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6214
Reviewed By: cheng-chang
Differential Revision: D19292435
fbshipit-source-id: 7202f47b769e7722b539c86c2ffd669f64d7b4e1
Summary:
https://github.com/facebook/rocksdb/pull/6668 added some new test code but it has a risk of memory corruption. Fix it
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6676
Test Plan: Run the test under ASAN and see it passes.
Reviewed By: ajkr
Differential Revision: D20937108
fbshipit-source-id: 22cc96bb02030df0a37a02e67a2cc37ca31ba22d
Summary:
Although these optimizations are not user facing, still feel it's valuable to call out in HISTORY.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6679
Test Plan: no need
Reviewed By: zhichao-cao
Differential Revision: D20945916
Pulled By: cheng-chang
fbshipit-source-id: f3e790c07f3bcc4a8a74246c4fa232800ddd4438
Summary:
On reading an ingested SST file, `DataBlockIter` will replace seqno encoded in a key with global seqno. However, if the original seqno was part of the prefix used for the next key, the global seqno is by mistake used as part of the prefix to construct the next key, causing wrong result being returned. Although at this point it is only software error while data in the file is not corrupted, the issue can further cause compaction output out of order and corrupted result when the ingested SST participated in compaction. Fixing the issue by save the actual seqno and restore it before the key being used as prefix to construct next key.
The unit test is by Little-Wallace from https://github.com/facebook/rocksdb/issues/6666. Fixing https://github.com/facebook/rocksdb/issues/6666.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6669
Test Plan:
New unit test
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Reviewed By: cheng-chang
Differential Revision: D20931808
Pulled By: ajkr
fbshipit-source-id: f01959c35d6a493954dca981663766c7a5a9e8ab
Summary:
When aligned_buf is provided, the result slice's starting address should take offset advance into account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6672
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D20934198
Pulled By: cheng-chang
fbshipit-source-id: c3475c9c132b92c50d8c7c399fca2e9e76870803
Summary:
Source code path in info log is not truncated to the correct length. Fixing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5824
Test Plan:
Build and run db_bench. Before:
```
2019/09/18-21:32:34.631181 7fdd42df6700 [_impl/db_impl_write.cc:1654] [default] New memtable created with log file: https://github.com/facebook/rocksdb/issues/9. Immutable memtables: 0.
```
After:
```
2019/09/18-21:36:09.226532 7f141b5f6700 [/db_impl/db_impl_write.cc:1654] [default] New memtable created with log file: https://github.com/facebook/rocksdb/issues/9. Immutable memtables: 0.
```
Reviewed By: cheng-chang
Differential Revision: D17511851
fbshipit-source-id: b2f92c85ce78726c27b7e0e736657fe2f983513e
Summary:
… to CFOptions
https://github.com/facebook/rocksdb/pull/6615 made several compression related options dynamically changeable. They are moved to MutableCFOptions. However, they are not copied back to ColumnFamilyOptions, so the changed values are not written to option files and for some other uses. Fix it by copying them back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6668
Test Plan: Add a unit test to make sure that when a MutableCFOptions is converted to CFOptions and back to MutableCFOptions, they stay the same. This test would fail without the fix.
Reviewed By: ajkr
Differential Revision: D20923999
fbshipit-source-id: c3bccd6923b00d677764e2269bed6a95ad7ed780
Summary:
This commit is fixing a bug that readrandom test returns many NotFound in db_bench from Version 6.2.
Pull Request resolved: https://github.com/facebook/rocksdb/issues/6664
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6665
Reviewed By: cheng-chang
Differential Revision: D20911298
Pulled By: ajkr
fbshipit-source-id: c2658d4dbb35798ccbf67dff6e64923fb731ef81
Summary:
Although there are tests related to locking in transaction_test, this new test directly tests against TransactionLockMgr.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6599
Test Plan: make transaction_lock_mgr_test && ./transaction_lock_mgr_test
Reviewed By: lth
Differential Revision: D20673749
Pulled By: cheng-chang
fbshipit-source-id: 1fa4a13218e68d785f5a99924556751a8c5c0f31
Summary:
This change is fixing a crash happening in getApproximateSizes JNI implementation. It also reenables Java test that was crashing most likelly because if this bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6652
Reviewed By: cheng-chang
Differential Revision: D20874865
Pulled By: pdillinger
fbshipit-source-id: da95516f15e5df2efe1a4e5690a2ce172cb53f87
Summary:
Adding a Java API for rocksdb::CancelAllBackgroundWork() so that the user can call this (when required) before closing the DB. This is to **prevent the crashes when manual compaction is running and the user decides to close the DB**.
Calling CancelAllBackgroundWork() seems to be the recommended way to make sure that it's safe to close the DB (according to RocksDB FAQ: https://github.com/facebook/rocksdb/wiki/RocksDB-FAQ#basic-readwrite).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6657
Reviewed By: cheng-chang
Differential Revision: D20896395
Pulled By: pdillinger
fbshipit-source-id: 8a8208c10093db09bd35db9af362211897870d96
Summary:
It was incorrectly counting time even for blocks that didn't need decompression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6658
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D20883522
Pulled By: anand1976
fbshipit-source-id: 33c9c4683f54cad150ab260a69e3ef8aa9aff76a
Summary:
Adding a simple timer support to schedule work at a fixed time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6543
Test Plan: TODO: clean up the unit tests, and make them better.
Reviewed By: siying
Differential Revision: D20465390
Pulled By: sagar0
fbshipit-source-id: cba143f70b6339863e1d0f8b8bf92e51c2b3d678
Summary:
The raw key bytes are currently dumped directly into the log messages,
which is not ideal if the keys aren't ASCII strings. Null bytes in
particular can cut off bits of the message early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6616
Reviewed By: ajkr
Differential Revision: D20879218
Pulled By: anand1976
fbshipit-source-id: 825a20715fe6d8012c0163c6e7b8159f7926a1a7
Summary:
When Travis times out, it's hard to determine whether
the last executing thing took an excessively long time or the
sum of all the work just exceeded the time limit. This
change inserts some timestamps in the output that should
make this easier to determine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6643
Test Plan: CI (Travis mostly)
Reviewed By: anand1976
Differential Revision: D20843901
Pulled By: pdillinger
fbshipit-source-id: e7aae5434b0c609931feddf238ce4355964488b7
Summary:
https://github.com/facebook/rocksdb/pull/6262 causes CLANG analyze to complain. Add assertion to suppress the warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6641
Test Plan: Run "clang analyze" and make sure it passes.
Reviewed By: anand1976
Differential Revision: D20841722
fbshipit-source-id: 5fa6e0c5cfe7a822214c9b898a408df59d4fd2cd
Summary:
This is a predecessor to the Configurable PR. This change moves the OptionTypeInfo maps closer to where they will be used.
When the Configurable changes are adopted, these values will become static and not associated with the OptionsHelper.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6198
Reviewed By: siying
Differential Revision: D20778108
Pulled By: zhichao-cao
fbshipit-source-id: a9f85fc73bc53503656e1958ecc1e764052fd1aa
Summary:
I suspect LRUCache could use some optimization, and to support
such an effort, a good benchmarking tool is needed. The existing
cache_bench was heavily skewed toward insertion and lookup misses, and
did not saturate memory with other work. This change should improve
those things to better resemble a real workload.
(All below using clang compiler, for some consistency, but not
necessarily same version and settings.)
The real workload is from production MySQL on RocksDB, filtering stacks
containing "LRU", "ShardedCache" or "CacheShard."
Lookup inclusive: 66%
Insert inclusive: 17%
Release inclusive: 15%
An alternate simulated workload is MySQL running a LinkBench read test:
Lookup inclusive: 54%
Insert inclusive: 24%
Release inclusive: 21%
cache_bench default settings, prior to this change:
Lookup inclusive: 35.8%
Insert inclusive: 63.6%
Release inclusive: 0%
cache_bench after this change (intended as somewhat "tighter" workload
than average production, more like LinkBench):
Lookup inclusive: 52%
Insert inclusive: 20%
Release inclusive: 26%
And top exclusive stacks (portion of stack samples as filtered above):
Production MySQL:
LRUHandleTable::FindPointer: 25.3%
rocksdb::operator==: 15.1% <-- Slice ==
LRUCacheShard::LRU_Remove: 13.8%
ShardedCache::Lookup: 8.9%
__pthread_mutex_lock: 7.1%
LRUCacheShard::LRU_Insert: 6.3%
MurmurHash64A: 4.8% <-- Since upgraded to XXH3p
...
Old cache_bench:
LRUHandleTable::FindPointer: 23.6%
__pthread_mutex_lock: 15.0%
__pthread_mutex_unlock_usercnt: 11.7%
__lll_lock_wait: 8.6%
__lll_unlock_wake: 6.8%
LRUCacheShard::LRU_Insert: 6.0%
ShardedCache::Lookup: 4.4%
LRUCacheShard::LRU_Remove: 2.8%
...
rocksdb::operator==: 0.2% <-- Slice ==
...
New cache_bench:
LRUHandleTable::FindPointer: 22.8%
__pthread_mutex_unlock_usercnt: 14.3%
rocksdb::operator==: 10.5% <-- Slice ==
LRUCacheShard::LRU_Insert: 9.0%
__pthread_mutex_lock: 5.9%
LRUCacheShard::LRU_Remove: 5.0%
...
ShardedCache::Lookup: 2.9%
...
So there's a bit more lock contention in the benchmark than in
production, but otherwise looks similar enough to me. At least it's a
big improvement over the existing code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6629
Test Plan: No production code changes, ran cache_bench with ASAN
Reviewed By: ltamasi
Differential Revision: D20824318
Pulled By: pdillinger
fbshipit-source-id: 6f8dc5891ead0f87edbed3a615ecd5289d9abe12
Summary:
In CompactionManifestWriteRetryableError in error_handler_fs_test, the manifest write of flush should pass with no fs error. After flush, fs is set to error status and the manifest write of compaction should fail due to the IO Error. Currently, the manifest write of flush is not synced with the compaction in order, which might cause manifest write fails, which will cause test failure. Fixed by adding the LoadDependency of sync-point after flush and before compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6637
Test Plan: pass error_hanlder_fs_tes. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20826969
Pulled By: zhichao-cao
fbshipit-source-id: fb2e702caa19bd63c82570320536b7acda870ff1
Summary:
With https://github.com/facebook/rocksdb/issues/6262, TSAN complains about data race of some variables. Those variables are used to estimate file size and are accessed in writer and background threads. Since file size estimation doesn't have to be 100% accurate, we make some variables atomic and use relaxed memory order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6636
Test Plan: Run all tests with TSAN.
Reviewed By: anand1976
Differential Revision: D20820635
fbshipit-source-id: 1ea45ff38be15e33674ffe06b7d42fc9fe161ea5
Summary:
With https://github.com/facebook/rocksdb/issues/6262, UBSAN fails with "division by zero":
[ RUN ] Timestamp/DBBasicTestWithTimestampCompressionSettings.PutAndGetWithCompaction/3
internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:1066:39: runtime error: division by zero
#0 0x7ffb3117b071 in rocksdb::BlockBasedTableBuilder::WriteRawBlock(rocksdb::Slice const&, rocksdb::CompressionType, rocksdb::BlockHandle*, bool) internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:1066
https://github.com/facebook/rocksdb/issues/1 0x7ffb311775e1 in rocksdb::BlockBasedTableBuilder::WriteBlock(rocksdb::Slice const&, rocksdb::BlockHandle*, bool) internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:848
https://github.com/facebook/rocksdb/issues/2 0x7ffb311771a2 in rocksdb::BlockBasedTableBuilder::WriteBlock(rocksdb::BlockBuilder*, rocksdb::BlockHandle*, bool) internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:832
This is caused by not returning immediately after CompressAndVerifyBlock call
in WriteBlock when rep_->status == kBuffered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6633
Test Plan: Run all existing test.
Reviewed By: anand1976
Differential Revision: D20808366
fbshipit-source-id: 09f24b7c0fbaf4c7a8fc48cac61fa6fcb9b85811
Summary:
Does what it says on the can. Similarly to table files, we need to re-persist
the metadata of live blob files whenever a new manifest file is opened.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6630
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D20802126
Pulled By: ltamasi
fbshipit-source-id: 5738692d898790293bf09d66e9997369bbf89566
Summary:
Add `encrypt_data_time` and `decrypt_data_time` perf_context counters to time encryption/decryption time when `EnvEncryption` is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6596
Test Plan: CI
Reviewed By: anand1976
Differential Revision: D20678617
fbshipit-source-id: 7b57536143aa38509cde011f704de33382169e07
Summary:
This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262
Reviewed By: ajkr
Differential Revision: D20651306
fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb
Summary:
https://github.com/facebook/rocksdb/issues/6247 reports that when write buffer manager fails to insert the dummy entry to block cache, null pointer is still stored and used to release the handle and cause corruption. Fix the bug by not releasing it with null handle.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6619
Test Plan: Add a unit test that fails without the fix.
Reviewed By: ajkr
Differential Revision: D20776769
fbshipit-source-id: 4127fbd9f295a0a3e45774746ffcd91f939f6287
Summary:
These three options should be made dynamically changeable. Simply add them to MutableCFOptions and made the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6615
Test Plan: Add a unit test to make sure that SetOptions() can change the options.
Reviewed By: riversand963
Differential Revision: D20755951
fbshipit-source-id: 8165f4fd7a7a665cc7fb049698935022a5d2e7ff
Summary:
For FIFO compaction, we use flush time instead of oldest key time as the
creation time. This is to prevent FIFO compaction dropping files whose oldest
key time is older than TTL but which has newer keys than TTL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6612
Test Plan: make check
Reviewed By: siying
Differential Revision: D20748217
Pulled By: riversand963
fbshipit-source-id: 3f7b00a847020760537cdddd12f6fe039e5bc663
Summary:
The checksum generator should be released if file_writer fails to reset the pointer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6611
Test Plan: pass make asan_check
Reviewed By: riversand963
Differential Revision: D20742964
Pulled By: zhichao-cao
fbshipit-source-id: cde41be2edb3d1e56083c2b93e1510fb32556146
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600
Test Plan: tested with make asan_check
Reviewed By: riversand963
Differential Revision: D20717670
Pulled By: zhichao-cao
fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.
This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602
Test Plan: make check
Reviewed By: siying, zhichao-cao
Differential Revision: D20683216
Pulled By: cheng-chang
fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
Summary:
1. If expiration_time is non-positive, no need to call NowMicros, save a syscall.
2. expire_time should only be set when expired is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6586
Test Plan: make check
Reviewed By: lth
Differential Revision: D20673730
Pulled By: cheng-chang
fbshipit-source-id: a69e8d7b16dc6d0d00487bb1c19f0710d79482e2
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
The last key may hit index of out bound exception when id = 9.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6574
Reviewed By: riversand963
Differential Revision: D20699791
Pulled By: cheng-chang
fbshipit-source-id: 8e2c5be5ff0e53e9857cfd59cea97cff21446819
Summary:
This test was written like a stress test, using up to 3x26GB
RSS memory during parallel 'make check'. Now, while this code is mostly
dormant, I've made the "for Travis" versions of the expensive tests the
canonical versions and disabled the expensive versions. This has the
side benefit of removing some arbitrary conditional compilation.
For unknown reason, the super expensive tests were gated on
Snappy_Supported, which appears to be irrelevant, so I removed it.
The tests can be fixed / improved / migrated to stress test if/when they
are deemed important again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6601
Test Plan:
make check + CI
./persistent_cache_test Before:
...
[==========] 10 tests from 2 test cases ran. (114541 ms total)
[ PASSED ] 10 tests.
YOU HAVE 1 DISABLED TEST
After:
...
[==========] 3 tests from 2 test cases ran. (1714 ms total)
[ PASSED ] 3 tests.
YOU HAVE 10 DISABLED TESTS
Reviewed By: siying
Differential Revision: D20680983
Pulled By: pdillinger
fbshipit-source-id: 2be0fde13eeb0a71110ac7f5477cfe63996a509e
Summary:
The patch adds a couple of classes to represent metadata about
blob files: `SharedBlobFileMetaData` contains the information elements
that are immutable (once the blob file is closed), e.g. blob file number,
total number and size of blob files, checksum method/value, while
`BlobFileMetaData` contains attributes that can vary across versions like
the amount of garbage in the file. There is a single `SharedBlobFileMetaData`
for each blob file, which is jointly owned by the `BlobFileMetaData` objects
that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s
and can also be shared if the (immutable _and_ mutable) state of the blob file
is the same in two versions.
In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends
`VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those
containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata
to a new `VersionStorageInfo`. Consistency checks are also extended to ensure
that table files point to blob files that are part of the `Version`, and that all blob files
that are part of any given `Version` have at least some _non_-garbage data in them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D20656803
Pulled By: ltamasi
fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
Summary:
As the first step of reintroducing eviction statistics for the block
cache, the patch switches from using simple function pointers as deleters
to function objects implementing an interface. This will enable using
deleters that have state, like a smart pointer to the statistics object
that is to be updated when an entry is removed from the cache. For now,
the patch adds a deleter template class `SimpleDeleter`, which simply
casts the `value` pointer to its original type and calls `delete` or
`delete[]` on it as appropriate. Note: to prevent object lifecycle
issues, deleters must outlive the cache entries referring to them;
`SimpleDeleter` ensures this by using the ("leaky") Meyers singleton
pattern.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6545
Test Plan: `make asan_check`
Reviewed By: siying
Differential Revision: D20475823
Pulled By: ltamasi
fbshipit-source-id: fe354c33dd96d9bafc094605462352305449a22a
Summary:
Forward compatibility with new defaults only starts from 5.16
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6598
Test Plan: facebook automated test (so much easier than running myself)
Reviewed By: riversand963
Differential Revision: D20665553
Pulled By: pdillinger
fbshipit-source-id: b846bfaccf4d0946f92d323a3b4ee6e3e548df93
Summary:
And add releases that should have been added before (6.6 - 6.8)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6594
Test Plan: facebook automated test (so much easier than running myself)
Reviewed By: riversand963
Differential Revision: D20649106
Pulled By: pdillinger
fbshipit-source-id: 78832449d9295580282cebf117e3968362fbdc69
Summary:
Version 4 has been around long enough, for compatibility and
extensive validation, that it should be default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6582
Test Plan:
CI (w.r.t. changing the default; format_version=4 is well
tested and massively in production at Facebook)
Reviewed By: siying
Differential Revision: D20625233
Pulled By: pdillinger
fbshipit-source-id: 2f83ed874cffa4a39bc7a66cdf3833b978fbb948
Summary:
In automatic compaction, if a compaction is bottommost, it goes to bottom thread pool. We should do the same for manual compaction too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6593
Test Plan: Add a unit test. See all existing tests pass.
Reviewed By: ajkr
Differential Revision: D20637408
fbshipit-source-id: cb03031e8f895085f7acf6d2d65e69e84c9ddef3
Summary:
Create a thread in DeleteScheduler only when delete rate limit is set
because when there is no rate limit on deletion, a thread per DeleteScheduler
consumes unnecessary resources.
Test Plan: make -j64 check
Reviewed By: riversand963
Differential Revision: D20538138
Pulled By: akankshamahajan15
fbshipit-source-id: 137499e810e817156345c30d627f8678b9adadf7
Summary:
Add timestamp support for MultiGet().
timestamp from readoptions is honored, and timestamps can be returned along with values.
MultiReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 17bef7d3a):
multireadrandom : 104.173 micros/op 307167 ops/sec; (5462999 of 5462999 found)
This PR:
multireadrandom : 104.199 micros/op 307095 ops/sec; (5307999 of 5307999 found)
.\db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=multireadrandom --use_existing_db=1 --num=25000000 --threads=32 --allow_concurrent_memtable_write=0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6483
Reviewed By: anand1976
Differential Revision: D20498373
Pulled By: riversand963
fbshipit-source-id: 8505f22bc40fd791bc7dd05e48d7e67c91edb627
Summary:
When applying a new version in non DB open case, optimize_filters_for_hits is used for max_threads, which is clearly a bug. It is not clear what the indented value in the first place, but it value 1 makes sense here, which would create no extra threads. This bug is not expected to cause user visible problems, assuming C++ implicitly cast bool to 0 or 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6576
Test Plan: Run all exsiting test.
Reviewed By: ajkr
Differential Revision: D20602467
fbshipit-source-id: 40b2cd8619aba09ae9242b36c415464db3c9b737
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.
This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
has some stray calls to Env APIs rather than FileSystem, they will go
through the same object and thus there is no risk of getting out of
sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```
Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552
Reviewed By: riversand963
Differential Revision: D20592038
Pulled By: anand1976
fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
Summary:
`scratch` is not initialized in `Align` because it will be set outside of it. But clang analyzer is strict on initializing it before return.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6577
Test Plan: make analyze
Reviewed By: siying
Differential Revision: D20607303
Pulled By: cheng-chang
fbshipit-source-id: 2843d759345a057a8e122178d30b90deff0f9b2a
Summary:
The MultiGet test in db_basic_test fails in CircleCI vs2019. The reason is that even Snappy compression is enabled, the first compression type is still kNoCompression. This PR checks the list and ensure that only when compression is enable and the compression type is valid, compression will be enabled. Such that, it will not fail the combined read test in MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6578
Test Plan: make check, db_basic_test.
Reviewed By: anand1976
Differential Revision: D20607529
Pulled By: zhichao-cao
fbshipit-source-id: dcead264d5c2da105912c18caad34b8510bb04b0
Summary:
Fix LITE build by excluding some unit tests that use features not supported in LITE.
```
db/db_basic_test.cc:1778:8: error: ‘void rocksdb::{anonymous}::TableFileListener::OnTableFileCreated(const rocksdb::TableFileCreationInfo&)’ marked ‘override’, but does not override
void OnTableFileCreated(const TableFileCreationInfo& info) override {
^~~~~~~~~~~~~~~~~~
make: *** [db/db_basic_test.o] Error 1
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6575
Reviewed By: ltamasi
Differential Revision: D20598598
Pulled By: riversand963
fbshipit-source-id: 367f7cb2500360ad57030b138a94c0f731a04339
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
By supporting direct IO in RandomAccessFileReader::MultiRead, the benefits of parallel IO (IO uring) and direct IO can be combined.
In direct IO mode, read requests are aligned and merged together before being issued to RandomAccessFile::MultiRead, so blocks in the original requests might share the same underlying buffer, the shared buffers are returned in `aligned_bufs`, which is a new parameter of the `MultiRead` API.
For example, suppose alignment requirement for direct IO is 4KB, one request is (offset: 1KB, len: 1KB), another request is (offset: 3KB, len: 1KB), then since they all belong to page (offset: 0, len: 4KB), `MultiRead` only reads the page with direct IO into a buffer on heap, and returns 2 Slices referencing regions in that same buffer. See `random_access_file_reader_test.cc` for more examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6446
Test Plan: Added a new test `random_access_file_reader_test.cc`.
Reviewed By: anand1976
Differential Revision: D20097518
Pulled By: cheng-chang
fbshipit-source-id: ca48a8faf9c3af146465c102ef6b266a363e78d1
Summary:
When `use_direct_reads` and `use_direct_writes` are `false`, `logical_sector_size_` inside various `*File` implementations are not actually used, so `GetLogicalBlockSize` does not necessarily need to be called for `logical_sector_size_`, just set a default page size.
This is a follow up PR for https://github.com/facebook/rocksdb/pull/6457.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6522
Test Plan: make check
Reviewed By: siying
Differential Revision: D20408885
Pulled By: cheng-chang
fbshipit-source-id: f2d3808f41265237e7fa2c0be9f084f8fa97fe3d
Summary:
When building RocksDB on VS2015, an error shows up with
hash_map.h(39): error C2719: 'value': formal parameter with requested alignment of 8 won't be aligned
Making the reference a reference can solve the problem, and there isn't a reason we can't do that, at least for the current use of the hash map.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6567
Test Plan: See CI tests pass.
Reviewed By: pdillinger
Differential Revision: D20548543
fbshipit-source-id: 255b55d74cf68a0b324e6f504c56608a97ea6276
Summary:
This commit fixes an incorrect version of this change that was previously landed.
On recently adding ARM64 and PPC64LE builds to Travis, we
seem to have hit some parallel build limits that dramatically increased
queue times.
This change majorly limits the configurations for ARM64 and PPC64LE to
build on each pull request, but keeps the large matrix for branch
builds.
In the process, I changed some previously excluded osx build configurations
to happen in branch builds.
NB: we might want to move master branch Travis build to daily trigger
rather than push trigger to further reduce contention.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6557
Test Plan: Travis only
Reviewed By: siying
Differential Revision: D20563425
Pulled By: pdillinger
fbshipit-source-id: d619eb9f196486ed000364aa40de4661f0b1029d
Summary: TestPilot uses two flags to determine whether coverage is already instrumented: `fbcode_macros` and `coverage`. Normally, these two tags are added automatically to cpp tests, but this is a fake cpp test, so we must manually add them. The first is easy - `fbcode_macros` is added by the `custom_unittest` library, which is in `fbcode_macros`, so it is appropriate. The second is harder - we need to verify that we should add the macro. We do this using the `coverage.bzl` functions.
Reviewed By: siying
Differential Revision: D20549040
fbshipit-source-id: d2732b3ec26f3dff065efdf398abe3241075bb2f
Summary:
On recently adding ARM64 and PPC64LE builds to Travis, we
seem to have hit some parallel build limits that dramatically increased
queue times.
This change majorly limits the configurations for ARM64 and PPC64LE to
build on each pull request, but keeps the large matrix for branch
builds.
In the process, I changed some previously excluded osx build configurations
to happen in branch builds.
NB: we might want to move master branch Travis build to daily trigger
rather than push trigger to further reduce contention.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6557
Test Plan: Travis only
Reviewed By: siying
Differential Revision: D20524575
Pulled By: pdillinger
fbshipit-source-id: babcb2c64e195679e472473a1cbdf42de47231ff
Summary:
Each time RocksDB switches to a new MANIFEST file from old one, it calls WriteCurrentStateToManifest() which writes a 'snapshot' of the current in-memory state of versions to the beginning of the new manifest as a bunch of version edits. We can distinguish these version edits from other version edits written during normal operations with a custom, safe-to-ignore tag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6530
Test Plan: added test to version_edit_test, pass make asan_check
Reviewed By: riversand963
Differential Revision: D20524516
Pulled By: zhichao-cao
fbshipit-source-id: f1de102f5499bfa88dae3caa2f32c7f42cf904db
Summary:
The whole point of the pimpl idiom is to hide implementation details.
Internal helper methods like `CheckConsistency`, `CheckConsistencyForDeletes`,
and `MaybeAddFile` do not belong in the public interface of the class.
In addition, the patch switches to `unique_ptr` for the implementation
object instead of using a raw `delete`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6556
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D20523568
Pulled By: ltamasi
fbshipit-source-id: 5bbb0ccebd0c47a33b815398c7f9cfe13bd775ac
Summary:
Currently, `db_stress` tests a randomly picked one of `GetLiveFiles`,
`GetSortedWalFiles`, and `GetCurrentWalFile` with a 1/N chance when the
command line parameter `get_live_files_and_wal_files_one_in` is specified.
The problem is that `GetSortedWalFiles` and `GetCurrentWalFile` are unreliable
in the sense that they can return errors if another thread removes a WAL file
while they are executing (which is a perfectly plausible and legitimate scenario).
The patch splits this command line parameter into three (one for each API),
and changes the crash test script so that only `GetLiveFiles` is tested during
our continuous crash test runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6491
Test Plan:
```
make check
python tools/db_crashtest.py whitebox
```
Reviewed By: siying
Differential Revision: D20312200
Pulled By: ltamasi
fbshipit-source-id: e7c3481eddfe3bd3d5349476e34abc9eee5b7dc8
Summary:
ldb and sst_dump are most important tools and they don't dependend on gflags. In cmake, we don't have an way to only build these two tools and exclude other tools. This is inconvenient if the environment has a problem with gflags. Add such an option WITH_CORE_TOOLS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6506
Test Plan: cmake and build with WITH_TOOLS and without.
Differential Revision: D20473029
fbshipit-source-id: 3d730fd14bbae6eeeae7f9cc9aec50a4e488ad72
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6553
Test Plan:
```
$ make valgrind_test -j24
$ ./folly_synchronization_distributed_mutex_test
DistributedMutex is not supported in ROCKSDB_LITE, on ARM, or in valgrind_test runs
```
Reviewed By: pdillinger
Differential Revision: D20501966
Pulled By: ltamasi
fbshipit-source-id: 386ec5f258f89d0781a36c5b390c665787093a74
Summary:
https://github.com/facebook/rocksdb/pull/6531 removed some code in partitioned index seek logic. By mistake the logic of storing previous index offset is removed, while the logic of using it is preserved, so that the code might use wrong value to determine reseeking condition.
This will trigger a bug, if following a Seek() not going to the last block, SeekToLast() is called, and then Seek() is called which should position the cursor to the block before SeekToLast().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6551
Test Plan: Add a unit test that reproduces the bug. In the same unit test, also some reseek cases are covered to avoid regression.
Reviewed By: pdillinger
Differential Revision: D20493990
fbshipit-source-id: 3919aa4861c0481ec96844e053048da1a934b91d
Summary:
Reduce runtime by reducing test scale to avoid test time-outs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6546
Test Plan:
time ./db_with_timestamp_basic_test
and watch internal tests.
Reviewed By: zhichao-cao
Differential Revision: D20479292
Pulled By: riversand963
fbshipit-source-id: c9e4a155be7699dd4de60fa531de86d442a3ba0a
Summary:
Define a private member variable only in debug mode. Without fix, build will fail
```
In file included from table/block_based/partitioned_index_iterator.cc:9:
./table/block_based/partitioned_index_iterator.h:125:32: error: private field 'icomp_' is not used [-Werror,-Wunused-private-field]
const InternalKeyComparator& icomp_;
```
Test plan (dev server)
1. make check
2. Make sure fixed in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6547
Reviewed By: siying
Differential Revision: D20480027
Pulled By: pdillinger
fbshipit-source-id: 288bc94280e240c3136335b6c73eb1ccb0db459d
Summary:
For s390x support, some updates in newer version of Align.h are
needed. Upgrading just that file as best we can, with one addition to
Portability.h and tweaking new code in Align.h to use C++11 only (no
non-trivial constexpr functions).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6534
Test Plan: CI, further work in PR https://github.com/facebook/rocksdb/issues/6168
Differential Revision: D20445942
Pulled By: pdillinger
fbshipit-source-id: 0cef3c367463c71f3123d12cdf287c573af5e342
Summary:
There was an alignment bug in our copy of the streaming APIs
for XXH3 (which we dubbed "XXH3p" for "preview" release). Since those
APIs are unused and some values for XXH3 have changed since XXH3p, I'm
simply removing those APIs, expecting it's better to use finalized XXH3
function if/when we decide to use those APIs (e.g. for checksums).
Fixes https://github.com/facebook/rocksdb/issues/6508
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6540
Test Plan: make check
Differential Revision: D20479271
Pulled By: pdillinger
fbshipit-source-id: 246cf1690d614d3b31042b563d249de32dec1e0d
Summary:
When using custom Env, trying to call DestroyDB() with default Options will
fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6539
Test Plan: ./db_stress
Differential Revision: D20476204
Pulled By: riversand963
fbshipit-source-id: 612c6754660cc9b5bb3e9c2dbb2f6ecd7f648797
Summary:
I start to see following failures:
tools/db_bench_tool.cc: In constructor ‘rocksdb::NormalDistribution::NormalDistribution(unsigned int, unsigned int)’:
tools/db_bench_tool.cc:1528:58: error: declaration of ‘max’ shadows a member of 'this' [-Werror=shadow]
NormalDistribution(unsigned int min, unsigned int max) :
^
tools/db_bench_tool.cc:1528:58: error: declaration of ‘min’ shadows a member of 'this' [-Werror=shadow]
tools/db_bench_tool.cc: In constructor ‘rocksdb::UniformDistribution::UniformDistribution(unsigned int, unsigned int)’:
tools/db_bench_tool.cc:1546:59: error: declaration of ‘max’ shadows a member of 'this' [-Werror=shadow]
UniformDistribution(unsigned int min, unsigned int max) :
^
tools/db_bench_tool.cc:1546:59: error: declaration of ‘min’ shadows a member of 'this' [-Werror=shadow]
when I build from GCC 4.8. Rename those variables to fix the problem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6537
Test Plan: make all with the compiler that used to show the failure.
Differential Revision: D20448741
fbshipit-source-id: 18bcf012dbe020f22f79038a9b08f447befa2574
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.
This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531
Test Plan: build using make and cmake. And build release
Differential Revision: D20473108
fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
Summary:
If DB is not deleted, in concurrent test, the tests might fail because of the previously existing DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6532
Test Plan:
make clean && make -j24 LITE=1 db_logical_block_size_cache_test && ./db_logical_block_size_cache_test
make clean && make -j24 db_logical_block_size_cache_test && ./db_logical_block_size_cache_test
Differential Revision: D20454734
Pulled By: cheng-chang
fbshipit-source-id: 8abede2ec1d79c1a4fe1bc95fbda489f8f7ee052
Summary:
After we had a lot of failures with maven.org downloads, we
wanted an alternative location for downloading binary dependencies.
Hosting them through github would have been good in terms of
organizational and network dependencies, but that approach seems to be
awkward (fake releases, so would need a 'rocksdb-deps' repo) and
strangely complicated for Facebook policy on open source repositories.
This commit moves the downloads (that are not officially hosted by
others on github) from my personal rocksdb fork to an S3 bucket owned
by the Facebook RocksDB AWS account. Facebook employees can access
this through an internal tool, and we should be able to grant permission
to outside collaborators.
Assuming this works out, I will back-port to older branches to stabilize
their CI testing as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6526
Test Plan: CI
Differential Revision: D20430130
Pulled By: pdillinger
fbshipit-source-id: df52394a65e0a57942db3039bdaade8a4d520cb2
Summary:
In some of the test, db_basic_test may cause time out due to its long running time. Separate the timestamp related test from db_basic_test to avoid the potential issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6516
Test Plan: pass make asan_check
Differential Revision: D20423922
Pulled By: zhichao-cao
fbshipit-source-id: d6306f89a8de55b07bf57233e4554c09ef1fe23a
Summary:
block_based_table_reader.cc is a giant file, which makes it hard for users to navigate the code. Divide the files to multiple files.
Some class templates cannot be moved to .cc file. They are moved to .h files. It is still better than including them all in block_based_table_reader.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6527
Test Plan: "make all check" and "make release". Also build using cmake.
Differential Revision: D20428455
fbshipit-source-id: ca713c698469f07f35bc0c271358c0874ed4eb28
Summary:
This patch based on https://github.com/facebook/rocksdb/issues/5932 offers a better solution to add arm64 to TravisCI matrix.
Really thank adamretter for initiating Arm CI setup.
Difference comparing to amd64:
1. For CMake, as no official arm64 release ready on Kitware page,
a third party (conda-forge) released one is used instead of
building from source. The main reason is to save CI time.
2. Explicit export JAVA_HOME on arm64
3. Disable mingw test
Signed-off-by: Yuqi Gu <yuqi.gu@arm.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6436
Differential Revision: D20428505
Pulled By: pdillinger
fbshipit-source-id: 81ef02435e41480bb71710b783d85ebf452ce926
Summary:
tcc gtest runner need to know the location of the binary in order to collect coverage. We can give them the location in an environment variable.
Note that all these tests will break in tpx currently, though this is a bug in rocksdb's wrapper script, not tpx.
Reviewed By: siying
Differential Revision: D20430043
fbshipit-source-id: c77d5f70bbc28f6011c6f91906bce2ceecc2f167
Summary:
In DBLogicalBlockSizeCacheTest, do not test OpenForReadOnly in LITE mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6523
Test Plan: watch test for LITE mode
Differential Revision: D20420321
Pulled By: cheng-chang
fbshipit-source-id: e45bf6f2800206d6f8ce9af7308e76a08de80643
Summary:
In the `.travis.yml` file the `jdk: openjdk7` element is ignored when `language: cpp`. So whatever version of the JDK that was installed in the Travis container was used - typically JDK 11.
To ensure our RocksJava builds are working, we now instead install and use OpenJDK 8. Ideally we would use OpenJDK 7, as RocksJava supports Java 7, but many of the newer Travis containers don't support Java 7, so Java 8 is the next best thing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6512
Differential Revision: D20388296
Pulled By: pdillinger
fbshipit-source-id: 8bbe6b59b70cfab7fe81ff63867d907fefdd2df1
Summary:
fix a few build warnings that are treated as failures with more strict MSVC warning settings
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6517
Differential Revision: D20401325
Pulled By: pdillinger
fbshipit-source-id: b44979dfaafdc7b3b8cb44a565400a99b331dd30
Summary:
Remove copy of pairs from the for range loop
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6514
Test Plan: make check
Differential Revision: D20389688
Pulled By: cheng-chang
fbshipit-source-id: 1c772091f955be33267514010f3596c61a6f46b5
Summary:
In Linux, when reopening DB with many SST files, profiling shows that 100% system cpu time spent for a couple of seconds for `GetLogicalBufferSize`. This slows down MyRocks' recovery time when site is down.
This PR introduces two new APIs:
1. `Env::RegisterDbPaths` and `Env::UnregisterDbPaths` lets `DB` tell the env when it starts or stops using its database directories . The `PosixFileSystem` takes this opportunity to set up a cache from database directories to the corresponding logical block sizes.
2. `LogicalBlockSizeCache` is defined only for OS_LINUX to cache the logical block sizes.
Other modifications:
1. rename `logical buffer size` to `logical block size` to be consistent with Linux terms.
2. declare `GetLogicalBlockSize` in `PosixHelper` to expose it to `PosixFileSystem`.
3. change the functions `IOError` and `IOStatus` in `env/io_posix.h` to have external linkage since they are used in other translation units too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6457
Test Plan:
1. A new unit test is added for `LogicalBlockSizeCache` in `env/io_posix_test.cc`.
2. A new integration test is added for `DB` operations related to the cache in `db/db_logical_block_size_cache_test.cc`.
`make check`
Differential Revision: D20131243
Pulled By: cheng-chang
fbshipit-source-id: 3077c50f8065c0bffb544d8f49fb10bba9408d04
Summary:
When users fail to open a DB with file lock failure, it is sometimes hard for users to debug. We now include the time the lock is acquired and the thread ID that acquired the lock, to help users debug problems like this. Default Env's thread ID is used.
Since type of lockedFiles is changed, rename it to follow naming convention too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6507
Test Plan: Add a unit test and improve an existing test to validate the case.
Differential Revision: D20378333
fbshipit-source-id: 312fe0e9733fd1d1e9969c321b90ce523cf4708a
Summary:
* **macOS version:** 10.15.2 (Catalina)
* **XCode/Clang version:** Apple clang version 11.0.0 (clang-1100.0.33.16)
Before this bugfix the error generated is:
```
In file included from ./util/compression.h:23:
./snappy-1.1.7/snappy.h:76:59: error: unknown type name 'string'; did you mean 'std::string'?
size_t Compress(const char* input, size_t input_length, string* output);
^~~~~~
std::string
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/iosfwd:211:65: note: 'std::string' declared here
typedef basic_string<char, char_traits<char>, allocator<char> > string;
^
In file included from db/builder.cc:10:
In file included from ./db/builder.h:12:
In file included from ./db/range_tombstone_fragmenter.h:15:
In file included from ./db/pinned_iterators_manager.h:12:
In file included from ./table/internal_iterator.h:13:
In file included from ./table/format.h:25:
In file included from ./options/cf_options.h:14:
In file included from ./util/compression.h:23:
./snappy-1.1.7/snappy.h:85:19: error: unknown type name 'string'; did you mean 'std::string'?
string* uncompressed);
^~~~~~
std::string
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/iosfwd:211:65: note: 'std::string' declared here
typedef basic_string<char, char_traits<char>, allocator<char> > string;
^
2 errors generated.
make: *** [jls/db/builder.o] Error 1
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6496
Differential Revision: D20389254
Pulled By: pdillinger
fbshipit-source-id: 2864245c8d0dba7b2ab81294241a62f2adf02e20
Summary:
This helps to diagnose errors in the CMake build where it tries to retrieve dependencies.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6511
Differential Revision: D20387392
Pulled By: pdillinger
fbshipit-source-id: 7028dfd62704bcc747f39ff864ea9c9bf51cd1be
Summary:
It's never too soon to refactor something. The patch splits the recently
introduced (`VersionEdit` related) `BlobFileState` into two classes
`BlobFileAddition` and `BlobFileGarbage`. The idea is that once blob files
are closed, they are immutable, and the only thing that changes is the
amount of garbage in them. In the new design, `BlobFileAddition` contains
the immutable attributes (currently, the count and total size of all blobs, checksum
method, and checksum value), while `BlobFileGarbage` contains the mutable
GC-related information elements (count and total size of garbage blobs). This is a
better fit for the GC logic and is more consistent with how SST files are handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6502
Test Plan: `make check`
Differential Revision: D20348352
Pulled By: ltamasi
fbshipit-source-id: ff93f0121e80ab15e0e0a6525ba0d6af16a0e008
Summary:
Add sequence_number_ptr to the checkpoint interface to expose the sequence number during taking the checkpoint. The number will be consistent with the seq # in rocksdb log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5528
Test Plan: make check -j64
Reviewed By: Winger1994
Differential Revision: D16080209
fbshipit-source-id: 6dc3c7680287ee97d673c5e61f89aae1f43e33df
Summary:
Allow user to specify options.max_open_files != -1 with FIFO compaction.
If max_open_files != -1, not all table files are kept open.
In the past, FIFO style compaction requires all table files to be open in order
to read file creation time from table properties. Later, we added file creation
time to MANIFEST, making it possible to read file creation time without opening
file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6503
Test Plan: make check
Differential Revision: D20353758
Pulled By: riversand963
fbshipit-source-id: ba5c61a648419e47e9ef6d74e0e280e3ee24f296
Summary:
Preliminary support for iterator with user timestamp. Current implementation does not consider merge operator and reverse iterator. Auto compaction is also disabled in unit tests.
Create an iterator with timestamp.
```
...
read_opts.timestamp = &ts;
auto* iter = db->NewIterator(read_opts);
// target is key without timestamp.
for (iter->Seek(target); iter->Valid(); iter->Next()) {}
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {}
delete iter;
read_opts.timestamp = &ts1;
// lower_bound and upper_bound are without timestamp.
read_opts.iterate_lower_bound = &lower_bound;
read_opts.iterate_upper_bound = &upper_bound;
auto* iter1 = db->NewIterator(read_opts);
// Do Seek or SeekToFirst()
delete iter1;
```
Test plan (dev server)
```
$make check
```
Simple benchmarking (dev server)
1. The overhead introduced by this PR even when timestamp is disabled.
key size: 16 bytes
value size: 100 bytes
Entries: 1000000
Data reside in main memory, and try to stress iterator.
Repeated three times on master and this PR.
- Seek without next
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3
```
master: 159047.0 ops/sec
this PR: 158922.3 ops/sec (2% drop in throughput)
- Seek and next 10 times
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3 -seek_nexts=10
```
master: 109539.3 ops/sec
this PR: 107519.7 ops/sec (2% drop in throughput)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6255
Differential Revision: D19438227
Pulled By: riversand963
fbshipit-source-id: b66b4979486f8474619f4aa6bdd88598870b0746
Summary:
In direct IO mode, RandomAccessFileReader::Read allocates an internal aligned buffer, and then copies the result into the scratch buffer. If the result is only temporarily used inside a function, there is no need to do the memcpy and just let the result Slice refer to the internally allocated buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6455
Test Plan: make check
Differential Revision: D20106753
Pulled By: cheng-chang
fbshipit-source-id: 44f505843837bba47a56e3fa2c4dd3bd76486b58
Summary:
In most places in the code the variable names are spelled correctly as
COMMITTED but in a couple places not. This fixes them and ensures the
variable is always called COMMITTED everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6481
Differential Revision: D20306776
Pulled By: pdillinger
fbshipit-source-id: b6c1bfe41db559b4bc6955c530934460c07f7022
Summary:
`TruncateLastLogAfterRecoverWithoutFlush` case depends on fallocate support
of underlying file system.
On a file system which lacks of this feature, like zfs, it will fail to allocate predefined file size as this test case intends to do;
So a check block is added to detect fallocate support and skip test if not.
The related work is done by JunHe77. Thanks!
Signed-off-by: Yuqi Gu <yuqi.gu@arm.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6437
Differential Revision: D20145032
Pulled By: pdillinger
fbshipit-source-id: c8b691dc508e95acfa2a004ddbc07e2faa76680d
Summary:
In CompactRange, if there is no key in memtable falling in the specified range, then flush is skipped.
This PR extends this skipping logic to SST file levels: it starts compaction from the highest level (starting from L0) that has files with key falling in the specified range, instead of always starts from L0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6482
Test Plan:
A new test ManualCompactionTest::SkipLevel is added.
Also updated a test related to statistics of index block cache hit in db_test2, the index cache hit is increased by 1 in this PR because when checking overlap for the key range in L0, OverlapWithLevelIterator will do a seek in the table cache iterator, which will read from the cached index.
Also updated db_compaction_test and db_test to use correct range for full compaction.
Differential Revision: D20251149
Pulled By: cheng-chang
fbshipit-source-id: f822157cf4796972bd5035d9d7178d8dfb7af08b
Summary:
In the current code base, we can use FaultInjectionTestEnv to simulate the env issue such as file write/read errors, which are used in most of the test. The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. This PR implement the FaultInjectionTestFS, which can be used to simulate when File System has issues such as IO error. user can specify any IOStatus error as input, such that FS corresponding actions will return certain error to the caller.
A set of ErrorHandlerFSTests are introduced for testing
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6414
Test Plan: pass make asan_check, pass error_handler_fs_test.
Differential Revision: D20252421
Pulled By: zhichao-cao
fbshipit-source-id: e922038f8ce7e6d1da329fd0bba7283c4b779a21
Summary:
Check for sys/auxv.h and getauxval before using them as they are not
always available (for example on uclibc)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6359
Differential Revision: D20239797
fbshipit-source-id: 175a098094d81545628c2372e7c388e70a32fd48
Summary:
this silences following warning from clang-11
```
rocksdb/db/db_impl/db_impl_compaction_flush.cc:1040:21: warning: loop variable 'newf' of type 'const std::pair<int, rocksdb::FileMetaData>' creates a copy from type 'const
std::pair<int\
, rocksdb::FileMetaData>' [-Wrange-loop-analysis]
for (const auto newf : c->edit()->GetNewFiles()) {
^
rocksdb/db/db_impl/db_impl_compaction_flush.cc:1040:10: note: use reference type 'const std::pair<int, rocksdb::FileMetaData> &' to prevent copying
for (const auto newf : c->edit()->GetNewFiles()) {
^~~~~~~~~~~~~~~~~
&
```
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6477
Differential Revision: D20211850
Pulled By: ltamasi
fbshipit-source-id: 3e89e13a12bba79f1b934d46b7c4c0576cdafb01
Summary:
When DBImpl::GetCreationTimeOfOldestFile() calls Version::GetCreationTimeOfOldestFile(), the version is not directly or indirectly referenced, so an event like compaction can race with the operation and cause DBImpl::GetCreationTimeOfOldestFile() to access delocated data. This was caught by an ASAN run:
==268==ERROR: AddressSanitizer: heap-use-after-free on address 0x612000b7d198 at pc 0x000018332913 bp 0x7f391510d310 sp 0x7f391510d308
READ of size 8 at 0x612000b7d198 thread T845 (store_load-33)
SCARINESS: 51 (8-byte-read-heap-use-after-free)
#0 0x18332912 in rocksdb::Version::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/src/db/version_set.cc:1488
https://github.com/facebook/rocksdb/issues/1 0x1803ddaa in rocksdb::DBImpl::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/src/db/db_impl/db_impl.cc:4499
https://github.com/facebook/rocksdb/issues/2 0xe24ca09 in rocksdb::StackableDB::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/utilities/stackable_db.h:392
......
0x612000b7d198 is located 216 bytes inside of 296-byte region [0x612000b7d0c0,0x612000b7d1e8)
freed by thread T28 here:
......
https://github.com/facebook/rocksdb/issues/5 0x1832c73f in std::vector<rocksdb::FileMetaData*, std::allocator<rocksdb::FileMetaData*> >::~vector() third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/stl_vector.h:435
https://github.com/facebook/rocksdb/issues/6 0x1832c73f in rocksdb::VersionStorageInfo::~VersionStorageInfo() rocksdb/src/db/version_set.cc:734
https://github.com/facebook/rocksdb/issues/7 0x1832cf42 in rocksdb::Version::~Version() rocksdb/src/db/version_set.cc:758
https://github.com/facebook/rocksdb/issues/8 0x9d1bb5 in rocksdb::Version::Unref() rocksdb/src/db/version_set.cc:2869
https://github.com/facebook/rocksdb/issues/9 0x183e7631 in rocksdb::Compaction::~Compaction() rocksdb/src/db/compaction/compaction.cc:275
https://github.com/facebook/rocksdb/issues/10 0x9e6de6 in std::default_delete<rocksdb::Compaction>::operator()(rocksdb::Compaction*) const third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/unique_ptr.h:78
https://github.com/facebook/rocksdb/issues/11 0x9e6de6 in std::unique_ptr<rocksdb::Compaction, std::default_delete<rocksdb::Compaction> >::reset(rocksdb::Compaction*) third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/unique_ptr.h:376
https://github.com/facebook/rocksdb/issues/12 0x9e6de6 in rocksdb::DBImpl::BackgroundCompaction(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2826
https://github.com/facebook/rocksdb/issues/13 0x9ac3b8 in rocksdb::DBImpl::BackgroundCallCompaction(rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2320
https://github.com/facebook/rocksdb/issues/14 0x9abff7 in rocksdb::DBImpl::BGWorkCompaction(void*) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2096
......
Fix the issue by reference the super version and use the referenced version from it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6473
Test Plan: Run ASAN for all existing tests.
Differential Revision: D20196416
fbshipit-source-id: 5f4a7918110fc7b8dd7841932d376bc9d1e59d6f
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468
Test Plan: pass make asan_check
Differential Revision: D20195261
Pulled By: zhichao-cao
fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
Summary:
Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included.
ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 72ee067b9):
101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found)
This PR:
100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found)
./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409
Differential Revision: D20200086
Pulled By: riversand963
fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
Summary:
Both clangd and cquery-language-server requires a compile_commands.json file to
index the project. This file can be ignored by git.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6472
Differential Revision: D20194899
Pulled By: riversand963
fbshipit-source-id: ea1587f2e5d10b7591147073b61efe262a1cf747
Summary:
Some combinatino of --index_with_first_key and --index_shortening_mode can signifcantly improve performance for large values. Expose them in db_bench.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5859
Test Plan: Run them with the new options and observe the behavior.
Differential Revision: D20104434
fbshipit-source-id: 21d48a732a9caf20b82312c7d7557d747ea3c304
Summary:
MultiRead tests in env_test cannot simulate the io_uring case when queries need to be submitted in multiple rounds. Add a new unit test to cover up more requests per MultiRead
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6452
Test Plan: Run it and see it pass when liburing is enabled or not enabled.
Differential Revision: D20078924
fbshipit-source-id: 6cff7fe345a4c5aa47135186e6181bf00df02b68
Summary:
Today `WriteUnpreparedTxn::RollbackInternal` will write the rollback batch assuming that there is only a single subbatch. However, because untracked_keys_ are currently not deduplicated, it's possible for duplicate keys to exist, and thus split the batch. Also, tracked_keys_ also does not support compators outside of the bytewise comparators, so it's possible for duplicates to occur there as well.
To solve this, just pass in the correct subbatch count.
Also, removed `WriteUnpreparedRollbackPreReleaseCallback` to unify the Commit/Rollback codepaths some more.
Also, fixed a bug in `CommitInternal` where if 1. two_write_queue is true and 2. include_data is true, then `WriteUnpreparedCommitEntryPreReleaseCallback` ends up calling `AddCommitted` on the commit time write batch a second time on the second write. To fix, `WriteUnpreparedCommitEntryPreReleaseCallback` is re-initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6463
Differential Revision: D20150153
Pulled By: lth
fbshipit-source-id: df0b42d39406c75af73df995aa1138f0db539cd1
Summary:
If file is not mmaped, CuckooTableReader should not try to read table properties from the file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6453
Test Plan: Added a new unit test
Differential Revision: D20103334
Pulled By: cheng-chang
fbshipit-source-id: 48539f14d93f6c1ebe12c3df5a14719e9d7b8726
Summary:
Original author: jeffrey-xiao
If we are writing a global seqno for an ingested file, the range
tombstone metablock gets accessed and put into the cache during
ingestion preparation. At the time, the global seqno of the ingested
file has not yet been determined, so the cached block will not have a
global seqno. When the file is ingested and we read its range tombstone
metablock, it will be returned from the cache with no global seqno. In
that case, we use the actual seqnos stored in the range tombstones,
which are all zero, so the tombstones cover nothing.
This commit removes global_seqno_ variable from Block. When iterating
over a block, the global seqno for the block is determined by the
iterator instead of storing this mutable attribute in Block.
Additionally, this commit adds a regression test to check that keys are
deleted when ingesting a file with a global seqno and range deletion
tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6429
Differential Revision: D19961563
Pulled By: ajkr
fbshipit-source-id: 5cf777397fa3e452401f0bf0364b0750492487b7
Summary:
BlobDB currently does not keep track of blob files: no records are written to
the manifest when a blob file is added or removed, and upon opening a database,
the list of blob files is populated simply based on the contents of the blob directory.
This means that lost blob files cannot be detected at the moment. We plan to solve
this issue by making blob files a part of `Version`; as a first step, this patch makes
it possible to store information about blob files in `VersionEdit`. Currently, this information
includes blob file number, total number and size of all blobs, and total number and size
of garbage blobs. However, the format is extensible: new fields can be added in
both a forward compatible and a forward incompatible manner if needed (similarly
to `kNewFile4`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6416
Test Plan: `make check`
Differential Revision: D19894234
Pulled By: ltamasi
fbshipit-source-id: f9753e1f2aedf6dadb70c09b345207cb9c58c329
Summary:
The known bug of liburing has been fixed. Now we can re-enable liburing under Linux
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6451
Test Plan: Watch internal CI
Differential Revision: D20079009
fbshipit-source-id: 04a6f53a900ff721f9a62a188cf906771b5d68d2
Summary:
Make kPageSize extern const size_t (used in draft https://github.com/facebook/rocksdb/issues/6427)
Make kLitteEndian constexpr bool
Clarify a couple of comments
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6443
Test Plan: make check, CI
Differential Revision: D20044558
Pulled By: pdillinger
fbshipit-source-id: e0c5cc13229c82726280dc0ddcba4078346b8418
Summary:
The logic that handles io_uring partial results was wrong. Fix the logic by putting it into a queue and continue reading.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6441
Test Plan: Make sure this patch fixes the application test case where the bug was discovered; in env_test, add a unit test that simulates partial results and make sure the results are still correct.
Differential Revision: D20018616
fbshipit-source-id: 5398a7e34d74c26d52aa69dfd604e93e95d99c62
Summary:
Cleanup some code without any real change in functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6440
Differential Revision: D20015891
Pulled By: riversand963
fbshipit-source-id: 33e18754b0f002006a6d4805e9aaf84c0c8ad25a
Summary:
Adding a C API function to set `row_cache` on `rocksdb_options_t` as this functionality is missing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6442
Differential Revision: D20036813
Pulled By: riversand963
fbshipit-source-id: c1fa95ea343345fbc1e57961d0d048e0e79be373
Summary:
Currently, a new MANIFEST file is assigned a new file number when 1) no
MANIFEST is open, or 2) current MANIFEST file size exceeds a threshold. This is
not sufficient. There are cases when the caller explicitly specifies that a new
MANIFEST be created. For example, if user sets options.write_dbid_to_manifest = true,
and there are WAL files, then RocksDB will run into an issue during recovery.
`DBImpl::Recover()` will call `LogAndApply()` to write dbid. At this point, the db being
recovered creates a new MANIFEST, say, MANIFEST-000003. Since there are WALs,
`DBImpl::RecoverLogFiles` will be called. Towards the end of this function, we call
`LogAndApply(new_descriptor_log=true)`, which explicitly creates a new MANIFEST.
However, the manifest_file_number is wrong before this fix. Consequently, RocksDB
opens an existing, non-empty file for append, effectively truncating the file to zero.
If a crash occurs, then there will be data loss.
Test Plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6426
Test Plan: make check
Differential Revision: D19951866
Pulled By: riversand963
fbshipit-source-id: 4b1b9fc28d4fe2ac12764b388ef9e61f05e766da
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
We were removing the file from `log_recycle_files_` before renaming it
with `ReuseWritableFile()`. Since `ReuseWritableFile()` occurs outside
the DB mutex, it was possible for a concurrent full purge to sneak in
and delete the file before it could be renamed. Consequently, `SwitchMemtable()`
would fail and the DB would enter read-only mode.
The fix is to hold the old file number in `log_recycle_files_` until
after the file has been renamed. Full purge uses that list to decide
which files to keep, so it can no longer delete a file pending recycling.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5900
Test Plan: new unit test
Differential Revision: D19771719
Pulled By: ajkr
fbshipit-source-id: 094346349ca3fb499712e62de03905acc30b5ce8
Summary:
For write unprepared, some applications may bypass the transaction api, and write keys directly into the write batch. However, since they are not tracked, rollbacks (both for savepoint and transaction) are not aware that these keys have to be rolled back.
The fix is to track them in `WriteUnpreparedTxn::untracked_keys_`. This is populated whenever we flush unprepared batches into the DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6404
Differential Revision: D19842023
Pulled By: lth
fbshipit-source-id: a9edfc643d5c905fc89da9a9a9094d30c9b70108
Summary:
`index` can be replaced by `iter`, saving the computation of `index++`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6406
Test Plan: make check
Differential Revision: D19905056
Pulled By: cheng-chang
fbshipit-source-id: add4638959c0d2e4e77a11f3fa04ffabaf0de790
Summary:
Previously, when recovering version set, LoadTableHandlers failures are ignored.
If paranoid_checks is true, this failure should not be ignored, otherwise, the opened db might be in an inconsistent state.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6368
Test Plan: make check
Differential Revision: D19713459
Pulled By: cheng-chang
fbshipit-source-id: 68cb94f4f2cc43f8b024b14755193cd45cfcad55
Summary:
I create a new branch from the branch new upsteram/master and "git merge --squash".
Maybe it will fix everything.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6420
Differential Revision: D19897152
Pulled By: zhichao-cao
fbshipit-source-id: 6575d9e3b23e360f42ee1480b43028b5fcc20136
Summary:
During recovery, multiple (un)prepared batches could exist in the same WAL record due to group commit. This breaks an assertion in `MemTableInserter::MarkBeginPrepare`.
To fix, reset unprepared_batch_ to false after `MarkEndPrepare`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6419
Differential Revision: D19896148
Pulled By: lth
fbshipit-source-id: b1a32ef88f775a0881264a18bd1a4a5b8c85eee3
Summary:
Unfortunately, it seems like mysqld reuses xids across machine restarts. When that happens, we could have something like the following happening:
```
BEGIN_PREPARE(unprepared) Put(a) END_PREPARE(xid = 1)
-- crash and recover with Put(a) rolled back as it was not prepared
BEGIN_PREPARE(prepared) Put(b) END_PREPARE(xid = 1)
COMMIT(xid = 1)
-- crash and recover with both a, b
```
To solve this, we will have to log the rollback batch into the WAL during recovery.
WritePrepared already logs the rollback batch into the WAL, if a rollback happens after prepare, so there is no problem there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6418
Differential Revision: D19896151
Pulled By: lth
fbshipit-source-id: 2ff65ddc5fe75efd57736fed4b7cd7a109d26609
Summary:
A recent fix related to 2pc https://github.com/facebook/rocksdb/pull/6313/ writes something to WAL, but does not flush or sync. This causes assertion failure "impl->TEST_WALBufferIsEmpty()" if manual_wal_flush = true. We should fsync the entry to make sure a second power reset can recover.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6417
Test Plan: Add manual_wal_flush=true case in TransactionTest.DoubleCrashInRecovery and fix a bug in the test so that the bug can be reproduced. It passes with the fix.
Differential Revision: D19894537
fbshipit-source-id: f1e84e49e2269f583c6019743118292cd8b6598e
Summary:
The DecreaseNumBgThreads test keeps failing on Windows in AppVeyor.
It fails because it depends on a timed wait for the tasks to be dequeued from the threadpool's internal queue, but within the specified time, the task might have not been scheduled onto the newly created threads.
https://github.com/facebook/rocksdb/pull/6232 tries to fix this by waiting for longer time to let the threads scheduled.
This PR tries to fix this by replacing the timed wait with a synchronization on the task's internal conditional variable.
When the number of threads increases, instead of guessing the time needed for the task to be scheduled, it directly blocks on the conditional variable until the task starts running.
But when thread number is reduced, it still does a timed wait, but this does not lead to the flakiness now, will try to remove these timed waits in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6393
Test Plan: Wait to see whether AppVeyor tests pass.
Differential Revision: D19890928
Pulled By: cheng-chang
fbshipit-source-id: 4e56e4addf625c98c0876e62d9d57a6f0a156f76
Summary:
Since IO Uring feature is not stable. Remove it from buck configuration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6415
Test Plan: See internal build pass
Differential Revision: D19892988
fbshipit-source-id: 7fc01efc2af5ed707fb8e4e4674223aeb83cd5ea
Summary:
It's observed on Windows DestroyDB failed to remove the log file because the logger is still alive in sst file manager and holding a handle to the log file. This fix makes sure the logger is released before attempt to clear the database directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6308
Differential Revision: D19818829
Pulled By: riversand963
fbshipit-source-id: 54c3e6859aadaaba4a49b3e851b73dc35ec7dc6a
Summary:
Seems like this caused the following test failure on AppVeyor:
DBTest2.CrashInRecoveryMultipleCF
c:\projects\rocksdb\db\db_test_util.cc(107): error: DestroyDB(dbname_, options)
IO error: Failed to delete: C:\projects\rocksdb\db_tests\\testrocksdb-3112//db_test2_10791409581227174103/000013.sst: Access is denied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6410
Test Plan: Wait to see whether the AppVeyor test passes.
Differential Revision: D19879872
Pulled By: cheng-chang
fbshipit-source-id: 59a9c55ca88566e9210c0b715ecc45a4fd9afe26
Summary:
We realized bugs related to IO Uring. Turn it off by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6405
Test Plan: Manually run build_tools/build_detect_platform and observe outputs.
Differential Revision: D19862792
fbshipit-source-id: 5d5e8e2762997b72a145ae59389ef3d7e4ccd060
Summary:
Unrevert the previous fix to propagate error status, and an additional fix to not treat a memtable lookup MergeInProgress status as an error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6403
Test Plan:
Unit tests
Tried running stress tests but couldn't repro the stress failure
Differential Revision: D19846721
Pulled By: anand1976
fbshipit-source-id: 7db10cccbdc863d9b559497f0a46b608d2488ca4
Summary:
It is very useful to support direct ByteBuffers in Java. It allows to have zero memory copy and some serializers are using that directly so one do not need to create byte[] array for it.
This change also contains some fixes for Windows JNI build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/2283
Differential Revision: D19834971
Pulled By: pdillinger
fbshipit-source-id: 44173aa02afc9836c5498c592fd1ea95b6086e8e
Summary:
Before this fix, the info_log_level passed from CreateLoggerFromOptions() will
be ignored by AutoRollLogger::logger_. This PR fixes it by setting the info log
level of logger_ during ResetLogger().
Test plan (dev server):
```
COMPILE_WITH_TSAN=1 make all && make check
make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6388
Differential Revision: D19828045
Pulled By: riversand963
fbshipit-source-id: e1ac7de3a2090bee53b6c667f71a11f1774163e6
Summary:
This reverts commit d70011bccc. The commit is causing some stress test failure due to unexpected Status::MergeInProgress() return for some keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6401
Differential Revision: D19826623
Pulled By: anand1976
fbshipit-source-id: edd634cede9cb7bdd2cb8f46e662ea709b16d2f1
Summary:
1. remove AssertEmpty because calling methods on moved objects is discouraged.
2. add a test to assert that the internal buffer is moved instead of being copied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6399
Test Plan:
make slice_test && ./slice_test
USE_CLANG=1 make analyze
Differential Revision: D19825372
Pulled By: cheng-chang
fbshipit-source-id: 2e26f8ce5ec3edbfce067db045e80bd433e704f4
Summary:
Add a utility class `Defer` to defer the execution of a function until the Defer object goes out of scope.
Used in VersionSet:: ProcessManifestWrites as an example.
The inline comments for class `Defer` have more details.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6382
Test Plan: `make defer_test version_set_test && ./defer_test && ./version_set_test`
Differential Revision: D19797538
Pulled By: cheng-chang
fbshipit-source-id: b1a9b7306e4fd4f48ec2ab55783caa561a315f0f
Summary:
https://github.com/facebook/rocksdb/pull/6383 surfaced an issue with
`VersionSet`/`ReactiveVersionSet` and `AtomicGroupReadBuffer::AddEdit`
(which was added in https://github.com/facebook/rocksdb/pull/5411):
`AddEdit` moves the `VersionEdit` passed to it into `replay_buffer_`,
however, the client `VersionSet` classes keep using it afterwards. This
*seemed to* work before the refactoring but it really did not: since
`VersionEdit` used to have a user-declared destructor, no move
constructor/move assignment operator was generated, and the `move` in
`AddEdit` was really a copy. The patch makes the copy explicit. Note: it
should be possible to rework this logic so that we can get away
with the move but for now, this should fix the issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6400
Test Plan:
`make check`
`make analyze`
Differential Revision: D19824466
Pulled By: ltamasi
fbshipit-source-id: f38033967daf2a39c78dcd6e12978bafe37632b4
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
clang analysis shows following warning:
options/options_test.cc:1554:24: warning: The left operand of '-' is a garbage value
(file_size - 1) / readahead_size + 1);
~~~~~~~~~ ^
Explicitly initialize file_size and add an assertion to make clang analysis happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6398
Test Plan: Run "make analysis" and see the warning goes away.
Differential Revision: D19819662
fbshipit-source-id: 1589ea91c0c8f78242538f01448e4ad0e5fbc219
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6384
Test Plan: Wait and see the analysis result.
Differential Revision: D19781072
fbshipit-source-id: 75e7cb6ee619ebd289841eaabea03dd075c09d3b
Summary:
When `no_slowdown` is enabled, it returns `Status::Incomplete("Write stall")` if a stall would occur. This patch adds descriptive text for when `no_slowdown` and `low_pri` are enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6396
Differential Revision: D19808978
Pulled By: cheng-chang
fbshipit-source-id: a53b0d25ed414c821a086531e0222027f925e627
Summary:
External CMAKE projects cannot add own gtest target due to CMP0002 policy. We should not add gtest target unless we build with tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6377
Differential Revision: D19801708
fbshipit-source-id: 662484683e8737e10397ddb0d17705da5243c4f9
Summary:
Currently, any IO errors and checksum mismatches while reading data
blocks, are being ignored by the batched MultiGet. Its only looking at
the GetContext state. Fix that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6387
Test Plan: Add unit tests
Differential Revision: D19799819
Pulled By: anand1976
fbshipit-source-id: 46133dccbb04e64067b9fe6cda73e282203db969
Summary:
Fixed an error when compiled with -Og:
db/write_thread.cc:183:14: error: 'state' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6275
Differential Revision: D19381755
fbshipit-source-id: a90bf3cd4a7248d9d71219e918fc6253deb97e3c
Summary:
Right, when reading from option files, no readahead is used and 8KB buffer is used. It might introduce high latency if the file system provide high latency and doesn't do readahead. Instead, introduce a readahead to the file. When calling inside DB, infer the value from options.log_readahead. Otherwise, a default 512KB readahead size is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6372
Test Plan: Add --log_readahead_size in db_bench. Run it with several options and observe read size from option files using strace.
Differential Revision: D19727739
fbshipit-source-id: e6d8053b0a64259abc087f1f388b9cd66fa8a583
Summary:
It's logically correct for PinnableSlice to support move semantics to transfer ownership of the pinned memory region. This PR adds both move constructor and move assignment to PinnableSlice.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6374
Test Plan:
A set of unit tests for the move semantics are added in slice_test.
So `make slice_test && ./slice_test`.
Differential Revision: D19739254
Pulled By: cheng-chang
fbshipit-source-id: f898bd811bb05b2d87384ec58b645e9915e8e0b1
Summary:
This is a bunch of small improvements to `VersionEdit`. Namely, the patch
* Makes the names and order of variables, methods, and code chunks related
to the various information elements more consistent, and adds missing
getters for the sake of completeness.
* Initializes previously uninitialized stack variables.
* Marks all getters const to improve const correctness.
* Adds in-class initializers and removes the default ctor that would
create an object with uninitialized built-in fields and call `Clear`
afterwards.
* Adds a new type alias for new files and changes the existing `typedef`
for deleted files into a type alias as well.
* Makes the helper method `DecodeNewFile4From` private.
* Switches from long-winded iterator syntax to range based loops in a
couple of places.
* Fixes a couple of assignments where an integer 0 was assigned to
boolean members.
* Fixes a getter which used to return a `const std::string` instead of
the intended `const std::string&`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6383
Test Plan: make check
Differential Revision: D19780537
Pulled By: ltamasi
fbshipit-source-id: b0b4f09fee0ec0e7c7b7a6d76bfe5346e91824d0
Summary:
Since the logic for handling IDENTITY file is now inside `NewDB`, the comment above `NewDB` is no longer relevant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6379
Test Plan: not needed
Differential Revision: D19795440
Pulled By: cheng-chang
fbshipit-source-id: 0b1cca87ac6d92474701c46aa4c8d4d708bfa19b
Summary:
BlobDB keeps track of the mapping between SSTs and blob files using
the `OnFlushCompleted` and `OnCompactionCompleted` callbacks of
the `EventListener` interface: upon receiving a flush notification, a link
is added between the newly flushed SST and the corresponding blob file;
for compactions, links are removed for the inputs and added for the outputs.
The earlier code performed this link deletion and addition even for
trivially moved files; the new code walks through the two lists together
(in a fashion that's similar to merge sort) and skips such files.
This should mitigate https://github.com/facebook/rocksdb/issues/6338,
wherein an assertion is triggered with the earlier code when a compaction
notification for a trivial move precedes the flush notification for the
moved SST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6381
Test Plan: make check
Differential Revision: D19773729
Pulled By: ltamasi
fbshipit-source-id: ae0f273ded061110dd9334e8fb99b0d7786650b0
Summary:
The comments are for iterators, not Cleanable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6371
Test Plan: no need
Differential Revision: D19727527
Pulled By: cheng-chang
fbshipit-source-id: c74aeffa27ea0ce15a36ff6f9694826712cd1c70
Summary:
Several statuses were not checked during DB::Open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6380
Test Plan: make check
Differential Revision: D19780237
Pulled By: cheng-chang
fbshipit-source-id: c8d189d20344bd1607890dd1449345bda2ef96b9
Summary:
Before this fix, atomic flush codepath may hit an assertion failure on a specific failure case.
If all flush jobs within an atomic flush succeed (they do not write to MANIFEST), but batch writing version edits to MANIFEST fails, then `cfd->imm()->RollbackMemTableFlush()` will be called twice, and the second invocation hits assertion failure `assert(m->flush_in_progress_)` since the first invocation resets the variable `flush_in_progress_` to false already.
Test plan (dev server):
```
./db_flush_test --gtest_filter=DBAtomicFlushTest/DBAtomicFlushTest.RollbackAfterFailToInstallResults
make check
```
Both must succeed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6385
Differential Revision: D19782943
Pulled By: riversand963
fbshipit-source-id: 84e1592625e729d1b70fdc8479959387a74cb121
Summary:
In `DBSSTTest.SSTsWithLdbSuffixHandling`, some sst files are renamed to ldb files, the original intention of the test is to test that the ldb files can be loaded along with the sst files.
The original test checks this by `ASSERT_NE("NOT_FOUND", Get(Key(k)))`, but the problem is `Get(Key(k))` returns IO error due to path not found instead of NOT_FOUND, so the success of ASSERT_NE does not mean the key can be retrieved.
This PR updates the test to make sure Get(Key(k)) returns the original value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6370
Test Plan: make db_sst_test && ./db_sst_test
Differential Revision: D19726278
Pulled By: cheng-chang
fbshipit-source-id: 993127f56457b315e669af4eeb92d6f956b7a4b7
Summary:
We see some odd errors complaining math. However, it doesn't seem that it is needed to be included. Remove the include of math.h. Just removing it from db_bench doesn't seem to break anything. Replacing sqrt from std::sqrt seems to work for histogram.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6373
Test Plan: Watch Travis and appveyor to run.
Differential Revision: D19730068
fbshipit-source-id: d3ad41defcdd9f51c2da1a3673fb258f5dfacf47
Summary:
Before this PR it calls GetFileSize() once for each sst file in the DB. This can take a long time if there are be tens of thousands of sst files (e.g. in thousands of column families), and even longer if Env is talking to some remote service rather than local filesystem. This PR makes DB::Open() use sst file sizes that are already known from manifest (typically almost all files in the DB) and only call GetFileSize() for non-sst or obsolete files. Note that GetFileSize() is also called and checked against manifest in CheckConsistency(), so the calls in SstFileManagerImpl were completely redundant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6363
Test Plan: deployed to a test cluster, looked at a dump of Env calls (from a custom instrumented Env) - no more thousands of GetFileSize()s.
Differential Revision: D19702509
Pulled By: al13n321
fbshipit-source-id: 99f8110620cb2e9d0c092dfcdbb11f3af4ff8b73
Summary:
It's a minor refactoring. We have two ReadFileToString() but they are very similar. Make the one with Env argument calls the one with FS argument instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6366
Test Plan: Run all existing tests
Differential Revision: D19712332
fbshipit-source-id: 5ae6fabf6355938690d95cda52afd1f39e0a7823
Summary:
Right now RocksDB gets manifest file size before recovering from it. The information is available in LogReader. Use it instead to prevent one file system call.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6369
Test Plan: Run all existing tests
Differential Revision: D19714872
fbshipit-source-id: 0144be324d403c99e3da875ea2feccc8f64e883d
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
Fix an intermittent failure in
DBErrorHandlingTest.CompactionManifestWriteError due to a race between
background error recovery and the main test thread calling
TEST_WaitForCompact().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6367
Test Plan: Run the test using gtest_parallel
Differential Revision: D19713802
Pulled By: anand1976
fbshipit-source-id: 29e35dc26e0984fe8334c083e059f4fa1f335d68
Summary:
Right now when reading IDENTITY file, we use a very similar logic as ReadFileToString() while it does an extra file size check, which may be expensive in some file systems. There is no reason to duplicate the logic. Use ReadFileToString() instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6365
Test Plan: RUn all existing tests.
Differential Revision: D19709399
fbshipit-source-id: 3bac31f3b2471f98a0d2694278b41e9cd34040fe
Summary:
A relatively recent regression causes for every CF, create and open directory is called for the DB directory, unless CF has a private directory. This doesn't scale well with large number of column families.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6358
Test Plan: Run all existing tests and see it pass. strace with db_bench --num_column_families and observe it doesn't open directory for number of column families.
Differential Revision: D19675141
fbshipit-source-id: da01d9216f1dae3f03d4064fbd88ce71245bd9be
Summary:
MultiDBCompactionError fails when it verifies the number of files on level 0 and level 1 without waiting for compaction to finish.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6266
Differential Revision: D19701639
Pulled By: riversand963
fbshipit-source-id: e96d511bcde705075f073e0b550cebcd2ecfccdc
Summary:
This is a redesign of the API for RocksJava comparators with the aim of improving performance. It also simplifies the class hierarchy.
**NOTE**: This breaks backwards compatibility for existing 3rd party Comparators implemented in Java... so we need to consider carefully which release branches this goes into.
Previously when implementing a comparator in Java the developer had a choice of subclassing either `DirectComparator` or `Comparator` which would use direct and non-direct byte-buffers resepectively (via `DirectSlice` and `Slice`).
In this redesign there we have eliminated the overhead of using the Java Slice classes, and just use `ByteBuffer`s. The `ComparatorOptions` supplied when constructing a Comparator allow you to choose between direct and non-direct byte buffers by setting `useDirect`.
In addition, the `ComparatorOptions` now allow you to choose whether a ByteBuffer is reused over multiple comparator calls, by setting `maxReusedBufferSize > 0`. When buffers are reused, ComparatorOptions provides a choice of mutex type by setting `useAdaptiveMutex`.
---
[JMH benchmarks previously indicated](https://github.com/facebook/rocksdb/pull/6241#issue-356398306) that the difference between C++ and Java for implementing a comparator was ~7x slowdown in Java.
With these changes, when reusing buffers and guarding access to them via mutexes the slowdown is approximately the same. However, these changes offer a new facility to not reuse mutextes, which reduces the slowdown to ~5.5x in Java. We also offer a `thread_local` mechanism for reusing buffers, which reduces slowdown to ~5.2x in Java (closes https://github.com/facebook/rocksdb/pull/4425).
These changes also form a good base for further optimisation work such as further JNI lookup caching, and JNI critical.
---
These numbers were captured without jemalloc. With jemalloc, the performance improves for all tests, and the Java slowdown reduces to between 4.8x and 5.x.
```
ComparatorBenchmarks.put native_bytewise thrpt 25 124483.795 ± 2032.443 ops/s
ComparatorBenchmarks.put native_reverse_bytewise thrpt 25 114414.536 ± 3486.156 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 17228.250 ± 1288.546 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 16035.865 ± 1248.099 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_thread-local thrpt 25 21571.500 ± 871.521 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_adaptive-mutex thrpt 25 23613.773 ± 8465.660 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 16768.172 ± 5618.489 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_thread-local thrpt 25 23921.164 ± 8734.742 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_no-reuse thrpt 25 17899.684 ± 839.679 ops/s
ComparatorBenchmarks.put java_bytewise_direct_no-reuse thrpt 25 22148.316 ± 1215.527 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 11311.126 ± 820.602 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 11421.311 ± 807.210 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_thread-local thrpt 25 11554.005 ± 960.556 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_adaptive-mutex thrpt 25 22960.523 ± 1673.421 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 18293.317 ± 1434.601 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_thread-local thrpt 25 24479.361 ± 2157.306 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_no-reuse thrpt 25 7942.286 ± 626.170 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_no-reuse thrpt 25 11781.955 ± 1019.843 ops/s
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6252
Differential Revision: D19331064
Pulled By: pdillinger
fbshipit-source-id: 1f3b794e6a14162b2c3ffb943e8c0e64a0c03738
Summary:
DBTest2.ChangePrefixExtractor fails in LITE build because LITE build doesn't support adaptive build. Fix it by removing the stats check but only check correctness.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6356
Test Plan: Run the test with both of LITE and non-LITE build.
Differential Revision: D19669537
fbshipit-source-id: 6d7dd6c8a79f18e80ca1636864b9c71922030d8e
Summary:
Add a unit test for prefix extractor change, including a check that fails due to a bug.
Also comment out the partitioned filter case which will fail the test too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6323
Test Plan: Run the test and it passes (and fails if the SeekForPrev() part is uncommented)
Differential Revision: D19509744
fbshipit-source-id: 678202ca97b5503e9de73b54b90de9e5ba822b72
Summary:
Background jobs in WritePrepared DB might access the db via a snapshot checker callback. The stress tests therefore should cancel background jobs before deleting the db in ::Reopen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6355
Differential Revision: D19664132
Pulled By: maysamyabandeh
fbshipit-source-id: 6060a830e8aad0015c10448286ad37c8a346ac01
Summary:
Non-zero recycle_log_file_num is incompatible with kPointInTimeRecovery and kAbsoluteConsistency recovery modes. Currently SanitizeOptions changes the recovery mode to kTolerateCorruptedTailRecords, while to resolve this option conflict it makes more sense to compromise recycle_log_file_num, which is a performance feature, instead of wal_recovery_mode, which is a safety feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6351
Differential Revision: D19648931
Pulled By: maysamyabandeh
fbshipit-source-id: dd0bf78349edc007518a00c4d63931fd69294ad7
Summary:
Unit test names, together with other components, are used to create log files
during some internal testing. Overly long names cause infra failure due to file
names being too long.
Look for internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6352
Differential Revision: D19649307
Pulled By: riversand963
fbshipit-source-id: 6f29de096e33c0eaa87d9c8702f810eda50059e7
Summary:
I set up a mirror of our Java deps on github so we can download
them through github URLs rather than maven.org, which is proving
terribly unreliable from Travis builds.
Also sanitized calls to curl, so they are easier to read and
appropriately fail on download failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6348
Test Plan: CI
Differential Revision: D19633621
Pulled By: pdillinger
fbshipit-source-id: 7eb3f730953db2ead758dc94039c040f406790f3
Summary:
Fix for issue https://github.com/facebook/rocksdb/issues/6316
When an append/sync of the manifest file fails due to an IO error such
as NoSpace, we don't always put the DB in read-only mode. This is true
for flush and compactions, as well as foreground operatons such as column family
add/drop, CompactFiles etc. Subsequent changes to the DB will be
recorded in the same manifest file, which would have a corrupted record
in the middle due to the previous failure. On next DB::Open(), it will
fail to process the full manifest and data will be lost.
To fix this, we reset VersionSet::descriptor_log_ on append/sync
failure, which will force a new manifest file to be written on the next
append.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6331
Test Plan: Add new unit tests in error_handler_test.cc
Differential Revision: D19632951
Pulled By: anand1976
fbshipit-source-id: 68d527cb6e59a94cbbbf9f5a17a7f464381d51e3
Summary:
The patch adds statistics support to the new BlobDB garbage collection implementation;
namely, it adds support for the following (pre-existing) tickers:
`BLOB_DB_GC_NUM_FILES`: the number of blob files obsoleted by the GC logic.
`BLOB_DB_GC_NUM_NEW_FILES`: the number of new blob files generated by the GC logic.
`BLOB_DB_GC_FAILURES`: the number of failed GC passes (where a GC pass is
equivalent to a (sub)compaction).
`BLOB_DB_GC_NUM_KEYS_RELOCATED`: the number of blobs relocated to new blob
files by the GC logic.
`BLOB_DB_GC_BYTES_RELOCATED`: the total size of blobs relocated to new blob files.
The tickers `BLOB_DB_GC_NUM_KEYS_OVERWRITTEN`, `BLOB_DB_GC_NUM_KEYS_EXPIRED`,
`BLOB_DB_GC_BYTES_OVERWRITTEN`, `BLOB_DB_GC_BYTES_EXPIRED`, and
`BLOB_DB_GC_MICROS` are not relevant for the new GC logic, and are thus marked
deprecated.
The patch also adds a couple of log messages that log the number and total size of
blobs encountered and relocated during a GC pass, as well as the number of blob
files created and obsoleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6296
Test Plan: Extended unit tests and used the BlobDB mode of `db_bench`.
Differential Revision: D19402513
Pulled By: ltamasi
fbshipit-source-id: d53d2bfbf4928a1db1e9346c67ebb9007b8932ec
Summary:
DBTest2.AutoPrefixMode1 doesn't pass because auto prefix mode is not supported there.
Fix it by disabling the test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6346
Test Plan: Run DBTest2.AutoPrefixMode1 in lite mode
Differential Revision: D19627486
fbshipit-source-id: fbde75260aeecb7e6fc406e09c19a71a95aa5f08
Summary:
Difficult to root cause crash test failures without archiving
db dir. Now all crash test configurations should save the db dir.
Also exit with error code on bad command.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6344
Test Plan:
Hmm, how about this:
for TARGET in stress_crash asan_crash ubsan_crash tsan_crash; do EMAIL=email ONCALL=oncall TRIGGER=all SUBSCRIBER=sub build_tools/rocksdb-lego-determinator $TARGET > tmp && node -c tmp && grep -q Upload tmp || echo Bad; done
Differential Revision: D19625605
Pulled By: pdillinger
fbshipit-source-id: cb84aa93ee80b4534f4c61b90f0e0f99a41155d5
Summary:
db_bloom_filter_test break with clang LITE build with following message:
db/db_bloom_filter_test.cc:23:29: error: unused variable 'kPlainTable' [-Werror,-Wunused-const-variable]
static constexpr PseudoMode kPlainTable = -1;
^
Fix it by moving the declaration out of LITE build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6340
Test Plan:
USE_CLANG=1 LITE=1 make db_bloom_filter_test
and without LITE=1
Differential Revision: D19609834
fbshipit-source-id: 0e88f5c6759238a94f9880d84c785ac18e7cdd7e
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313
Differential Revision: D19458291
Pulled By: maysamyabandeh
fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
Summary:
Both changes are related to RocksJava:
1. Allow dependencies that are already present on the host system due to Maven to be reused in Docker builds.
2. Extend the `make clean-not-downloaded` target to RocksJava, so that libraries needed as dependencies for the test suite are not deleted and re-downloaded unnecessarily.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6318
Differential Revision: D19608742
Pulled By: pdillinger
fbshipit-source-id: 25e25649e3e3212b537ac4512b40e2e53dc02ae7
Summary:
Add a new option ReadOptions.auto_prefix_mode. When set to true, iterator should return the same result as total order seek, but may choose to do prefix seek internally, based on iterator upper bounds. Also fix two previous bugs when handling prefix extrator changes: (1) reverse iterator should not rely on upper bound to determine prefix. Fix it with skipping prefix check. (2) block-based filter is not handled properly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6314
Test Plan: (1) add a unit test; (2) add the check to stress test and run see whether it can pass at least one run.
Differential Revision: D19458717
fbshipit-source-id: 51c1bcc5cdd826c2469af201979a39600e779bce
Summary:
./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions passed 96 / 100 times.
```
With the fix: all runs (tried 100, 1000, 10000) succeed.
```
$ TEST_TMPDIR=/dev/shm ~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.LevelTtlCascadingCompactions --repeat=1000
[1000/1000] DBCompactionTest.LevelTtlCascadingCompactions (1895 ms)
```
Test Plan:
Build:
```
COMPILE_WITH_TSAN=1 make db_compaction_test -j100
```
Without the fix: a few runs out of 100 fail:
```
$ TEST_TMPDIR=/dev/shm KEEP_DB=1 ~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.LevelTtlCascadingCompactions --repeat=100
...
...
Note: Google Test filter = DBCompactionTest.LevelTtlCascadingCompactions
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBCompactionTest
[ RUN ] DBCompactionTest.LevelTtlCascadingCompactions
db/db_compaction_test.cc:3687: Failure
Expected equality of these values:
oldest_time
Which is: 1580155869
level_to_files[6][0].oldest_ancester_time
Which is: 1580155870
DB is still at /dev/shm//db_compaction_test_6337001442947696266
[ FAILED ] DBCompactionTest.LevelTtlCascadingCompactions (1432 ms)
[----------] 1 test from DBCompactionTest (1432 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (1433 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] DBCompactionTest.LevelTtlCascadingCompactions
1 FAILED TEST
[80/100] DBCompactionTest.LevelTtlCascadingCompactions returned/aborted with exit code 1 (1489 ms)
[100/100] DBCompactionTest.LevelTtlCascadingCompactions (1522 ms)
FAILED TESTS (4/100):
1419 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/90)
1434 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/84)
1457 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/82)
1489 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/74)
Differential Revision: D19587040
Pulled By: sagar0
fbshipit-source-id: 11191ae9940837643bff47ebe18b299b4be3d950
Summary:
Commits related to hash index fix have been reverted in 6.7.fb branch. Update HISTORY.md to keep it in sync.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6337
Differential Revision: D19593717
fbshipit-source-id: 466178dc6205c9e41ccced41bf281a0952bdc2ca
Summary:
It chooses the oldest memtable, not the largest one. This is an
important difference for users whose CFs receive non-uniform write
rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6335
Differential Revision: D19588865
Pulled By: maysamyabandeh
fbshipit-source-id: 62ad4325b0182f5f27858584cd73fd5978fb2cec
Summary:
https://github.com/facebook/rocksdb/pull/6028 introduces a bug for hash index in SST files. If a table reader is created when total order seek is used, prefix_extractor might be passed into table reader as null. While later when prefix seek is used, the same table reader used, hash index is checked but prefix extractor is null and the program would crash.
Fix the issue by fixing http://github.com/facebook/rocksdb/pull/6028 in the way that prefix_extractor is preserved but ReadOptions.total_order_seek is checked
Also, a null pointer check is added so that a bug like this won't cause segfault in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6328
Test Plan: Add a unit test that would fail without the fix. Stress test that reproduces the crash would pass.
Differential Revision: D19586751
fbshipit-source-id: 8de77690167ddf5a77a01e167cf89430b1bfba42
Summary:
Remove the redundant PartitionedFilterBlockBuilder::num_added_ and ::NumAdded since the parent class, FullFilterBlockBuilder, already provides them.
Also rename filters_in_partition_ and filters_per_partition_ to keys_added_to_partition_ and keys_per_partition_ to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6299
Test Plan: make check
Differential Revision: D19413278
Pulled By: pdillinger
fbshipit-source-id: 04926ee7874477d659cb2b6ae03f2d995fb747e5
Summary:
Adjusted history for 6.6.1 and 6.6.2, switched master version to 6.7.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6320
Differential Revision: D19499272
Pulled By: gfosco
fbshipit-source-id: 2bafb2456951f231e411e9c03aaa4c044f497684
Summary:
The function was left unimplemented. Although we currently don't have a use for that it was declared with an assert(0) to prevent mistakenly using the remove_prefix of the parent class. The function body with only assert(0) however causes issues with some compiler's warning levels. The patch implements the function to avoid the warning.
It also piggybacks some minor code warning for unnecessary semicolons after the function definition.s
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6330
Differential Revision: D19559062
Pulled By: maysamyabandeh
fbshipit-source-id: 3a022484f688c9abd4556e5412bcc2628ab96a00
Summary:
The earlier code used two conflicting definitions for the number of
input records going into a compaction, one based on the
`rocksdb.num.entries` table property and one based on
`CompactionIterationStats`. The first one is correct and in line
with how output records are counted, while the second one incorrectly
ignores input records in various cases when the `CompactionIterator`
advances or reseeks the input iterator (this can happen, amongst other
cases, when dealing with `SingleDelete`s, regular `Delete`s, `Merge`s,
and compaction filters). This can result in the code undercounting the
input records and computing an incorrect value for "records dropped"
during the compaction. The patch fixes this by switching over to the
correct (table property based) input record count for "records dropped".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6325
Test Plan: Tested using `make check` and `db_bench`.
Differential Revision: D19525491
Pulled By: ltamasi
fbshipit-source-id: 4340b0b2f41546db8e356db70ca02199e48fa636
Summary:
When there is a write stall, the active write group leader calls ```BeginWriteStall()``` to walk the queue of writers and remove any with the ```no_slowdown``` option set. There was a bug in the code which updated the back pointer but not the forward pointer (```link_newer```), corrupting the list and causing some threads to wait forever. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6322
Test Plan: Add a unit test in db_write_test
Differential Revision: D19538313
Pulled By: anand1976
fbshipit-source-id: 6fbed819e594913f435886606f5d36f74f235c3a
Summary:
This reverts commit 8e309b35bb.
The stress tests are failing . Revert it until we figure the root cause.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6327
Differential Revision: D19537657
Pulled By: maysamyabandeh
fbshipit-source-id: bf34a5dd720825957729e136e9a5a729a240e61a
Summary:
kHashSearch is incompatible with larger than 1 values for index_block_restart_interval. Setting it to 1 in stress tests would avoid confusion about the test parameters.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6324
Differential Revision: D19525669
Pulled By: maysamyabandeh
fbshipit-source-id: fbf3a797e0ebcebb4d32eba3728cf3583906fc8a
Summary:
This is a simple edit to have two #include file paths be consistent within range_del_aggregator.{h,cc} with everywhere else.
The impact of this inconsistency is that it actual breaks a Bazel based build on the Windows platform. The same pragma once failure occurs with both Windows Visual C++ 2019 and clang for Windows 9.0. Bazel's "sandboxing" of the builds causes both compilers to not properly recognize "rocksdb/types.h" and "include/rocksdb/types.h" to be the same file (also comparator.h). My guess is that the backslash versus forward slash mixing within path names is the underlying issue.
But, everything builds fine once the include paths in these two source files are consistent with the rest of the repository.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6321
Differential Revision: D19506585
Pulled By: ltamasi
fbshipit-source-id: 294c346607edc433ab99eaabc9c880ee7426817a
Summary:
Currently, this test case tries to infer whether
`VersionStorageInfo::UpdateAccumulatedStats` was called during open by
checking the number of files opened against an arbitrary threshold (10).
This makes the test brittle and results in sporadic failures. The patch
changes the test case to use sync points to directly test whether
`UpdateAccumulatedStats` was called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6306
Test Plan: `make check`
Differential Revision: D19439544
Pulled By: ltamasi
fbshipit-source-id: ceb7adf578222636a0f51740872d0278cd1a914f
Summary:
Block-based table has index has been disabled in crash test due to bugs. We fixed a bug and re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6310
Test Plan: Finish one round of "crash_test_with_atomic_flush" test successfully while exclusively running has index. Another run also ran for several hours without failure.
Differential Revision: D19455856
fbshipit-source-id: 1192752d2c1e81ed7e5c5c7a9481c841582d5274
Summary:
With many millions of keys, the old Bloom filter implementation
for the block-based table (format_version <= 4) would have excessive FP
rate due to the limitations of feeding the Bloom filter with a 32-bit hash.
This change computes an estimated inflated FP rate due to this effect
and warns in the log whenever an SST filter is constructed (almost
certainly a "full" not "partitioned" filter) that exceeds 1.5x FP rate
due to this effect. The detailed condition is only checked if 3 million
keys or more have been added to a filter, as this should be a lower
bound for common bits/key settings (< 20).
Recommended remedies include smaller SST file size, using
format_version >= 5 (for new Bloom filter), or using partitioned
filters.
This does not change behavior other than generating warnings for some
constructed filters using the old implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6317
Test Plan:
Example with warning, 15M keys @ 15 bits / key: (working_mem_size_mb is just to stop after building one filter if it's large)
$ ./filter_bench -quick -impl=0 -working_mem_size_mb=1 -bits_per_key=15 -average_keys_per_filter=15000000 2>&1 | grep 'FP rate'
[WARN] [/block_based/filter_policy.cc:292] Using legacy SST/BBT Bloom filter with excessive key count (15.0M @ 15bpk), causing estimated 1.8x higher filter FP rate. Consider using new Bloom with format_version>=5, smaller SST file size, or partitioned filters.
Predicted FP rate %: 0.766702
Average FP rate %: 0.66846
Example without warning (150K keys):
$ ./filter_bench -quick -impl=0 -working_mem_size_mb=1 -bits_per_key=15 -average_keys_per_filter=150000 2>&1 | grep 'FP rate'
Predicted FP rate %: 0.422857
Average FP rate %: 0.379301
$
With more samples at 15 bits/key:
150K keys -> no warning; actual: 0.379% FP rate (baseline)
1M keys -> no warning; actual: 0.396% FP rate, 1.045x
9M keys -> no warning; actual: 0.563% FP rate, 1.485x
10M keys -> warning (1.5x); actual: 0.564% FP rate, 1.488x
15M keys -> warning (1.8x); actual: 0.668% FP rate, 1.76x
25M keys -> warning (2.4x); actual: 0.880% FP rate, 2.32x
At 10 bits/key:
150K keys -> no warning; actual: 1.17% FP rate (baseline)
1M keys -> no warning; actual: 1.16% FP rate
10M keys -> no warning; actual: 1.32% FP rate, 1.13x
25M keys -> no warning; actual: 1.63% FP rate, 1.39x
35M keys -> warning (1.6x); actual: 1.81% FP rate, 1.55x
At 5 bits/key:
150K keys -> no warning; actual: 9.32% FP rate (baseline)
25M keys -> no warning; actual: 9.62% FP rate, 1.03x
200M keys -> no warning; actual: 12.2% FP rate, 1.31x
250M keys -> warning (1.5x); actual: 12.8% FP rate, 1.37x
300M keys -> warning (1.6x); actual: 13.4% FP rate, 1.43x
The reason for the modest inaccuracy at low bits/key is that the assumption of independence between a collision between 32-hash values feeding the filter and an FP in the filter is not quite true for implementations using "simple" logic to compute indices from the stock hash result. There's math on this in my dissertation, but I don't think it's worth the effort just for these extreme cases (> 100 million keys and low-ish bits/key).
Differential Revision: D19471715
Pulled By: pdillinger
fbshipit-source-id: f80c96893a09bf1152630ff0b964e5cdd7e35c68
Summary:
Help users that would benefit most from new Bloom filter
implementation by logging a warning that recommends the using
format_version >= 5.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6312
Test Plan:
$ (for BPK in 10 13 14 19 20 50; do ./filter_bench -quick -impl=0 -bits_per_key=$BPK -m_queries=1 2>&1; done) | grep 'its/key'
Bits/key actual: 10.0647
Bits/key actual: 13.0593
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (14) bits/key. Significant filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 14.0581
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (19) bits/key. Significant filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 19.0542
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (20) bits/key. Dramatic filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 20.0584
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (50) bits/key. Dramatic filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 50.0577
Differential Revision: D19457191
Pulled By: pdillinger
fbshipit-source-id: 073d94cde5c70e03a160f953e1100c15ea83eda4
Summary:
When we do concurrently writes, and different write operations will have WAL enable or disable.
But the data from write operation with WAL disabled will still be logged into log files, which will lead to extra disk write/sync since we do not want any guarantee for these part of data.
Detail can be found in https://github.com/facebook/rocksdb/issues/6280. This PR avoid mixing the two types in a write group. The advantage is simpler reasoning about the write group content
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6290
Differential Revision: D19448598
Pulled By: maysamyabandeh
fbshipit-source-id: 3d990a0f79a78ea1bfc90773f6ebafc1884c20de
Summary:
This PR adds a `rocksdb_options_set_atomic_flush` function to the C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6307
Differential Revision: D19451313
Pulled By: ltamasi
fbshipit-source-id: 750495642ef55b1ea7e13477f85c38cd6574849c
Summary:
A previous change meant to make db_stress to run on sync=1 mode for 1/20 of the time in crash_test, but a bug caused to to always run on sync=1 mode. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6304
Test Plan: Start and kill "python -u tools/db_crashtest.py --simple whitebox" multiple times and observe that most times sync=0 is used while some times sync=1 is used.
Differential Revision: D19433000
fbshipit-source-id: 7a0adba39b17a1b3acbbd791bb0cdb743b91fa95
Summary:
Recent bug fix related to hash index introduced a new bug: hash index can return NotFound but it is not handled by BlockBasedTable::Get(). The end result is that Get() stops being executed too early. Fix it by ignoring NotFound code in Get().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6305
Test Plan: A problematic DB used to return NotFound incorrectly, and now able to return correct result. Will try to construct a unit test too.0
Differential Revision: D19438925
fbshipit-source-id: e751afa8c13728d56511cfeb1bc811ecb99f3217
Summary:
https://github.com/facebook/rocksdb/pull/2205 introduced a new
configuration option called `max_background_jobs`, superseding the
earlier options `max_background_flushes` and
`max_background_compactions`. However, unlike
`max_background_compactions`, setting `max_background_jobs` dynamically
through the `SetDBOptions` interface does not adjust the size of the
thread pools (see https://github.com/facebook/rocksdb/issues/6298). The
patch fixes this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6300
Test Plan: Extended unit test.
Differential Revision: D19430899
Pulled By: ltamasi
fbshipit-source-id: 704006605b3c13c3d1b997ccc0831ee369721074
Summary:
Add asserts to show the intentions of result explicitly.
Add examples to show the effect of optimistic transaction more clearly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6074
Test Plan: `cd examples && make optimistic_transaction_example && ./optimistic_transaction_example`
Differential Revision: D18964309
Pulled By: cheng-chang
fbshipit-source-id: a524616ed9981edf2fd37ae61c5ed18c5cf25f55
Summary:
Recent fix to Prefix Hash https://github.com/facebook/rocksdb/pull/6292 caused a bug that the newly created NotFound status in hash index is never reset. This causes reseek or implict reseek to return wrong results sometimes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6302
Test Plan:
Add a unit test that would fail. Not fix.
crash test with hash test would fail in several seconds. With the fix, it will run about several minutes before failing with another failure.
Differential Revision: D19424572
fbshipit-source-id: c5276f36a95fd0e2837e30190476d2fe21ed8566
Summary:
As of 1/15/2020, Maven Central does not support plain HTTP. Because of
this, our Travis and AppVeyor builds have started failing during the
assertj download step. This patch will hopefully fix these issues.
See https://blog.sonatype.com/central-repository-moving-to-https
for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6301
Test Plan:
Will monitor the builds. ("I don't always test my changes but when I do,
I do it in production.")
Differential Revision: D19422923
Pulled By: ltamasi
fbshipit-source-id: 76f9a8564a5b66ddc721d705f9cbfc736bf7a97d
Summary:
When prefix is enabled the expected behavior when the prefix of the target does not exist is for Seek is to seek to any key larger than target and SeekToPrev to any key less than the target.
Currently. the prefix index (kHashSearch) returns OK status but sets Invalid() to indicate two cases: a prefix of the searched key does not exist, ii) the key is beyond the range of the keys in SST file. The SeekForPrev implementation in BlockBasedTable thus does not have enough information to know when it should set the index key to first (to return a key smaller than target). The patch fixes that by returning NotFound status for cases that the prefix does not exist. SeekForPrev in BlockBasedTable accordingly SeekToFirst instead of SeekToLast on the index iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6297
Test Plan: SeekForPrev of non-exsiting prefix is added to block_test.cc, and a test case is added in db_test2, which fails without the fix.
Differential Revision: D19404695
fbshipit-source-id: cafbbf95f8f60ff9ede9ccc99d25bfa1cf6fcdc3
Summary:
In addition to removing the earlier partially implemented garbage collection
logic from the BlobDB codebase, the patch also removes the test cases (as well as
the related sync points, as appropriate) that were only relevant for the old
implementation, and reworks the remaining ones so they use the new GC logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6278
Test Plan: `make check`
Differential Revision: D19335226
Pulled By: ltamasi
fbshipit-source-id: 0cc1794bc9892feda1426ed5522a318f3cb1b692
Summary:
A recent commit adds a unit test that uses a function not available in LITE build. Fix it by avoiding the call
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6295
Test Plan: Run the test in LITE build and see it passes.
Differential Revision: D19395678
fbshipit-source-id: 37b42835bae02511630d80f7cafb1179401bc033
Summary:
kHashSearch index type is incompatible with index_block_restart_interval larger than 1. The patch asserts that and also resets index_block_restart_interval value if it is incompatible with kHashSearch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6294
Differential Revision: D19394229
Pulled By: maysamyabandeh
fbshipit-source-id: 8a12712ab25e81094a7f71ecd43f773dd4fb6acd
Summary:
The fractional cascading index is not correctly generated when two files at the same level contains the same smallest or largest user key.
The result would be that it would hit an assertion in debug mode and lower level files might be skipped.
This might cause wrong results when the same user keys are of merge operands and Get() is called using the exact user key. In that case, the lower files would need to further checked.
The fix is to fix the fractional cascading index.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6285
Test Plan: Add a unit test which would cause the assertion which would be fixed.
Differential Revision: D19358426
fbshipit-source-id: 39b2b1558075fd95e99491d462a67f9f2298c48e
Summary:
This makes it easier to call the functions from Rust as otherwise they require mutable types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6283
Differential Revision: D19349991
Pulled By: wqfish
fbshipit-source-id: e8da7a75efe8cd97757baef8ca844a054f2519b4
Summary:
Look at all compaction input files to compute the oldest ancestor time.
In https://github.com/facebook/rocksdb/issues/5992 we changed how creation_time (aka oldest-ancestor-time) table property of compaction output files is computed from max(creation-time-of-all-compaction-inputs) to min(creation-time-of-all-inputs). This exposed a bug where, during compaction, the creation_time:s of only the L0 compaction inputs were being looked at, and all other input levels were being ignored. This PR fixes the issue.
Some TTL compactions when using Level-Style compactions might not have run due to this bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6279
Test Plan: Enhanced the unit tests to validate that the correct time is propagated to the compaction outputs.
Differential Revision: D19337812
Pulled By: sagar0
fbshipit-source-id: edf8a72f11e405e93032ff5f45590816debe0bb4
Summary:
unordered_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions.
The patch fixes that and also reverts the changes performed by https://github.com/facebook/rocksdb/pull/6254, in which max_successive_merges was mistakenly declared incompatible with unordered_write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6284
Differential Revision: D19356115
Pulled By: maysamyabandeh
fbshipit-source-id: f06dadec777622bd75f267361c022735cf8cecb6
Summary:
Fix compilation under LITE by putting `#ifndef ROCKSDB_LITE` around a code block.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6277
Differential Revision: D19334157
Pulled By: riversand963
fbshipit-source-id: 947111ed68aa550f5ea424b216c1442a8af9e32b
Summary:
Some shadow warning shows up when using gcc 4.8. An example:
./utilities/blob_db/blob_compaction_filter.h: In constructor ‘rocksdb::blob_db::BlobIndexCompactionFilterFactoryBase::BlobIndexCompactionFilterFactoryBase(rocksdb::blob_db::lobDBImpl*, rocksdb::Env*, rocksdb::Statistics*)’:
./utilities/blob_db/blob_compaction_filter.h:121:7: error: declaration of ‘blob_db_impl’ shadows a member of 'this' [-Werror=shadow]
: blob_db_impl_(blob_db_impl), env_(_env), statistics_(_statistics) {}
^
Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6242
Test Plan: Build and see the warnings go away.
Differential Revision: D19217789
fbshipit-source-id: 8ef631941f23dab47a388e060adec24b72efd65e
Summary:
Right now, when validating prefix iterator, if control iterator is invalidate but prefix iterator shows value, we determine it as a test failure. However, this fails to consider the case where a file or memtable containing a tombstone is filtered out by a prefix bloom filter. The fix is to relax the check in this case. If we are out of prefix range, then ignore the check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6269
Test Plan: Run crash_test for a short while and it still passes.
Differential Revision: D19317594
fbshipit-source-id: b964a1cdc1df5efe439d4b32f8023e1fbc8598c1
Summary:
The crash test is failing with non-ok status after TransactionDB::Open. This patch adds more debugging information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6272
Differential Revision: D19314527
Pulled By: maysamyabandeh
fbshipit-source-id: d45ecb0f2144e052fb4b5fdd483150440991a3b4
Summary:
This is the start of some JMH microbenchmarks for RocksJava.
Such benchmarks can help us decide on performance improvements of the Java API.
At the moment, I have only added benchmarks for various Comparator options, as that is one of the first areas where I want to improve performance. I plan to expand this to many more tests.
Details of how to compile and run the benchmarks are in the `README.md`.
A run of these on a XEON 3.5 GHz 4vCPU (QEMU Virtual CPU version 2.5+) / 8GB RAM KVM with Ubuntu 18.04, OpenJDK 1.8.0_232, and gcc 8.3.0 produced the following:
```
# Run complete. Total time: 01:43:17
REMEMBER: The numbers below are just data. To gain reusable insights, you need to follow up on
why the numbers are the way they are. Use profilers (see -prof, -lprof), design factorial
experiments, perform baseline and negative tests that provide experimental control, make sure
the benchmarking environment is safe on JVM/OS/HW level, ask for reviews from the domain experts.
Do not assume the numbers tell you what you want them to tell.
Benchmark (comparatorName) Mode Cnt Score Error Units
ComparatorBenchmarks.put native_bytewise thrpt 25 122373.920 ± 2200.538 ops/s
ComparatorBenchmarks.put java_bytewise_adaptive_mutex thrpt 25 17388.201 ± 1444.006 ops/s
ComparatorBenchmarks.put java_bytewise_non-adaptive_mutex thrpt 25 16887.150 ± 1632.204 ops/s
ComparatorBenchmarks.put java_direct_bytewise_adaptive_mutex thrpt 25 15644.572 ± 1791.189 ops/s
ComparatorBenchmarks.put java_direct_bytewise_non-adaptive_mutex thrpt 25 14869.601 ± 2252.135 ops/s
ComparatorBenchmarks.put native_reverse_bytewise thrpt 25 116528.735 ± 4168.797 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_adaptive_mutex thrpt 25 10651.975 ± 545.998 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-adaptive_mutex thrpt 25 10514.224 ± 930.069 ops/s
```
Indicating a ~7x difference between comparators implemented natively (C++) and those implemented in Java. Let's see if we can't improve on that in the near future...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6241
Differential Revision: D19290410
Pulled By: pdillinger
fbshipit-source-id: 25d44bf3a31de265502ed0c5d8a28cf4c7cb9c0b
Summary:
WritePreparedTxnDB calls CancelAllBackgroundWork in its destructor to avoid dangling references to it from background job's SnapshotChecker callback. However, if the DBImpl is already closed, the info log might be closed with it, which causes memory leak when CancelAllBackgroundWork tries to print to the info log. The patch fixes that by calling CancelAllBackgroundWork only if the db is not closed already.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6268
Differential Revision: D19303439
Pulled By: maysamyabandeh
fbshipit-source-id: 4228a6be7e78d43c90630347baa89b008200bd15
Summary:
This is a continuation of https://github.com/facebook/rocksdb/pull/5320/files
I open a new mr for these purposes, half a year has past since the old mr is posted so it's almost impossible to fulfill some points below on the old mr, especially 5)
1) add validation modes for optimistic txns
2) modify unittests to test both modes
3) make format
4) refine hash functor
5) push to master
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6240
Differential Revision: D19301296
fbshipit-source-id: 5b5b3cbd39558f43947f7d2dec6cd31a06386edb
Summary:
A new interface method Env::GetFreeSpace was added in https://github.com/facebook/rocksdb/issues/4164. It needs to be implemented for Windows port. Some error_handler_test cases fail on Windows because recovery cannot succeed without free space being reported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6265
Differential Revision: D19303065
fbshipit-source-id: 1f1a83e53f334284781cf61feabc996e87b945ca
Summary:
Currently, the recently-added test DBTest2.SwitchMemtableRaceWithNewManifest
fails in LITE mode since SetOptions() returns "Not supported". I do not want to
put `#ifndef ROCKSDB_LITE` because it reduces test coverage. Instead, just
trigger compaction on a different column family. The bg compaction thread
calling LogAndApply() may race with thread calling SwitchMemtable().
Test Plan (dev server):
make check
OPT=-DROCKSDB_LITE make check
or run DBTest2.SwitchMemtableRaceWithNewManifest 100 times.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6267
Differential Revision: D19301309
Pulled By: riversand963
fbshipit-source-id: 88cedcca2f985968ed3bb234d324ffa2aa04ca50
Summary:
Fix an error message when CURRENT is not found.
Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6264
Differential Revision: D19300699
Pulled By: riversand963
fbshipit-source-id: 303fa206386a125960ecca1dbdeff07422690caf
Summary:
Add oldest snapshot sequence property, so we can use `db.GetProperty("rocksdb.oldest-snapshot-sequence")` to get the sequence number of the oldest snapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6228
Differential Revision: D19264145
Pulled By: maysamyabandeh
fbshipit-source-id: 67fbe5304d89cbc475bd404e30d1299f7b11c010
Summary:
Reword the error message when keys are not added in strict ascending order.
Specifically, original error message is not clear when application tries to
call SstFileWriter::Merge() with duplicate keys.
Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6261
Differential Revision: D19290398
Pulled By: riversand963
fbshipit-source-id: 4dc30a701414e6894db2eb024e3734470c22b371
Summary:
It seems that the C-API doesn't expose the range delete functionality at the moment, so add the API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6259
Differential Revision: D19290320
Pulled By: pdillinger
fbshipit-source-id: 3f403a4c3446d2042d55f1ece7cdc9c040f40c27
Summary:
When measure_io_stats_ is enabled, the volume of logging is beyond the default limit of 512 size. The patch allows the EventLoggerStream to change the limit, and also sets it to 1024 for FlushJob.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6258
Differential Revision: D19279269
Pulled By: maysamyabandeh
fbshipit-source-id: 3fb5d468dad488f289ac99d713378177eb7504d6
Summary:
When called on transactions, MultiGet could return a legit MergeInProgress status. The patch excludes this case from errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6257
Differential Revision: D19275787
Pulled By: maysamyabandeh
fbshipit-source-id: f7158229422af015947e592ae066b4273c9fb9a4
Summary:
Stress tests count number of errors and report them at the end. Not all the cases are accompanied with a log line which makes debugging difficult. The patch adds a log line to the remaining cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6256
Differential Revision: D19268785
Pulled By: maysamyabandeh
fbshipit-source-id: bdabcaa5c5c7edcb4ce4f25e38fd8a3fd9c7700b
Summary:
allow_concurrent_memtable_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6254
Differential Revision: D19265819
Pulled By: maysamyabandeh
fbshipit-source-id: 47f2e2dc26fe0972c7152f4da15dadb9703f1179
Summary:
Clang analyzer was falsely reporting on use of txn=nullptr.
Added a new const variable so that it can properly prune impossible
control flows.
Also, 'make analyze' previously required setting USE_CLANG=1 as an
environment variable, not a make variable, or else compilation errors
like
g++: error: unrecognized command line option ‘-Wshorten-64-to-32’
Now USE_CLANG is not required for 'make analyze' (it's implied) and you
can do an incremental analysis (recompile what has changed) with
'USE_CLANG=1 make analyze_incremental'
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6244
Test Plan: 'make -j24 analyze', 'make crash_test'
Differential Revision: D19225950
Pulled By: pdillinger
fbshipit-source-id: 14f4039aa552228826a2de62b2671450e0fed3cb
Summary:
This commit is suspected in some crash test failures such as
Verification failed for column family 0 key 78438077: Value not found: NotFound:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6243
Test Plan: 'make check' and start 'make crash_test'
Differential Revision: D19220495
Pulled By: pdillinger
fbshipit-source-id: 6c4709cee80ab4344e06ce360f51e947d79fb3fa
Summary:
Call Transaction::MultiGet from TestMultiGet() in db_stress. We add some Puts/Merges/Deletes into the transaction in order to exercise MultiGetFromBatchAndDB. There is no data verification on read, just check status. There is currently no read data verification in db_stress as it requires synchronization with writes. It needs to be tackled separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6227
Test Plan: make crash_test_with_txn
Differential Revision: D19204611
Pulled By: anand1976
fbshipit-source-id: 770d0e30d002e88626c264c58103f1d709bb060c
Summary:
Recently db_stress starts to use a special Env that keeps all manifest files. This should not apply to checkpoint directory and causes test failure like this:
Verification failed: Checkpoint gave inconsistent state. Status is IO error: While mkdir: /dev/shm/rocksdb/rocksdb_crashtest_whitebox/.checkpoint27.tmp: File exists
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6233
Test Plan: Run crash_test with high chance of checkpoint and make sure it doesn't reproduce.
Differential Revision: D19207250
fbshipit-source-id: 12a931379e2e0572bb84aa658b6d03770c8551d4
Summary:
Listners are one source of bugs because we frequently release some mutex to invoke them, which introduce race conditions. Implement all callback functions in db_stress's listener class, and randomly sleep.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6197
Test Plan: Run crash_test for a while and see no obvious problem.
Differential Revision: D19134015
fbshipit-source-id: b9ea8be9366e4501759119520cd4f204943538f6
Summary:
db_stress to execute DB::GetApproximateSizes() with randomized keys and options. Return value is not validated but error will be reported.
Two ways to generate the range keys: (1) two random keys; (2) a small range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6213
Test Plan: (1) run "make crash_test" for a while; (2) hack the code to ingest some errors to see it is reported.
Differential Revision: D19204665
fbshipit-source-id: 652db36f13bcb5a3bd8fe4a10c0aa22a77a0bce2
Summary:
Currently, db_stress generates fixed length keys of 8 bytes. This patch adds the ability to generate variable length keys. Most of the db_stress code continues to work with a numeric key randomly generated, and the numeric key also acts as an index into the values_ array. The numeric key is mapped to a variable length string key in a deterministic way. Furthermore, the ordering is preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6165
Test Plan: run make crash_test
Differential Revision: D19204646
Pulled By: anand1976
fbshipit-source-id: d2d46a96615b4832a8be2a981f5913905f0e1ca7
Summary:
Several improvements to crash_test/stress_test:
(1) Stress_test to support an parameter of bottommost compression
(2) Rename those FLAGS_* variables that are not gflags to avoid confusion
(3) Crash_test to randomly generate compression type for bottommost compression with half the chance.
(4) Stress_test to sanitize unsupported compression type to snappy, so that crash_test to cover all possible compression types and people don't need to worry about they don't support all comrpession types in their environment.
(5) In crash_test, when generating db_stress command, sort arguments in alphabeta order, so that it is easier to find value for a specific argument.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6215
Test Plan: Run "make crash_test" for a while and see the botommost option shown in LOG files.
Differential Revision: D19171255
fbshipit-source-id: d7001e246c4ff9ee5760776eea0be97738650735
Summary:
1. Cover SeekToFirst() and SeekToLast().
2. Try to record the history of iterator operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6166
Test Plan: Do some manual changes in the code to cover the failure cases and see the error printing is correct and SeekToFirst() and SeekToLast() sometimes show up.
Differential Revision: D19047079
fbshipit-source-id: 1ed616f919fe4d32c0a021fc37932a7bd3063bcd
Summary:
There are no API changes ;-)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6218
Differential Revision: D19200373
Pulled By: pdillinger
fbshipit-source-id: 58d34b01ea53b75a1eccbd72f8b14d6256a7380f
Summary:
Add the verification in operateDB to verify GetLiveFiles, GetSortedWalFiles and GetCurrentWalFile. The test will be called every 1 out of N, N is decided by get_live_files_and_wal_files_one_i, whose default is 1000000.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6224
Test Plan: pass db_stress default run.
Differential Revision: D19183358
Pulled By: zhichao-cao
fbshipit-source-id: 20073cf72ede77a3e0d3cf5f28304f1f605d2b1a
Summary:
As title. We can run non-cf-consistency stress tests with verify_db_one_in>0,
thus remove the check added previously.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6231
Test Plan:
```
make crash_test
```
Differential Revision: D19198295
Pulled By: riversand963
fbshipit-source-id: e874c701bb03ab76eaab00f059dd4032bb2f537f
Summary:
The patch adds support for BlobDB to `db_stress`. Note that BlobDB currently does
not support (amongst other features) Column Families or the `SingleDelete` API,
so for now, those should be disabled on the command line when running `db_stress` in
BlobDB mode (using `-column_families=1` and `-nooverwritepercent=0`,
respectively). Also, some BlobDB features that do not go well with the verification logic
in `db_stress` like TTL and FIFO eviction are not supported currently.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6230
Test Plan:
```
./db_stress -max_key=100000 -use_blob_db -column_families=1 -nooverwritepercent=0 -reopen=1 -blob_db_file_size=1000000 -target_file_size_base=1000000 -blob_db_enable_gc -blob_db_gc_cutoff=0.1 -blob_db_min_blob_size=10 -blob_db_bytes_per_sync=16384
```
Differential Revision: D19191476
Pulled By: ltamasi
fbshipit-source-id: 35840452af8c5e6095249c7fd9a53a119a0985fc
Summary:
Currently, db_stress performs verification by calling `VerifyDb()` at the end of test and optionally before tests start. In case of corruption or incorrect result, it will be too late. This PR adds more verification in two ways.
1. For cf consistency test, each test thread takes a snapshot and verifies every N ops. N is configurable via `-verify_db_one_in`. This option is not supported in other stress tests.
2. For cf consistency test, we use another background thread in which a secondary instance periodically tails the primary (interval is configurable). We verify the secondary. Once an error is detected, we terminate the test and report. This does not affect other stress tests.
Test plan (devserver)
```
$./db_stress -test_cf_consistency -verify_db_one_in=0 -ops_per_thread=100000 -continuous_verification_interval=100
$./db_stress -test_cf_consistency -verify_db_one_in=1000 -ops_per_thread=10000 -continuous_verification_interval=0
$make crash_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6173
Differential Revision: D19047367
Pulled By: riversand963
fbshipit-source-id: aeed584ad71f9310c111445f34975e5ab47a0615
Summary:
BlobDB currently only supports using the default column family. The earlier
code enforces this by comparing the `ColumnFamilyHandle` passed to the
`Get`/`Put`/etc. call with the handle returned by `DefaultColumnFamily`
(which, at the end of the day, comes from `DBImpl::default_cf_handle_`).
Since other `ColumnFamilyHandle`s can also point to the default column
family, this can reject legitimate requests as well. (As an example,
with the earlier code, the handle returned by `BlobDB::Open` cannot
actually be used in API calls.) The patch fixes this by comparing only
the IDs of the column family handles instead of the pointers themselves.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6226
Test Plan: `make check`
Differential Revision: D19187461
Pulled By: ltamasi
fbshipit-source-id: 54ce2e12ebb1f07e6d1e70e3b1e0213dfa94bda2
Summary:
The new Python syntax check could fail if external entities
were cloned or symlinked to a subdir in a rocksdb git clone. (E.g.
Facebook internal LITE build.) Only look for Python files in specific
subdirs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6225
Test Plan: python tools/check_all_python.py (still 34 files checked)
Reviewed By: gfosco
Differential Revision: D19186110
Pulled By: pdillinger
fbshipit-source-id: 1fefa54e36b32cd5d96d3d1a43e8a2a694c22ea5
Summary:
Right now BlockBasedTable::ApproximateSize() uses default setting about whether to use total order seek. There is no reason for that. There is no reason to do any filtering for approximate size boundary key, and it may introduce bugs. Disable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6222
Test Plan: Run existing tests
Differential Revision: D19184787
fbshipit-source-id: 64180660bd2800914fff75104172b61c06f0b1c9
Summary:
Complete some refactoring called for in https://github.com/facebook/rocksdb/issues/6148. Somehow I got some 'make format' in here for files I didn't change, but that should be OK. (I'm not sure why "hide whitespace changes" doesn't seem to help in review.)
Not addressed in this PR: some operations simply print to stdout rather than failing on discovering a bad status or inconsistency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6195
Differential Revision: D19131067
Pulled By: pdillinger
fbshipit-source-id: 4f416e6b792023989ef119f385fe122426cb825d
Summary:
This reverts commit 54f9092b0c.
It making our daily stress tests fail. Revert it until the issues are fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6220
Differential Revision: D19179881
Pulled By: maysamyabandeh
fbshipit-source-id: 99de0eaf776567fa81110b9ad2608234a16083ce
Summary:
We're seeing assertion violations like this in crash test:
db_stress: table/block_based/block_based_table_reader.cc:4129: virtual uint64_t rocksdb::BlockBasedTable::ApproximateSize(const rocksdb::Slice&, const rocksdb::Slice&, rocksdb::TableReaderCaller): Assertion `end_offset >= start_offset' failed.***
And ApproximateSize appears only to be called with the level_compaction_dynamic_level_bytes option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6217
Test Plan:
temporarily put an assert(false) in ApproximateSize and
briefly run 'make crash_test'
Differential Revision: D19179174
Pulled By: pdillinger
fbshipit-source-id: 506e6549aea0da19b363a1a6da04373c364d92e4
Summary:
Adds a python script to syntax check all python files in the
repository and report any errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6209
Test Plan:
'make check' with and without seeded syntax errors. Also look
for "No syntax errors in 34 .py files" on success, and in java_test CI output
Differential Revision: D19166756
Pulled By: pdillinger
fbshipit-source-id: 537df464b767260d66810b4cf4c9808a026c58a4
Summary:
Beside extending index_type to kHashSearch, it clarifies in the code base that this feature is incompatible with index_block_restart_interval > 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6210
Test Plan:
```
make -j32 crash_test
Differential Revision: D19166567
Pulled By: maysamyabandeh
fbshipit-source-id: 3aaf75a70a8b462d372d43aac69dbd10df303ec7
Summary:
The patch makes it possible to set the BlobDB configuration option
`garbage_collection_cutoff` on the command line. In addition, it changes
the `db_bench` code so that the default values of BlobDB related
parameters are taken from the defaults of the actual BlobDB
configuration options (note: this changes the the default of
`blob_db_bytes_per_sync`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6211
Test Plan: Ran `db_bench` with various values of the new parameter.
Differential Revision: D19166895
Pulled By: ltamasi
fbshipit-source-id: 305ccdf0123b9db032b744715810babdc3e3b7d5
Summary:
level passed into ColumnFamilyData::CalculateSSTWriteHint() can be smaller than base_level in current version, which would cause overflow.
We see ubsan complains:
db/compaction/compaction_job.cc:1511:39: runtime error: load of value 4294967295, which is not a valid value for type 'Env::WriteLifeTimeHint'
and I hope this commit fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6212
Test Plan: Run existing tests and see them to pass.
Differential Revision: D19168442
fbshipit-source-id: bf8fd86f85478ecfa7556db46dc3242de8c83dc9
Summary:
Should fix Travis build error that randomly showed up upon
using Java 13 version of javadoc.
AdvancedColumnFamilyOptionsInterface.java:257: error:
unexpected heading used: <H2>, compared to implicit preceding heading: <H3>
According to this reference https://bugs.openjdk.java.net/browse/JDK-8220379
it should work to start at h4, but that didn't work, so avoiding
headings should be fine.
Also fix Java EnvironmentTest for JDK13.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6208
Test Plan: Travis run on PR (don't have Java 13 handy)
Differential Revision: D19163105
Pulled By: pdillinger
fbshipit-source-id: 4a9419cbe7ef780fba771b8a1508e1ea80d17b3e
Summary:
Right now, sometimes file prefetching is still on when mmap is enabled. This causes bug of reading wrong data. In this commit, we remove all those possible paths.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6206
Test Plan: make crash_test with compaction_readahead_size, which used to fail. RUn all existing tests.
Differential Revision: D19149429
fbshipit-source-id: 9e18ea8c566e416aac9647bdd05afe596634791b
Summary:
buf_offset does not need to get the value from req.len for othe final block. It can cause test fail for clan_analyze. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6204
Test Plan: pass make asan_check
Differential Revision: D19145335
Pulled By: zhichao-cao
fbshipit-source-id: 8f6e74565746381b5c5ef598b97d746517b36e5b
Summary:
Add an option to db_stress, verify_checksum_one_in, to call DB::VerifyChecksum() once every N ops.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6203
Differential Revision: D19145753
Pulled By: anand1976
fbshipit-source-id: d09edf21f309ad53aa40dd25b7a563d50665fd8b
Summary:
The bad code was:
```
mutex.Lock(); // `mutex` protects `container`
for (auto& x : container) {
mutex.Unlock();
// do stuff to x
mutex.Lock();
}
```
It's incorrect because both `x` and the iterator may become invalid if another thread modifies the container while this thread is not holding the mutex.
Broken by https://github.com/facebook/rocksdb/pull/5796 - it replaced a `while (!container.empty())` loop with a `for (auto x : container)`.
(RocksDB code does a lot of such unlocking+re-locking of mutexes, and this type of bugs comes up a lot :/ )
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6193
Test Plan: Ran some logdevice integration tests that were crashing without this fix.
Differential Revision: D19116874
Pulled By: al13n321
fbshipit-source-id: 9672bc4227c1b68f46f7436db2b96811adb8c703
Summary:
Fix two crash test issues:
1. sync mode should not run with disable_wal=true
2. disable "compaction_readahead_size" for now. With it on, some block checksum verification failure will happen in compaction paths. Not sure why, but disable it for now to keep the test clean.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6200
Test Plan: Run "make crash_test" and "make crash_test_with_atomic_flush" and see it runs way longer than before the fix without failing.
Differential Revision: D19143493
fbshipit-source-id: 438fad52fbda60aafd142e1b65578addbe7d72b1
Summary:
Cuts about 30-60 seconds to from each Travis Linux build, and about 15 minutes from each macOS build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6181
Differential Revision: D19098357
Pulled By: pdillinger
fbshipit-source-id: 863dd1ab09076ad9b03c2b7914908359628315ae
Summary:
I found that CleanupSuperVersion() may block Get() for 30ms+ （per MemTable is 256MB）.
Then I found "delete sv" in ~SuperVersion() takes the time.
The backtrace looks like this
DBImpl::GetImpl() -> DBImpl::ReturnAndCleanupSuperVersion() ->
DBImpl::CleanupSuperVersion() : delete sv; -> ~SuperVersion()
I think it's better to delete in a background thread, please review it。
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6146
Differential Revision: D18972066
fbshipit-source-id: 0f7b0b70b9bb1e27ad6fc1c8a408fbbf237ae08c
Summary:
With https://github.com/facebook/rocksdb/pull/6121, errors returned by `PrepareBlobValue`
result in `CompactionIterator::status_` being set to `Corruption` or `IOError`
as appropriate, however, `valid_` is not set to `false`. The error is eventually propagated in
`CompactionJob::ProcessKeyValueCompaction` but only after the main loop completes.
Setting `valid_` to `false` upon errors enables us to terminate the loop early and fail the
compaction sooner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6170
Test Plan:
Ran `make check` and used `db_bench` in BlobDB mode.
fbshipit-source-id: a2ca88a3ca71115e2605bd34a4c795d8a28bef27
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6192
Test Plan:
Add a unit test that fails without the fix and passes now
make check
Differential Revision: D19124781
Pulled By: anand1976
fbshipit-source-id: 8c8cb6fa16c3fc23ec011e168561a13f76bbd783
Summary:
As title. Previous assumption was that the underlying lib can always return
a shared_ptr<Env>. This is too strong. Therefore, we use Env::LoadEnv to relax
it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6196
Test Plan: make check
Differential Revision: D19133199
Pulled By: riversand963
fbshipit-source-id: c83a0c02a42610d077054f2de1acfc45126b3a75
Summary:
In https://github.com/facebook/rocksdb/issues/6174 we fixed the stress test to respect the CancelAllBackgroundWork + Close order for WritePrepared transactions. The fix missed to take into account that some invocation of CancelAllBackgroundWork are with wait=false parameter which essentially breaks the order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6191
Differential Revision: D19102709
Pulled By: maysamyabandeh
fbshipit-source-id: f4e7b5fdae47ff1c1ac284ba1cf67d5d3f3d03eb
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
Summary:
Several options are trivially added to crash test and random values are picked.
Made simple test run non-dynamic level and normal test run dynamic level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6176
Test Plan: Run crash_test and watch the printing
Differential Revision: D19053955
fbshipit-source-id: 958cb43c968541ebd87ed4d91e778bd1d40e7502
Summary:
compaction history is stored in manifest files. Preserve all of them in db_stress would help debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6142
Test Plan: Run db_stress and observe that manifest files are preserved. Run whole crash_test and see how DB directory looks like.
Differential Revision: D19047026
fbshipit-source-id: f83c3e0bb5332b1b4768be5dcee56a24f9b760a9
Summary:
In the current db_stress, all the keys are generated randomly and follows the uniform distribution. In order to test some corner cases that some key are always updated or read, we need to generate the key based on other distributions. In this PR, the key is generated based on Zipfian distribution and the skewness can be controlled by setting hot_key_alpha (0.8 to 1.5 is suggested). The larger hot_key_alpha is, the more skewed will be. Not that, usually, if hot_key_alpha is larger than 2, there might be only 1 or 2 keys that are generated. If hot_key_alpha is 0, it generate the key follows uniform distribution (random key)
Testing plan: pass the db_stress and printed the keys to make sure it follows the distribution.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6163
Differential Revision: D18978480
Pulled By: zhichao-cao
fbshipit-source-id: e123b4865477f7478e83fb581f9576bada334680
Summary:
https://github.com/facebook/rocksdb/pull/6177 introduced a data race
involving `MemTableList::InstallNewVersion` and `MemTableList::NumFlushed`.
The patch fixes this by caching whether the current version has any
memtable history (i.e. flushed memtables that are kept around for
transaction conflict checking) in an `std::atomic<bool>` member called
`current_has_history_`, similarly to how `current_memory_usage_excluding_last_`
is handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6187
Test Plan:
```
make clean
COMPILE_WITH_TSAN=1 make db_test -j24
./db_test
```
Differential Revision: D19084059
Pulled By: ltamasi
fbshipit-source-id: 327a5af9700fb7102baea2cc8903c085f69543b9
Summary:
The filter bits builder collects all the hashes to add in memory before adding them (because the number of keys is not known until we've walked over all the keys). Existing code uses a std::vector for this, which can mean up to 2x than necessary space allocated (and not freed) and up to ~2x write amplification in memory. Using std::deque uses close to minimal space (for large filters, the only time it matters), no write amplification, frees memory while building, and no need for large contiguous memory area. The only cost is more calls to allocator, which does not appear to matter, at least in benchmark test.
For now, this change only applies to the new (format_version=5) Bloom filter implementation, to ease before-and-after comparison downstream.
Temporary memory use during build is about the only way the new Bloom filter could regress vs. the old (because of upgrade to 64-bit hash) and that should only matter for full filters. This change should largely mitigate that potential regression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6175
Test Plan:
Using filter_bench with -new_builder option and 6M keys per filter is like large full filter (improvement). 10k keys and no -new_builder is like partitioned filters (about the same). (Corresponding configurations run simultaneously on devserver.)
std::vector impl (before)
$ /usr/bin/time -v ./filter_bench -impl=2 -quick -new_builder -working_mem_size_mb=1000 -
average_keys_per_filter=6000000
Build avg ns/key: 52.2027
Maximum resident set size (kbytes): 1105016
$ /usr/bin/time -v ./filter_bench -impl=2 -quick -working_mem_size_mb=1000 -
average_keys_per_filter=10000
Build avg ns/key: 30.5694
Maximum resident set size (kbytes): 1208152
std::deque impl (after)
$ /usr/bin/time -v ./filter_bench -impl=2 -quick -new_builder -working_mem_size_mb=1000 -
average_keys_per_filter=6000000
Build avg ns/key: 39.0697
Maximum resident set size (kbytes): 1087196
$ /usr/bin/time -v ./filter_bench -impl=2 -quick -working_mem_size_mb=1000 -
average_keys_per_filter=10000
Build avg ns/key: 30.9348
Maximum resident set size (kbytes): 1207980
Differential Revision: D19053431
Pulled By: pdillinger
fbshipit-source-id: 2888e748723a19d9ea40403934f13cbb8483430c
Summary:
Current implementation holds on to 10% of snapshots for 10x longer, and 1% of snapshots 100x longer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6171
Test Plan:
```
make -j32 crash_test
Differential Revision: D19038399
Pulled By: maysamyabandeh
fbshipit-source-id: 75da2dbb5c47a0b3f37d299b8719e392b73b42c0
Summary:
We have observed an increase in CPU load caused by frequent calls to
`ColumnFamilyData::InstallSuperVersion` from `DBImpl::TrimMemtableHistory`
when using `max_write_buffer_size_to_maintain` to limit the amount of
memtable history maintained for transaction conflict checking. Part of the issue
is that trimming can potentially be scheduled even if there is no memtable
history. The patch adds a check that fixes this.
See also https://github.com/facebook/rocksdb/pull/6169.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6177
Test Plan:
Compared `perf` output for
```
./db_bench -benchmarks=randomtransaction -optimistic_transaction_db=1 -statistics -stats_interval_seconds=1 -duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000 --transaction_set_snapshot=1 --threads=32
```
before and after the change. There is a significant reduction for the call chain
`rocksdb::DBImpl::TrimMemtableHistory` -> `rocksdb::ColumnFamilyData::InstallSuperVersion` ->
`rocksdb::ThreadLocalPtr::StaticMeta::Scrape` even without https://github.com/facebook/rocksdb/pull/6169.
Differential Revision: D19057445
Pulled By: ltamasi
fbshipit-source-id: dff81882d7b280e17eda7d9b072a2d4882c50f79
Summary:
Close asserts that there is no unreleased snapshots. For WritePrepared transaction, this means that the background work that holds on a snapshot must be canceled first. Update the stress tests to respect the sequence.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6174
Test Plan:
```
make -j32 crash_test
Differential Revision: D19057322
Pulled By: maysamyabandeh
fbshipit-source-id: c9e9e24f779bbfb0ab72c2717e34576c01bc6362
Summary:
Periodic compactions ensure that even SSTs that do not get picked up
otherwise eventually go through compaction; used in conjunction with
BlobDB's garbage collection, they enable BlobDB to reclaim space when
old blob files are used by such straggling SSTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6172
Test Plan: Ran `make check` and used the BlobDB mode of `db_bench`.
Differential Revision: D19045045
Pulled By: ltamasi
fbshipit-source-id: 04636ecc4b6cfe8d495bf656faa65d54a5eb1a93
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
And clean up related code, especially in stress test.
(More clean up of db_stress_test_base.cc coming after this.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6154
Test Plan: make check, make blackbox_crash_test for a bit
Differential Revision: D18938180
Pulled By: pdillinger
fbshipit-source-id: 524d27621b8dbb25f6dff40f1081e7c00630357e
Summary:
We have observed an increase in CPU load caused by frequent calls to
`ColumnFamilyData::InstallSuperVersion` from `DBImpl::TrimMemtableHistory`
when using `max_write_buffer_size_to_maintain` to limit the amount of
memtable history maintained for transaction conflict checking. As it turns out,
this is caused by the code creating and installing a new `SuperVersion` even if
no memtables were actually trimmed. The patch adds a check to avoid this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6169
Test Plan:
Compared `perf` output for
```
./db_bench -benchmarks=randomtransaction -optimistic_transaction_db=1 -statistics -stats_interval_seconds=1 -duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000 --transaction_set_snapshot=1 --threads=32
```
before and after the change. With the fix, the call chain `rocksdb::DBImpl::TrimMemtableHistory` ->
`rocksdb::ColumnFamilyData::InstallSuperVersion` -> `rocksdb::ThreadLocalPtr::StaticMeta::Scrape`
no longer registers in the `perf` report.
Differential Revision: D19031509
Pulled By: ltamasi
fbshipit-source-id: 02686fce594e5b50eba0710e4b28a9b808c8aa20
Summary:
With WritePrepared transactions configured with two_write_queues, unordered_write will offer the same guarantees as vanilla rocksdb and thus can be enabled in stress tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6164
Test Plan:
```
make -j32 crash_test_with_txn
Differential Revision: D18991899
Pulled By: maysamyabandeh
fbshipit-source-id: eece5e96b4169b67d7931e5c0afca88540a113e1
Summary:
The patch adds logic that relocates live blobs from the oldest N non-TTL
blob files as they are encountered during compaction (assuming the BlobDB
configuration option `enable_garbage_collection` is `true`), where N is defined
as the number of immutable non-TTL blob files multiplied by the value of
a new BlobDB configuration option called `garbage_collection_cutoff`.
(The default value of this parameter is 0.25, that is, by default the valid blobs
residing in the oldest 25% of immutable non-TTL blob files are relocated.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6121
Test Plan: Added unit test and tested using the BlobDB mode of `db_bench`.
Differential Revision: D18785357
Pulled By: ltamasi
fbshipit-source-id: 8c21c512a18fba777ec28765c88682bb1a5e694e
Summary:
It's easy to cause coredump when closing ColumnFamilyHandle with unreleased iterators, especially iterators release is controlled by java GC when using JNI.
This patch fixed concurrent CF iteration and drop, we let iterators(actually SuperVersion) hold a ColumnFamilyData reference to prevent the CF from being released too early.
fixed https://github.com/facebook/rocksdb/issues/5982
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6147
Differential Revision: D18926378
fbshipit-source-id: 1dff6d068c603d012b81446812368bfee95a5e15
Summary:
Read keys from a snapshot that a range deletion were added after the snapshot was created and this range deletion was inside an immutable memtable, we will get wrong key set.
More detail rest in codes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6062
Differential Revision: D18966785
Pulled By: pdillinger
fbshipit-source-id: 38a60bb1e2d0a1dbfc8ec641617200b6a02b86c3
Summary:
**Summary:**
This PR fixes two unordered_write related issues:
- ingestion job may skip the necessary memtable flush https://github.com/facebook/rocksdb/issues/6026
- compact range may cause memtable is flushed before pending unordered write finished
1. `CompactRange` triggers memtable flush but doesn't wait for pending-writes
2. there are some pending writes but memtable is already flushed
3. the memtable related WAL is removed( note that the pending-writes were recorded in that WAL).
4. pending-writes write to newer created memtable
5. there is a restart
6. missing the previous pending-writes because WAL is removed but they aren't included in SST.
**How to solve:**
- Wait pending memtable writes before ingestion job check memtable key range
- Wait pending memtable writes before flush memtable.
**Note that: `CompactRange` calls `RangesOverlapWithMemtables` too without waiting for pending waits, but I'm not sure whether it affects the correctness.**
**Test Plan:**
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6113
Differential Revision: D18895674
Pulled By: maysamyabandeh
fbshipit-source-id: da22b4476fc7e06c176020e7cc171eb78189ecaf
Summary:
While the instruction of installing "make format" dependencies works on some platforms, it is hard to use for some others. Improve it a little bit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6162
Test Plan: Run "make format" on an envrionment missing the dependencies and see the instructions printed out
Differential Revision: D18970773
fbshipit-source-id: fd21b31053407cc171a6675f781a556a1c3e8945
Summary:
This change fixes a source issue that caused compile time error which breaks build for many fbcode services in that setup. The size() member function of channel is a const member, so member variables accessed within it are implicitly const as well. This caused error when clang fails to resolve to a constructor that takes std::mutex because the suitable constructor got rejected due to loss of constness for its argument. The fix is to add mutable modifier to the lock_ member of channel.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6161
Differential Revision: D18967685
Pulled By: maysamyabandeh
fbshipit-source-id: 698b6a5153c3c92eeacb842c467aa28cc350d432
Summary:
Currently the default txn write policy in crash tests is WRITE_PREPARED. The patch randomly picks the write policy at the start of the crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6158
Test Plan:
```
make -j32 crash_test_with_txn
```
Differential Revision: D18946307
Pulled By: maysamyabandeh
fbshipit-source-id: f77d7a94f99a08791ef9626da153d284bf521950
Summary:
This test was recently updated but failed to account for Bloom
schema variance by CACHE_LINE_SIZE. (Since CACHE_LINE_SIZE is not
defined in our C code, the test now simply allows a valid result for any
CACHE_LINE_SIZE, not just the current one.)
Unblock https://github.com/facebook/rocksdb/issues/5932
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6153
Test Plan:
ran unit test with builds TEST_CACHE_LINE_SIZE=128, =256, and
unset (64 on Intel)
Differential Revision: D18936015
Pulled By: pdillinger
fbshipit-source-id: e5e3852f95283d34d624632c1ae8d3adb2f2662c
Summary:
`low_pri_write_rate_limiter_` is not being used. Removing. `WriteController` has an internal low_pri rate limiter which is the real rate limiter for low-pri writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6068
Test Plan: make
Differential Revision: D18664120
fbshipit-source-id: dfe3e4de033cf3522b67781b383aad7d0936034c
Summary:
Adds example to show the difference of reading from snapshot and from the latest state.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6059
Test Plan: cd examples && make transaction_example && ./transaction_example
Differential Revision: D18797616
fbshipit-source-id: f17a2cb12187092ea243159e6ccf55790859e0c0
Summary:
Add SyncWAL to db_stress. Specify with `-sync_wal_one_in=N` so that it will be
called once every N operations on average.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6149
Test Plan:
```
$make db_stress
$./db_stress -sync_wal_one_in=100 -ops_per_thread=100000
```
Differential Revision: D18922529
Pulled By: riversand963
fbshipit-source-id: 4c0b8cb8fa21852722cffd957deddf688f12ea56
Summary:
CancelAllBackgroundWork() and Close() are frequently used features but we don't cover it in stress test. Simply execute them before closing the DB with 1/2 chance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6141
Test Plan: Run "db_stress".
Differential Revision: D18900861
fbshipit-source-id: 49b46ccfae120d0f9de3e0543b82fb6d715949d0
Summary:
This is required to compile on Windows with Visual Studio 2015, which is used for creating the RocksJava releases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5446
Differential Revision: D18924811
fbshipit-source-id: a183a62e79a2af5aaf59cd08235458a172fe7dcb
Summary:
Add an option to explicitly disable building shared versions of the
RocksDB libraries. The shared libraries cannot be built in cases where
some dependencies are only available as static libraries. This allows
still building RocksDB in these situations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6122
Differential Revision: D18920740
fbshipit-source-id: d24f66d93c68a1e65635e6e0b663bae62c903bca
Summary:
Right now, in db_stress, compact range is simply executed without any immediate data validation. Add a simply validation which compares hash for all keys within the compact range to stay the same against the same snapshot before and after the compaction.
Also, randomly tune most knobs of CompactRangeOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6140
Test Plan: Run db_stress with "--compact_range_one_in=2000 --compact_range_width=100000000" for a while. Manually ingest some hacky code and observe the error path.
Differential Revision: D18900230
fbshipit-source-id: d96e75bc8c38dd5ec702571ffe7cf5f4ea93ee10
Summary:
Error message when running `make` on Mac OS with master branch (v6.6.0):
```
$ make
$DEBUG_LEVEL is 1
Makefile:168: Warning: Compiling in debug mode. Don't use the resulting binary in production
third-party/folly/folly/synchronization/WaitOptions.cpp:6:10: fatal error: 'folly/synchronization/WaitOptions.h' file not found
#include <folly/synchronization/WaitOptions.h>
^
1 error generated.
third-party/folly/folly/synchronization/ParkingLot.cpp:6:10: fatal error: 'folly/synchronization/ParkingLot.h' file not found
#include <folly/synchronization/ParkingLot.h>
^
1 error generated.
third-party/folly/folly/synchronization/DistributedMutex.cpp:6:10: fatal error: 'folly/synchronization/DistributedMutex.h' file not found
#include <folly/synchronization/DistributedMutex.h>
^
1 error generated.
third-party/folly/folly/synchronization/AtomicNotification.cpp:6:10: fatal error: 'folly/synchronization/AtomicNotification.h' file not found
#include <folly/synchronization/AtomicNotification.h>
^
1 error generated.
third-party/folly/folly/detail/Futex.cpp:6:10: fatal error: 'folly/detail/Futex.h' file not found
#include <folly/detail/Futex.h>
^
1 error generated.
GEN util/build_version.cc
$DEBUG_LEVEL is 1
Makefile:168: Warning: Compiling in debug mode. Don't use the resulting binary in production
third-party/folly/folly/synchronization/WaitOptions.cpp:6:10: fatal error: 'folly/synchronization/WaitOptions.h' file not found
#include <folly/synchronization/WaitOptions.h>
^
1 error generated.
third-party/folly/folly/synchronization/ParkingLot.cpp:6:10: fatal error: 'folly/synchronization/ParkingLot.h' file not found
#include <folly/synchronization/ParkingLot.h>
^
1 error generated.
third-party/folly/folly/synchronization/DistributedMutex.cpp:6:10: fatal error: 'folly/synchronization/DistributedMutex.h' file not found
#include <folly/synchronization/DistributedMutex.h>
^
1 error generated.
third-party/folly/folly/synchronization/AtomicNotification.cpp:6:10: fatal error: 'folly/synchronization/AtomicNotification.h' file not found
#include <folly/synchronization/AtomicNotification.h>
^
1 error generated.
third-party/folly/folly/detail/Futex.cpp:6:10: fatal error: 'folly/detail/Futex.h' file not found
#include <folly/detail/Futex.h>
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6145
Differential Revision: D18910812
fbshipit-source-id: 5a4475466c2d0601657831a0b48d34316b2f0816
Summary:
Especially with non-integral bits/key now supported,
db_crashtest should vary the bloom_bits configuration. The probabilities
look like this:
1/2 chance of a uniform int from 0 to 19. This includes overall 1/40
chance of 0 which disables the bloom filter.
1/2 chance of a float from a lognormal distribution with a median of 10.
This always produces positive values but with a decent chance of < 1
(overall ~1/40) or > 100 (overall ~1/40), the enforced/coerced
implementation limits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6103
Test Plan:
start 'make blackbox_crash_test' several times and look at
configuration output
Differential Revision: D18734877
Pulled By: pdillinger
fbshipit-source-id: 4a38cb057d3b3fc1327f93199f65b9a9ffbd7316
Summary:
Formatter somehow complains some recent lines changed. Apply them to make the formatter happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6138
Test Plan: See CI passes.
Differential Revision: D18895950
fbshipit-source-id: 7d1696cf3e3a682bc10a30cdca748a23c6565255
Summary:
Two changes:
1. Prevent static variables in a header file
2. Add "override" keyword when virtual functions are overridden.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6137
Test Plan: Build db_stress with or without LITE.
Differential Revision: D18892007
fbshipit-source-id: 295356427a34473b23ed36d6ed4ef3ae35a32db0
Summary:
Add overrides needed in FilterPolicy wrapper to fix
rocksdb_filterpolicy_create_bloom_full (see issue https://github.com/facebook/rocksdb/issues/6129). Re-enabled
assertion in BloomFilterPolicy::CreateFilter that was being violated.
Expanded c_test to identify Bloom filter implementations by FP counts.
(Without the fix, updated test will trigger assertion and fail otherwise
without the assertion.)
Fixes https://github.com/facebook/rocksdb/issues/6129
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6132
Test Plan: updated c_test, also run under valgrind.
Differential Revision: D18864911
Pulled By: pdillinger
fbshipit-source-id: 08e81d7b5368b08e501cd402ef5583f2650c19fa
Summary:
thread_local_test now fails because it asserts no thread local instance is created when the test started. However, right now a thread local instance might be created when creating PosixEnv as a static variable. Fix the test by relaxing the assumption of starting from 0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6136
Test Plan: Find an environment where the test fails, and see it passes with the fix applied.
Differential Revision: D18889224
fbshipit-source-id: 7946f3bfea81d236f7bb1554076696705b211b92
Summary:
BlockBasedTableBuilder uses ExtractUserKey in EnterUnbuffered. This would
cause index filter building error, since user-provided timestamp is supported
by ExtractUserKeyAndStripTimestamp, and it's used in Add. This commit changes
ExtractUserKey to ExtractUserKeyAndStripTimestamp.
A test case is also added by modifying DBBasicTestWithTimestampWithParam_
PutAndGet test in db_basic_test to cover ExtractUserKeyAndStripTimestamp usage
in both kBuffered and kUnbuffered state of BlockBasedTableBuilder.
Before the ExtractUserKeyAndStripTimstamp fix:
```
$ ./db_basic_test --gtest_filter="*PutAndGet*"
Note: Google Test filter = *PutAndGet*
[==========] Running 2 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam
[ RUN ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
[ FAILED ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0, where GetParam() = false (1177 ms)
[ RUN ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1
[ OK ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1 (1056 ms)
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam (2233 ms total)
[----------] Global test environment tear-down
[==========] 2 tests from 1 test case ran. (2233 ms total)
[ PASSED ] 1 test.
[ FAILED ] 1 test, listed below:
[ FAILED ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0, where GetParam() = false
1 FAILED TEST
```
After the ExtractUserKeyAndStripTimstamp fix:
```
$ ./db_basic_test --gtest_filter="*PutAndGet*"
Note: Google Test filter = *PutAndGet*
[==========] Running 2 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam
[ RUN ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0
[ OK ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0 (1417 ms)
[ RUN ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1
[ OK ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1 (1041 ms)
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam (2458 ms total)
[----------] Global test environment tear-down
[==========] 2 tests from 1 test case ran. (2458 ms total)
[ PASSED ] 2 tests.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6100
Differential Revision: D18769654
Pulled By: riversand963
fbshipit-source-id: 76c2cf2c9a5e0d85db95d98e812e6af0c2a15c6b
Summary:
ASAN reports:
internal_repo_rocksdb/repo:db_test - MultiThreaded/MultiThreadedDBTest.MultiThreaded/43: fatal
==2692739==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6130000500ca at pc 0x0000006be780 bp 0x7efef85ccd20 sp 0x7efef85cc4d0
[CONTEXT] === How to use this, how to get the raw stack trace, and more: fburl.com/ASAN ===
[CONTEXT] READ of size 331 at 0x6130000500ca thread T195
[CONTEXT] #0 db_test_bin+0x6be77f __interceptor_strlen.part.35
[CONTEXT] https://github.com/facebook/rocksdb/issues/1 internal_repo_rocksdb/repo/include/rocksdb/slice.h:55 rocksdb::Slice::Slice(char const*)
[CONTEXT] https://github.com/facebook/rocksdb/issues/2 internal_repo_rocksdb/repo/env/io_posix.cc:522 rocksdb::PosixRandomAccessFile::MultiRead(rocksdb::ReadRequest*, unsigned long)
I looked at env/io_posix.cc:522 but don't see a reason why the line needs to be there at all, because it is not used before overwritten. So it must be a line that is put there as a bug. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6135
Test Plan: Rerun the same test which passes after the fix. Run all the tests and make sure they all pass.
Differential Revision: D18880251
fbshipit-source-id: 3b84ac6a05b67b529c4202e0ceb4c047460f44f2
Summary:
Test DBTestUniversalCompaction.RecalculateScoreAfterPicking was
flaky on ARM, so it now uses SpecialSkipListFactory (like other tests)
for predictable memtable flushes.
Fixes https://github.com/facebook/rocksdb/issues/5736
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6125
Test Plan:
while ./db_universal_compaction_test; do :; done # for a
while on ARM and on Intel (both Linux)
Differential Revision: D18864821
Pulled By: pdillinger
fbshipit-source-id: 2f3ca0ea66ce420dcd6d41b0ec12377112a5a79f
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
Summary:
Isolate `db_bench` from building tests, out of respect for the related comments.
Let building tests yields to `WITH_TEST=ON` AND `CMAKE_BUILD_TYPE=Debug` both,
and building `db_bench` yields to `WITH_BENCHMARK_TOOLS=ON`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6098
Test Plan: cmake -DCMAKE_BUILD_TYPE=Debug/Release -DWITH_TESTS=ON/OFF -DWITH_BENCHMARK_TOOLS=ON/OFF -DWITH_TOOLS=ON/OFF && make
Differential Revision: D18856891
Pulled By: riversand963
fbshipit-source-id: addbee8ad6abefb877843a313b4630cfab3ce4f0
Summary:
Right now, PosixRandomAccessFile::MultiRead() executes read requests in parallel. In this PR, it leverages I/O Uring library to run it in parallel, even when page cache is enabled. This function will fall back if the kernel version doesn't support it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5881
Test Plan: Run the unit test on a kernel version supporting it and make sure all tests pass, and run a unit test on kernel version supporting it and see it pass. Before merging, will also run stress test and see it passes.
Differential Revision: D17742266
fbshipit-source-id: e05699c925ac04fdb42379456a4e23e4ebcb803a
Summary:
A longstanding bug in our C interface can trigger this
assertion; see issue https://github.com/facebook/rocksdb/issues/6129. Disabling the assertion for now
(for 6.6.0) and will re-enable on fix of that bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6128
Differential Revision: D18854899
Pulled By: pdillinger
fbshipit-source-id: 9eb5294b9f11b208dc1a8cc148aaa31e47ff892b
Summary:
This test is crashing on ARM but is not yet production code.
Let's not let it block ARM CI. See PR https://github.com/facebook/rocksdb/issues/5932
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6126
Test Plan:
./folly_synchronization_distributed_mutex_test, on Linux/ARM,
on Linux/x86_64, and with LITE=1 on Linux/x86_64 (also disabled)
Differential Revision: D18836576
Pulled By: pdillinger
fbshipit-source-id: d8a36eea2f048e8330411d994435d1c58a15d978
Summary:
PR https://github.com/facebook/rocksdb/issues/5937 changed the db_stress tool to also require db_stress_tool.cc,
and updated the Makefile but not the CMakeLists.txt file. This updates
the CMakeLists.txt file so that the CMake build succeeds again.
PR https://github.com/facebook/rocksdb/issues/5950 updated the Makefile build to package db_stress_tool.cc into
its own librocksdb_stress.a library. I haven't done that here since
there didn't really seem to be much benefit: the Makefile-based build
does not install this library.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6117
Test Plan: Confirmed the CMake build succeeds on an Ubuntu 18.04 system.
Differential Revision: D18835053
Pulled By: riversand963
fbshipit-source-id: 6e2a66834716e73b1eb736d9b7159870defffec5
Summary:
Before this fix, `make all` will emit full compilation command when building
object files in the third-party/folly directory even if default verbosity is
0 (AM_DEFAULT_VERBOSITY).
Test Plan (devserver):
```
$make all | tee build.log
$make check
```
Check build.log to verify.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6120
Differential Revision: D18795621
Pulled By: riversand963
fbshipit-source-id: 04641a8359cd4fd55034e6e797ed85de29ee2fe2
Summary:
```
In file included from /usr/include/c++/4.8.2/algorithm:62:0,
from ./db/merge_context.h:7,
from ./db/dbformat.h:16,
from ./tools/block_cache_analyzer/block_cache_trace_analyzer.h:12,
from tools/block_cache_analyzer/block_cache_trace_analyzer.cc:8:
/usr/include/c++/4.8.2/bits/stl_algo.h: In instantiation of ‘_RandomAccessIterator std::__unguarded_partition(_RandomAccessIterator, _RandomAccessIterator, const _Tp&, _Compare) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<std::pair<std::basic_string<char>, long unsigned int>*, std::vector<std::pair<std::basic_string<char>, long unsigned int> > >; _Tp = std::pair<std::basic_string<char>, long unsigned int>; _Compare = rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1]’:
/usr/include/c++/4.8.2/bits/stl_algo.h:2296:78: required from ‘_RandomAccessIterator std::__unguarded_partition_pivot(_RandomAccessIterator, _RandomAccessIterator, _Compare) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<std::pair<std::basic_string<char>, long unsigned int>*, std::vector<std::pair<std::basic_string<char>, long unsigned int> > >; _Compare = rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1]’
/usr/include/c++/4.8.2/bits/stl_algo.h:2337:62: required from ‘void std::__introsort_loop(_RandomAccessIterator, _RandomAccessIterator, _Size, _Compare) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<std::pair<std::basic_string<char>, long unsigned int>*, std::vector<std::pair<std::basic_string<char>, long unsigned int> > >; _Size = long int; _Compare = rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1]’
/usr/include/c++/4.8.2/bits/stl_algo.h:5499:44: required from ‘void std::sort(_RAIter, _RAIter, _Compare) [with _RAIter = __gnu_cxx::__normal_iterator<std::pair<std::basic_string<char>, long unsigned int>*, std::vector<std::pair<std::basic_string<char>, long unsigned int> > >; _Compare = rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1’
tools/block_cache_analyzer/block_cache_trace_analyzer.cc:583:79: required from here
/usr/include/c++/4.8.2/bits/stl_algo.h:2263:35: error: no match for call to ‘(rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1) (std::pair<std::basic_string<char>, long unsigned int>&, const std::pair<std::basic_string<char>, long unsigned int>&)’
while (__comp(*__first, __pivot))
^
tools/block_cache_analyzer/block_cache_trace_analyzer.cc:582:9: note: candidates are:
[=](std::pair<std::string, uint64_t>& a,
^
In file included from /usr/include/c++/4.8.2/algorithm:62:0,
from ./db/merge_context.h:7,
from ./db/dbformat.h:16,
from ./tools/block_cache_analyzer/block_cache_trace_analyzer.h:12,
from tools/block_cache_analyzer/block_cache_trace_analyzer.cc:8:
/usr/include/c++/4.8.2/bits/stl_algo.h:2263:35: note: bool (*)(std::pair<std::basic_string<char>, long unsigned int>&, std::pair<std::basic_string<char>, long unsigned int>&) <conversion>
while (__comp(*__first, __pivot))
^
/usr/include/c++/4.8.2/bits/stl_algo.h:2263:35: note: candidate expects 3 arguments, 3 provided
tools/block_cache_analyzer/block_cache_trace_analyzer.cc:583:46: note: rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1
std::pair<std::string, uint64_t>& b) { return b.second < a.second; });
^
tools/block_cache_analyzer/block_cache_trace_analyzer.cc:583:46: note: no known conversion for argument 2 from ‘const std::pair<std::basic_string<char>, long unsigned int>’ to ‘std::pair<std::basic_string<char>, long unsigned int>&’
In file included from /usr/include/c++/4.8.2/algorithm:62:0,
from ./db/merge_context.h:7,
from ./db/dbformat.h:16,
from ./tools/block_cache_analyzer/block_cache_trace_analyzer.h:12,
from tools/block_cache_analyzer/block_cache_trace_analyzer.cc:8:
/usr/include/c++/4.8.2/bits/stl_algo.h:2266:34: error: no match for call to ‘(rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1) (const std::pair<std::basic_string<char>, long unsigned int>&, std::pair<std::basic_string<char>, long unsigned int>&)’
while (__comp(__pivot, *__last))
^
tools/block_cache_analyzer/block_cache_trace_analyzer.cc:582:9: note: candidates are:
[=](std::pair<std::string, uint64_t>& a,
^
In file included from /usr/include/c++/4.8.2/algorithm:62:0,
from ./db/merge_context.h:7,
from ./db/dbformat.h:16,
from ./tools/block_cache_analyzer/block_cache_trace_analyzer.h:12,
from tools/block_cache_analyzer/block_cache_trace_analyzer.cc:8:
/usr/include/c++/4.8.2/bits/stl_algo.h:2266:34: note: bool (*)(std::pair<std::basic_string<char>, long unsigned int>&, std::pair<std::basic_string<char>, long unsigned int>&) <conversion>
while (__comp(__pivot, *__last))
^
/usr/include/c++/4.8.2/bits/stl_algo.h:2266:34: note: candidate expects 3 arguments, 3 provided
tools/block_cache_analyzer/block_cache_trace_analyzer.cc:583:46: note: rocksdb::BlockCacheTraceAnalyzer::WriteSkewness(const string&, const std::vector<long unsigned int>&, rocksdb::TraceType) const::__lambda1
std::pair<std::string, uint64_t>& b) { return b.second < a.second; });
^
tools/block_cache_analyzer/block_cache_trace_analyzer.cc:583:46: note: no known conversion for argument 1 from ‘const std::pair<std::basic_string<char>, long unsigned int>’ to ‘std::pair<std::basic_string<char>, long unsigned int>&’
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6106
Differential Revision: D18783943
Pulled By: riversand963
fbshipit-source-id: cc7fc10565f0210b9eebf46b95cb4950ec0b15fa
Summary:
After secondary instance replays the logs from primary, certain files become
obsolete. The secondary should find these files, evict their table readers from
table cache and close them. If this is not done, the secondary will hold on to
these files and prevent their space from being freed.
Test plan (devserver):
```
$./db_secondary_test --gtest_filter=DBSecondaryTest.SecondaryCloseFiles
$make check
$./db_stress -ops_per_thread=100000 -enable_secondary=true -threads=32 -secondary_catch_up_one_in=10000 -clear_column_family_one_in=1000 -reopen=100
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6114
Differential Revision: D18769998
Pulled By: riversand963
fbshipit-source-id: 5d1f151567247196164e1b79d8402fa2045b9120
Summary:
Inserting an entry in the block cache with 0 length key is a valid use case. Remove the assertion in ```LRUHandle::CalcTotalCharge```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6115
Differential Revision: D18769693
Pulled By: anand1976
fbshipit-source-id: 34cc159650300dda6d7273480640478f28392cda
Summary:
Adds two missing functions to the C-API:
- `rocksdb_block_based_options_set_data_block_index_type`
- `rocksdb_block_based_options_set_data_block_hash_ratio`
This enables users in other languages to enjoy the new(-ish) feature.
The changes here are partially overlapping with [another PR](https://github.com/facebook/rocksdb/pull/5630) but are more focused on the DataBlock indexing options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6101
Differential Revision: D18765639
fbshipit-source-id: 4a8947e71b179f26fa1eb83c267dd47ee64ac3b3
Summary:
To reflect changes in PR https://github.com/facebook/rocksdb/issues/6072
This comment also implies that a seemingly valid use-case for
max_valid_backups_to_open is flawed: even if you only want to add a new
backup without trying to delete, you might need to clean up after a
backup creation that never finished. To clean up properly requires
opening all backups to get proper ref counts on shared files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6105
Test Plan: code comment only
Differential Revision: D18736716
Pulled By: pdillinger
fbshipit-source-id: 2447c0000eefe3a4ca606926bfe922a8456b0cb7
Summary:
RocksDB should decrement the counter `unscheduled_flushes_` as soon as the bg
thread is scheduled. Before this fix, the counter is decremented only when the
bg thread starts and picks an element from the flush queue. This may cause more
than necessary bg threads to be scheduled. Not a correctness issue, but may
affect flush thread count.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6104
Test Plan:
```
make check
```
Differential Revision: D18735584
Pulled By: riversand963
fbshipit-source-id: d36272d4a08a494aeeab6200a3cff7a3d1a2dc10
Summary:
format_version=5 enables new Bloom filter. Using 2/5
probability for "latest and greatest" rather than naive 1/4.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6102
Test Plan: start 'make blackbox_crash_test'
Differential Revision: D18735685
Pulled By: pdillinger
fbshipit-source-id: e81529c8a3f53560d246086ee5f92ee7d79a2eab
Summary:
From the reset of the code, it looks this this maybe can be unconditionally given the attribute? But I couldn't test with MSVC so I defensively put under CPP.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6075
Differential Revision: D18723749
fbshipit-source-id: 45fc8732c28dd29aab1644225d68f3c6f39bd69b
Summary:
options.periodic_compaction_seconds isn't supported when options.max_open_files != -1. It's because that the information of file creation time is stored in table properties and are not guaranteed to be loaded unless options.max_open_files = -1. Relax this constraint by storing the information in manifest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6090
Test Plan: Pass all existing tests; Modify an existing test to force the manifest value to take 0 to simulate backward compatibility case; manually open the DB generated with the change by release 4.2.
Differential Revision: D18702268
fbshipit-source-id: 13e0bd94f546498a04f3dc5fc0d9dff5125ec9eb
Summary:
Some of the entries were incorrectly listed under 6.5.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6096
Differential Revision: D18722801
Pulled By: gfosco
fbshipit-source-id: 18d1187deb6a9d69a8feb68b727d2f720a65f2bc
Summary:
This change enables custom implementations of FilterPolicy to
wrap a variety of NewBloomFilterPolicy and select among them based on
contextual information such as table level and compaction style.
* Moves FilterBuildingContext to public API and elaborates it with more
useful data. (It would be nice to put more general options-like data,
but at the time this object is constructed, we are using internal APIs
ImmutableCFOptions and MutableCFOptions and don't have easy access to
ColumnFamilyOptions that I can tell.)
* Renames BloomFilterPolicy::GetFilterBitsBuilderInternal to
GetBuilderWithContext, because it's now public.
* Plumbs through the table's "level_at_creation" for filter building
context.
* Simplified some tests by adding GetBuilder() to
MockBlockBasedTableTester.
* Adds test as DBBloomFilterTest.ContextCustomFilterPolicy, including
sample wrapper class LevelAndStyleCustomFilterPolicy.
* Fixes a cross-test bug in DBBloomFilterTest.OptimizeFiltersForHits
where it does not reset perf context.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6088
Test Plan: make check, valgrind on db_bloom_filter_test
Differential Revision: D18697817
Pulled By: pdillinger
fbshipit-source-id: 5f987a2d7b07cc7a33670bc08ca6b4ca698c1cf4
Summary:
**NOTE**: this also needs to be back-ported to 6.4.6 and possibly older branches if further releases from them is envisaged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6081
Differential Revision: D18710107
Pulled By: zhichao-cao
fbshipit-source-id: 03260f9316566e2bfc12c7d702d6338bb7941e01
Summary:
Add the jni library for musl-libc, specifically for incorporating into Alpine based docker images. The classifier is `musl64`.
I have signed the CLA electronically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3143
Differential Revision: D18719372
fbshipit-source-id: 6189d149310b6436d6def7d808566b0234b23313
Summary:
This patch factors out the logic that reads a (potentially compressed) blob
from a file into a separate helper method `GetRawBlobFromFile`, and cleans
up the code a bit. Also, errors during decompression are now logged/propagated
to the user by returning a `Status` code of `Corruption`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6093
Test Plan: `make check`
Differential Revision: D18716673
Pulled By: ltamasi
fbshipit-source-id: 44144bc064cab616862d5643f34384f2bae6eb78
Summary:
There's no technological impediment to allowing the Bloom
filter bits/key to be non-integer (fractional/decimal) values, and it
provides finer control over the memory vs. accuracy trade-off. This is
especially handy in using the format_version=5 Bloom filter in place
of the old one, because bits_per_key=9.55 provides the same accuracy as
the old bits_per_key=10.
This change not only requires refining the logic for choosing the best
num_probes for a given bits/key setting, it revealed a flaw in that logic.
As bits/key gets higher, the best num_probes for a cache-local Bloom
filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a
standard Bloom filter. For example, at 16 bits per key, the best
num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%).
This change fixes and refines that logic (for the format_version=5
Bloom filter only, just in case) based on empirical tests to find
accuracy inflection points between each num_probes.
Although bits_per_key is now specified as a double, the new Bloom
filter converts/rounds this to "millibits / key" for predictable/precise
internal computations. Just in case of unforeseen compatibility
issues, we round to the nearest whole number bits / key for the
legacy Bloom filter, so as not to unlock new behaviors for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092
Test Plan: unit tests included
Differential Revision: D18711313
Pulled By: pdillinger
fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
Summary:
The patch refactors and cleans up the logic around creating new blob files
by moving the common code of `SelectBlobFile` and `SelectBlobFileTTL`
to a new helper method `CreateBlobFileAndWriter`, bringing the implementation
of `SelectBlobFile` and `SelectBlobFileTTL` into sync, and increasing encapsulation
by adding new constructors for `BlobFile` and `BlobLogHeader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6066
Test Plan:
Ran `make check` and used the BlobDB mode of `db_bench` to sanity test both
the TTL and the non-TTL code paths.
Differential Revision: D18646921
Pulled By: ltamasi
fbshipit-source-id: e5705a84807932e31dccab4f49b3e64369cea26d
Summary:
This fixes MinGW cross compilation from case-sensative file systems, at no harm to MinGW builds on Windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6076
Differential Revision: D18710554
fbshipit-source-id: a9f299ac3aa019f7dbc07ed0c4a79e19cf99b488
Summary:
**NOTE**: This also needs to be back-ported to be 6.4.6
Fix a regression introduced in f2bf0b2 by https://github.com/facebook/rocksdb/pull/5674 whereby the compiled library would get the wrong name on PPC64LE platforms.
On PPC64LE, the regression caused the library to be named `librocksdbjni-linux64.so` instead of `librocksdbjni-linux-ppc64le.so`.
This PR corrects the name back to `librocksdbjni-linux-ppc64le.so` and also corrects the ordering of conditional arguments in the Makefile to match the expected order as defined in the documentation for Make.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6080
Differential Revision: D18710351
fbshipit-source-id: d4db87ef378263b57de7f9edce1b7d15644cf9de
Summary:
* We can reuse downloaded 3rd-party libraries
* We can isolate the build to a Docker volume. This is useful for investigating failed builds, as we can examine the volume by assigning it a name during the build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6079
Differential Revision: D18710263
fbshipit-source-id: 93f456ba44b49e48941c43b0c4d53995ecc1f404
Summary:
default constructor not used or even defined
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6086
Differential Revision: D18695669
Pulled By: pdillinger
fbshipit-source-id: 6b6ac46029f4fb6edf1c11ee6ce1d9f172b2eaf2
Summary:
By default options.ttl is disabled. We believe a better default will be 30 days, which means deleted data the database will be removed from SST files slightly after 30 days, for most of the cases.
Make the default UINT64_MAX - 1 to indicate that it is not overridden by users.
Change periodic_compaction_seconds to be UINT64_MAX - 1 to UINT64_MAX too to be consistent. Also fix a small bug in the previous periodic_compaction_seconds default code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6073
Test Plan: Add unit tests for it.
Differential Revision: D18669626
fbshipit-source-id: 957cd4374cafc1557d45a0ba002010552a378cc8
Summary:
This change ignores the value of BackupableDBOptions::max_valid_backups_to_open when a BackupEngine is not read-only.
Issue: https://github.com/facebook/rocksdb/issues/4997
Note on tests: I had to remove test case WriteOnlyEngine of BackupableDBTest because it was not consistent with the new semantic of BackupableDBOptions::max_valid_backups_to_open. Maybe, we should think about adding a new interface for append-only BackupEngines. On the other hand, I changed LimitBackupsOpened test case to use a read-only BackupEngine, and I added a new specific test case for the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6072
Reviewed By: pdillinger
Differential Revision: D18687364
Pulled By: sebastianopeluso
fbshipit-source-id: 77bc1f927d623964d59137a93de123bbd719da4e
Summary:
`options.ttl` is now supported in universal compaction, similar to how periodic compactions are implemented in PR https://github.com/facebook/rocksdb/issues/5970 .
Setting `options.ttl` will simply set `options.periodic_compaction_seconds` to execute the periodic compactions code path.
Discarded PR https://github.com/facebook/rocksdb/issues/4749 in lieu of this.
This is a short term work-around/hack of falling back to periodic compactions when ttl is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6071
Test Plan: Added a unit test.
Differential Revision: D18668336
Pulled By: sagar0
fbshipit-source-id: e75f5b81ba949f77ef9eff05e44bb1c757f58612
Summary:
As described in detail in issue https://github.com/facebook/rocksdb/issues/6048, iterators' dereference operators
(`*`, `->`, and `[]`) should return `pointer`s/`reference`s (as opposed to
`const_pointer`s/`const_reference`s) even if the iterator itself is `const`
to be in sync with the standard's iterator concept.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6057
Test Plan: make check
Differential Revision: D18623235
Pulled By: ltamasi
fbshipit-source-id: 04e82d73bc0c67fb0ded018383af8dfc332050cc
Summary:
Previously, options.ttl cannot be set with options.max_open_files = -1, because it makes use of creation_time field in table properties, which is not available unless max_open_files = -1. With this commit, the information will be stored in manifest and when it is available, will be used instead.
Note that, this change will break forward compatibility for release 5.1 and older.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6060
Test Plan: Extend existing test case to options.max_open_files != -1, and simulate backward compatility in one test case by forcing the value to be 0.
Differential Revision: D18631623
fbshipit-source-id: 30c232a8672de5432ce9608bb2488ecc19138830
Summary:
`${TESTUTILLIB}` should be linked with targets`${LIBS}`, otherwise it may not find the references. After that, we have to work fine with `${CMAKE_CURRENT_SOURCE_DIR}` in `cmake/modules/ReadVersion.cmake`, while building external projects with `add_subdirectory(/path/to/rocksdb)`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6045
Differential Revision: D18641791
Pulled By: pdillinger
fbshipit-source-id: a56b03b4dda6bae6edce1375324f51340917dddc
Summary:
Signed-off-by: Little-Wallace <bupt2013211450@gmail.com>
This PR is to fix unstable unit test added by (https://github.com/facebook/rocksdb/pull/5958).
I set SYNC_POINT in PickCompaction before. If IntraL0Compaction was trigger, the compact job which compact sst to base level would start instantly. If the compaction thread run faster than unittest main thread, we may observe the number of files in L0 reduce.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6061
Differential Revision: D18642301
fbshipit-source-id: 3e4da2ee963532b6e142336951ea3f47d46df148
Summary:
Use db mutex to protect the execution of Version::GetColumnFamilyMetaData()
called in DBImpl::GetColumnFamilyMetaData().
Without mutex, GetColumnFamilyMetaData() races with MarkFilesBeingCompacted()
for access to FileMetaData::being_compacted.
Other than mutex, there are several more alternatives.
- Make FileMetaData::being_compacted an atomic variable. This will make
FileMetaData non-copy-able.
- Separate being_compacted from FileMetaData. This requires re-organizing data
structures that are already used in many places.
Test Plan (dev server):
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6056
Differential Revision: D18620488
Pulled By: riversand963
fbshipit-source-id: 87f89660b5d5e2ab4ef7962b7b2a7d00e346aa3b
Summary:
The intention of the example for read committed is clearer with these added asserts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6055
Test Plan: `cd examples && make transaction_example && ./transaction_example`
Differential Revision: D18621830
Pulled By: riversand963
fbshipit-source-id: a94b08c5958b589049409ee4fc4d6799e5cbef79
Summary:
This is a required operator for random-access iterators, and an upcoming update for Visual Studio 2019 will change the C++ Standard Library's heap algorithms to use this operator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6047
Differential Revision: D18618531
Pulled By: ltamasi
fbshipit-source-id: 08d10bc85bf2dbc3f7ef0fa3c777e99f1e927ef5
Summary:
The new DB::MultiGet() doesn't validate input for num_keys > 1 and GCC-9 complains about it. Fix it by directly return when num_keys == 0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6054
Test Plan: Build with GCC-9 and see it passes.
Differential Revision: D18608958
fbshipit-source-id: 1c279aff3c7fe6e9d5a6d085ed02550ecea4fdb2
Summary:
## Problem Description
Our process was abort when it call `CheckConsistency`. And the information in `stderr` show that "`L0 files seqno 3001491972 3004797440 vs. 3002875611 3004524421` ". Here are the causes of the accident I investigated.
* RocksDB will call `CheckConsistency` whenever `MANIFEST` file is update. It will check sequence number interval of every file, except files which were ingested.
* When one file is ingested into RocksDB, it will be assigned the value of global sequence number, and the minimum and maximum seqno of this file are equal, which are both equal to global sequence number.
* `CheckConsistency` determines whether the file is ingested by whether the smallest and largest seqno of an sstable file are equal.
* If IntraL0Compaction picks one sst which was ingested just now and compacted it into another sst, the `smallest_seqno` of this new file will be smaller than his `largest_seqno`.
* If more than one ingested file was ingested before memtable schedule flush, and they all compact into one new sstable file by `IntraL0Compaction`. The sequence interval of this new file will be included in the interval of the memtable. So `CheckConsistency` will return a `Corruption`.
* If a sstable was ingested after the memtable was schedule to flush, which would assign a larger seqno to it than memtable. Then the file was compacted with other files (these files were all flushed before the memtable) in L0 into one file. This compaction start before the flush job of memtable start, but completed after the flush job finish. So this new file produced by the compaction (we call it s1) would have a larger interval of sequence number than the file produced by flush (we call it s2). **But there was still some data in s1 written into RocksDB before the s2, so it's possible that some data in s2 was cover by old data in s1.** Of course, it would also make a `Corruption` because of overlap of seqno. There is the relationship of the files:
> s1.smallest_seqno < s2.smallest_seqno < s2.largest_seqno < s1.largest_seqno
So I skip pick sst file which was ingested in function `FindIntraL0Compaction `
## Reason
Here is my bug report: https://github.com/facebook/rocksdb/issues/5913
There are two situations that can cause the check to fail.
### First situation：
- First we ingest five external sst into Rocksdb, and they happened to be ingested in L0. and there had been some data in memtable, which make the smallest sequence number of memtable is less than which of sst that we ingest.
- If there had been one compaction job which compacted sst from L0 to L1, `LevelCompactionPicker` would trigger a `IntraL0Compaction` which would compact this five sst from L0 to L0. We call this sst A, which was merged from five ingested sst.
- Then some data was put into memtable, and memtable was flushed to L0. We called this sst B.
- RocksDB check consistency , and find the `smallest_seqno` of B is less than that of A and crash. Because A was merged from five sst, the smallest sequence number of it was less than the biggest sequece number of itself, so RocksDB could not tell if A was produce by ingested.
### Secondary situaion
- First we have flushed many sst in L0, we call them [s1, s2, s3].
- There is an immutable memtable request to be flushed, but because flush thread is busy, so it has not been picked. we call it m1. And at the moment, one sst is ingested into L0. We call it s4. Because s4 is ingested after m1 became immutable memtable, so it has a larger log sequence number than m1.
- m1 is flushed in L0. because it is small, this flush job finish quickly. we call it s5.
- [s1, s2, s3, s4] are compacted into one sst to L0, by IntraL0Compaction. We call it s6.
- compacted 4@0 files to L0
- When s6 is added into manifest, the corruption happened. because the largest sequence number of s6 is equal to s4, and they are both larger than that of s5. But because s1 is older than m1, so the smallest sequence number of s6 is smaller than that of s5.
- s6.smallest_seqno < s5.smallest_seqno < s5.largest_seqno < s6.largest_seqno
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5958
Differential Revision: D18601316
fbshipit-source-id: 5fe54b3c9af52a2e1400728f565e895cde1c7267
Summary:
The SetOptions API used by the test is not supported in LITE mode,
so we should skip the new chunk in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6052
Test Plan: Ran the unit tests both in regular and LITE mode.
Differential Revision: D18601763
Pulled By: ltamasi
fbshipit-source-id: 883d6882771e0fb4aae72bb77ba4e63d9febec04
Summary:
Recently, a bug was found related to a seek key that is close to SST file boundary. However, it only occurs in a very small chance in db_stress, because the chance that a random key hits SST file boundaries is small. To boost the chance, with 1/16 chance, we pick keys that are close to SST file boundaries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6037
Test Plan: Did some manual printing out, and hack to cover the key generation logic to be correct.
Differential Revision: D18598476
fbshipit-source-id: 13b76687d106c5be4e3e02a0c77fa5578105a071
Summary:
Fix: when `db_iter` falls back to using seek by `FindValueForCurrentKeyUsingSeek`, `is_blob_` flag is not properly set on encountering BlobIndex.
Also patch existing test for the mentioned code path.
Signed-off-by: tabokie <xy.tao@outlook.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6051
Differential Revision: D18596274
Pulled By: ltamasi
fbshipit-source-id: 8e4714af263b99dc2c379707d50db88fe6799278
Summary:
GetSupportedCompressions() is not available in LITE build, so check and use Snappy compression in db_basic_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6050
Test Plan:
make LITE=1 check
make check
Differential Revision: D18588114
Pulled By: anand1976
fbshipit-source-id: a193de58c44f91bcc237107f25dbc1b9458eef3d
Summary:
The patch adds logic to mark no longer needed blob files obsolete upon database open
and whenever a flush or compaction completes. Unneeded blob files are detected by
iterating through live immutable non-TTL blob files starting from the lowest-numbered one,
and stopping when a blob file used by any SSTs or potentially used by memtables is found.
(The latter is determined by comparing the sequence number at which the blob file
became immutable with the largest sequence number received in flush notifications.)
In addition, the patch cleans up the logic around closing and obsoleting blob files and
enforces invariants around this area (blob files are now guaranteed to go through the
stages mutable-non-obsolete, immutable-non-obsolete, and immutable-obsolete in this
order).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6032
Test Plan: Extended unit tests and tested using the BlobDB mode of `db_bench`.
Differential Revision: D18495610
Pulled By: ltamasi
fbshipit-source-id: 11825b84af74f3f4abfd9bcae04e80870ae58961
Summary:
Right now, in db_stress, as long as prefix extractor is defined, TestIterator always uses. There is value of cover total_order_seek = true when prefix extractor is define. Add a small chance that this flag is turned on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6039
Test Plan: Run the test for a while.
Differential Revision: D18539689
fbshipit-source-id: 568790dd7789c9986b83764b870df0423a122d99
Summary:
The ParallelIO/DBBasicTestWithParallelIO.MultiGet/11 test fails if Snappy compression library is not installed, since RocksDB defaults to Snappy if none is specified. So dynamically determine the supported compression types and pick the first one.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6038
Differential Revision: D18532370
Pulled By: anand1976
fbshipit-source-id: a0a735114d1f8892ea09f7c4af8688d7bcc5b075
Summary:
When two_write_queue enable, IngestExternalFile performs EnterUnbatched on both write queues. SwitchMemtable also EnterUnbatched on 2nd write queue when this option is enabled. When the call stack includes IngestExternalFile -> FlushMemTable -> SwitchMemtable, this results into a deadlock.
The implemented solution is to pass on the existing writes_stopped argument in FlushMemTable to skip EnterUnbatched in SwitchMemtable.
Fixes https://github.com/facebook/rocksdb/issues/5974
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5976
Differential Revision: D18535943
Pulled By: maysamyabandeh
fbshipit-source-id: a4f9d4964c10d4a7ca06b1e0102ca2ec395512bc
Summary:
SmallestUnCommittedSeq sometimes takes too long when run under Valgrind. The patch disables it when the tests are run under Valgrind.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6035
Differential Revision: D18509198
Pulled By: maysamyabandeh
fbshipit-source-id: 1191443b9fedb6b9c50d6b76f5c92371f5030230
Summary:
Had complications with LITE build and valgrind test.
Reverts/fixes small parts of PR https://github.com/facebook/rocksdb/issues/6007
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6036
Test Plan:
make LITE=1 all check
and
ROCKSDB_VALGRIND_RUN=1 DISABLE_JEMALLOC=1 make -j24 db_bloom_filter_test && ROCKSDB_VALGRIND_RUN=1 DISABLE_JEMALLOC=1 ./db_bloom_filter_test
Differential Revision: D18512238
Pulled By: pdillinger
fbshipit-source-id: 37213cf0d309edf11c483fb4b2fb6c02c2cf2b28
Summary:
Right now, crash_test always uses 16KB max_manifest_file_size value. It is good to cover logic of manifest file switch. However, information stored in manifest files might be useful in debugging failures. Switch to only use small manifest file size in 1/15 of the time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6034
Test Plan: Observe command generated by db_crash_test.py multiple times and see the --max_manifest_file_size value distribution.
Differential Revision: D18513824
fbshipit-source-id: 7b3ae6dbe521a0918df41064e3fa5ecbf2466e04
Summary:
Production:
* Fixes GarbageCollect (and auto-GC triggered by PurgeOldBackups, DeleteBackup, or CreateNewBackup) to clean up backup directory independent of current settings (except max_valid_backups_to_open; see issue https://github.com/facebook/rocksdb/issues/4997) and prior settings used with same backup directory.
* Fixes GarbageCollect (and auto-GC) not to attempt to remove "." and ".." entries from directories.
* Clarifies contract with users in modifying BackupEngine operations. In short, leftovers from any incomplete operation are cleaned up by any subsequent call to that same kind of operation (PurgeOldBackups and DeleteBackup considered the same kind of operation). GarbageCollect is available to clean up after all kinds. (NB: right now PurgeOldBackups and DeleteBackup will clean up after incomplete CreateNewBackup, but we aren't promising to continue that behavior.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6023
Test Plan:
* Refactors open parameters to use an option enum, for readability, etc. (Also fixes an unused parameter bug in the redundant OpenDBAndBackupEngineShareWithChecksum.)
* Fixes an apparent bug in ShareTableFilesWithChecksumsTransition in which old backup data was destroyed in the transition to be tested. That test is now augmented to ensure GarbageCollect (or auto-GC) does not remove shared files when BackupEngine is opened with share_table_files=false.
* Augments DeleteTmpFiles test to ensure that CreateNewBackup does auto-GC when an incompletely created backup is detected.
Differential Revision: D18453559
Pulled By: pdillinger
fbshipit-source-id: 5e54e7b08d711b161bc9c656181012b69a8feac4
Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.
Speed
The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.
Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):
$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
Single filter net ns/op: 26.2825
Random filter net ns/op: 150.459
Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
Single filter net ns/op: 63.2978
Random filter net ns/op: 188.038
Average FP rate %: 1.13823
Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.
The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.
Accuracy
The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.
Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)
Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120
Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.
Compatibility
Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007
Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).
Differential Revision: D18294749
Pulled By: pdillinger
fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
Summary:
Recent change https://github.com/facebook/rocksdb/pull/5861 mistakely use "prefix_extractor_ != nullptr" as the condition to determine whehter prefix bloom filter isused. It fails to consider read_options.total_order_seek, so it is wrong. The result is that an optimization for non-total-order seek is mistakely applied to total order seek, and introduces a bug in following corner case:
Because of RangeDelete(), a file's largest key is extended. Seek key falls into the range deleted file, so level iterator seeks into the previous file without getting any key. The correct behavior is to place the iterator to the first key of the next file. However, an optimization is triggered and invalidates the iterator because it is out of the prefix range, causing wrong results. This behavior is reproduced in the unit test added.
Fix the bug by setting prefix_extractor to be null if total order seek is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6028
Test Plan: Add a unit test which fails without the fix.
Differential Revision: D18479063
fbshipit-source-id: ac075f013029fcf69eb3a598f14c98cce3e810b3
Summary:
Bug in PR https://github.com/facebook/rocksdb/issues/5941 when char is unsigned that should only affect
assertion on unused/invalid filter metadata.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6024
Test Plan: on ARM: ./bloom_test && ./db_bloom_filter_test && ./block_based_filter_block_test && ./full_filter_block_test && ./partitioned_filter_block_test
Differential Revision: D18461206
Pulled By: pdillinger
fbshipit-source-id: 68a7c813a0b5791c05265edc03cdf52c78880e9a
Summary:
Add a new API that allows a user to call MultiGet specifying multiple keys belonging to different column families. This is mainly useful for users who want to do a consistent read of keys across column families, with the added performance benefits of batching and returning values using PinnableSlice.
As part of this change, the code in the original multi-column family MultiGet for acquiring the super versions has been refactored into a separate function that can be used by both, the batching and the non-batching versions of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5816
Test Plan:
make check
make asan_check
asan_crash_test
Differential Revision: D18408676
Pulled By: anand1976
fbshipit-source-id: 933e7bec91dd70e7b633be4ff623a1116cc28c8d
Summary:
Right now, db_stress doesn't cover SeekForPrev(). Add the coverage, which mirrors what we do for Seek().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6022
Test Plan: Run "make crash_test". Do some manual source code hack to simular iterator wrong results and see it caught.
Differential Revision: D18442193
fbshipit-source-id: 879b79000d5e33c625c7e970636de191ccd7776c
Summary:
The calculation in BlockBasedTable::MultiGet for the required buffer length for reading in compressed blocks is incorrect. It needs to take the 5-byte block trailer into account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6014
Test Plan: Add a unit test DBBasicTest.MultiGetBufferOverrun that fails in asan_check before the fix, and passes after.
Differential Revision: D18412753
Pulled By: anand1976
fbshipit-source-id: 754dfb66be1d5f161a7efdf87be872198c7e3b72
Summary:
Fix issue https://github.com/facebook/rocksdb/issues/6012.
I found that it may be caused by the following codes in function _RemoveOldMemTables()_ in **db/memtable_list.cc** :
```
for (auto it = memlist.rbegin(); it != memlist.rend(); ++it) {
MemTable* mem = *it;
if (mem->GetNextLogNumber() > log_number) {
break;
}
current_->Remove(mem, to_delete);
```
The iterator **it** turns invalid after `current_->Remove(mem, to_delete);`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6013
Test Plan:
```
make check
```
Differential Revision: D18401107
Pulled By: riversand963
fbshipit-source-id: bf0da3b868ed70f7aff24cf7b3e2049c0c5c7a4e
Summary:
When users use Level-Compaction-with-TTL by setting `cf_options.ttl`, the ttl-expired data could take n*ttl time to reach the bottom level (where n is the number of levels) due to how the `creation_time` table property was calculated for the newly created files during compaction. The creation time of new files was set to a max of all compaction-input-files-creation-times which essentially resulted in resetting the ttl as the key range moves across levels. This behavior is now fixed by changing the `creation_time` to be based on minimum of all compaction-input-files-creation-times; this will cause cascading compactions across levels for the ttl-expired data to move to the bottom level, resulting in getting rid of tombstones/deleted-data faster.
This will help start cascading compactions to move the expired key range to the bottom-most level faster.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5992
Test Plan: `make check`
Differential Revision: D18257883
Pulled By: sagar0
fbshipit-source-id: 00df0bb8d0b7e14d9fc239df2cba8559f3e54cbc
Summary:
The patch adds logic to BlobDB to maintain the mapping between blob files
and SSTs for which the blob file in question is the oldest blob file referenced
by the SST file. The mapping is initialized during database open based on the
information retrieved using `GetLiveFilesMetaData`, and updated after
flushes/compactions based on the information received through the `EventListener`
interface (or, in the case of manual compactions issued through the `CompactFiles`
API, the `CompactionJobInfo` object).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6020
Test Plan: Added a unit test; also tested using the BlobDB mode of `db_bench`.
Differential Revision: D18410508
Pulled By: ltamasi
fbshipit-source-id: dd9e778af781cfdb0d7056298c54ba9cebdd54a5
Summary:
Only if there is a crash, power failure, or I/O error in
DeleteBackup, shared or private files from the backup might be left
behind that are not cleaned up by PurgeOldBackups or DeleteBackup-- only
by GarbageCollect. This makes the BackupEngine API "leaky by default."
Even if it means a modest performance hit, I think we should make
Delete and Purge do as they say, with ongoing best effort: i.e. future
calls will attempt to finish any incomplete work from earlier calls.
This change does that by having DeleteBackup and PurgeOldBackups do a
GarbageCollect, unless (to minimize performance hit) this BackupEngine
has already done a GarbageCollect and there have been no
deletion-related I/O errors in that GarbageCollect or since then.
Rejected alternative 1: remove meta file last instead of first. This would in theory turn partially deleted backups into corrupted backups, but code changes would be needed to allow the missing files and consider it acceptably corrupt, rather than failing to open the BackupEngine. This might be a reasonable choice, but I mostly rejected it because it doesn't solve the legacy problem of cleaning up existing lingering files.
Rejected alternative 2: use a deletion marker file. If deletion started with creating a file that marks a backup as flagged for deletion, then we could reliably detect partially deleted backups and efficiently finish removing them. In addition to not solving the legacy problem, this could be precarious if there's a disk full situation, and we try to create a new file in order to delete some files. Ugh.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6015
Test Plan: Updated unit tests
Differential Revision: D18401333
Pulled By: pdillinger
fbshipit-source-id: 12944e372ce6809f3f5a4c416c3b321a8927d925
Summary:
The test would fire two flushes to let them run in parallel. Previously it wait for the first job to be scheduled before firing the second. It is possible the job is not started before the second job being scheduled, making the two job combine into one. Change to wait for the first job being started.
Fixes https://github.com/facebook/rocksdb/issues/6017
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6018
Test Plan:
```
while ./db_flush_test --gtest_filter=*FireOnFlushCompletedAfterCommittedResult*; do :; done
```
and let it run for a while.
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D18405576
Pulled By: riversand963
fbshipit-source-id: 6ebb6262e033d5dc2ef81cb3eb410b314f2de4c9
Summary:
The patch exposes the file numbers of the SSTs as well as the oldest blob
files they contain a reference to through the GetColumnFamilyMetaData/
GetLiveFilesMetaData interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6011
Test Plan:
Fixed and extended the existing unit tests. (The earlier ColumnFamilyMetaDataTest
wasn't really testing anything because the generated memtables were never
flushed, so the metadata structure was essentially empty.)
Differential Revision: D18361697
Pulled By: ltamasi
fbshipit-source-id: d5ed1d94ac70858b84393c48711441ddfe1251e9
Summary:
From bzip2's official [download page](http://www.bzip.org/downloads.html), we could download it from sourceforge. This source would be more credible than previous web archive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5995
Differential Revision: D18377662
fbshipit-source-id: e8353f83d5d6ea6067f78208b7bfb7f0d5b49c05
Summary:
This PR fixes https://github.com/facebook/rocksdb/issues/5975. In ```BlockBasedTable::RetrieveMultipleBlocks()```, we were calling ```MaybeReadBlocksAndLoadToCache()```, which is a no-op if neither uncompressed nor compressed block cache are configured.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5991
Test Plan:
1. Add unit tests that fail with the old code and pass with the new
2. make check and asan_check
Cc spetrunia
Differential Revision: D18272744
Pulled By: anand1976
fbshipit-source-id: e62fa6090d1a6adf84fcd51dfd6859b03c6aebfe
Summary:
In stress test, all iterator verification is turned off is lower bound is enabled. This might be stricter than needed. This PR relaxes the condition and include the case where lower bound is lower than both of seek key and upper bound. It seems to work mostly fine when I run crash test locally.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5869
Test Plan: Run crash_test
Differential Revision: D18363578
fbshipit-source-id: 23d57e11ea507949b8100f4190ddfbe8db052d5a
Summary:
It's useful to add test coverage for universal compaction's periodic compaction. Add two tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6002
Test Plan: Run the two tests
Differential Revision: D18363544
fbshipit-source-id: bbd04b54057315f64f959709006412db1f76d170
Summary:
Recently, periodic compaction got turned on by default for leveled compaction is compaction filter is used. Since periodic compaction is now supported in universal compaction too, we do the same default for universal now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5994
Test Plan: Add a new unit test.
Differential Revision: D18363744
fbshipit-source-id: 5093288ce990ee3cab0e44ffd92d8489fbcd6a48
Summary:
TEST_GROUP=1 has sometimes been timing out but generally taking
45-50 minutes vs. 20-25 for groups 2-4. Beyond the compilation time, tests in
group 1 consist of about 19 minutes of db_test, and 7 minutes of everything
else. This change moves most of that "everything else" to group 2.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6010
Test Plan: Travis for this PR, oncall watch Travis
Differential Revision: D18373536
Pulled By: pdillinger
fbshipit-source-id: 0b3af004c71e4fd6bc01a94dac34cc3079fc9ce1
Summary:
Right now, in db_stress's CF consistency test's TestGet case, if failure happens, we do normal string printing, rather than hex printing, so that some text is not printed out, which makes debugging harder. Fix it by printing hex instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5989
Test Plan: Build db_stress and see t passes.
Differential Revision: D18363552
fbshipit-source-id: 09d1b8f6fbff37441cbe7e63a1aef27551226cec
Summary:
In the previous PR https://github.com/facebook/rocksdb/issues/4788, user can use db_bench mix_graph option to generate the workload that is from the social graph. The key is generated based on the key access hotness. In this PR, user can further model the key-range hotness and fit those to two-term-exponential distribution. First, user cuts the whole key space into small key ranges (e.g., key-ranges are the same size and the key-range number is the number of SST files). Then, user calculates the average access count per key of each key-range as the key-range hotness. Next, user fits the key-range hotness to two-term-exponential distribution (f(x) = f(x) = a*exp(b*x) + c*exp(d*x)) and generate the value of a, b, c, and d. They are the parameters in db_bench: prefix_dist_a, prefix_dist_b, prefix_dist_c, and prefix_dist_d. Finally, user can run db_bench by specify the parameters.
For example:
`./db_bench --benchmarks="mixgraph" -use_direct_io_for_flush_and_compaction=true -use_direct_reads=true -cache_size=268435456 -key_dist_a=0.002312 -key_dist_b=0.3467 -keyrange_dist_a=14.18 -keyrange_dist_b=-2.917 -keyrange_dist_c=0.0164 -keyrange_dist_d=-0.08082 -keyrange_num=30 -value_k=0.2615 -value_sigma=25.45 -iter_k=2.517 -iter_sigma=14.236 -mix_get_ratio=0.85 -mix_put_ratio=0.14 -mix_seek_ratio=0.01 -sine_mix_rate_interval_milliseconds=5000 -sine_a=350 -sine_b=0.0105 -sine_d=50000 --perf_level=2 -reads=1000000 -num=5000000 -key_size=48`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5953
Test Plan: run db_bench with different parameters and checked the results.
Differential Revision: D18053527
Pulled By: zhichao-cao
fbshipit-source-id: 171f8b3142bd76462f1967c58345ad7e4f84bab7
Summary:
DBImpl extends the public GetSnapshot() with GetSnapshotForWriteConflictBoundary() method that takes snapshots specially for write-write conflict checking. Compaction treats such snapshots differently to avoid GCing a value written after that, so that the write conflict remains visible even after the compaction. The patch extends stress tests with such snapshots.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5897
Differential Revision: D17937476
Pulled By: maysamyabandeh
fbshipit-source-id: bd8b0c578827990302194f63ae0181e15752951d
Summary:
According to
https://github.com/facebook/rocksdb/wiki/Rocksdb-BlockBasedTable-Format,
the block read by BlockBasedTable::ReadMetaBlock is actually the meta index
block. Therefore, it is better to rename the function to ReadMetaIndexBlock.
This PR also applies some format change to existing code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6009
Test Plan: make check
Differential Revision: D18333238
Pulled By: riversand963
fbshipit-source-id: 2c4340a29b3edba53d19c132cbfd04caf6242aed
Summary:
For MDEV-19670: MyRocks: key lookups into deleted data are very slow
BaseDeltaIterator remembers iterate_upper_bound and will not let delta_iterator_
walk above the iterate_upper_bound if base_iterator_ is not valid
anymore.
== Rationale ==
The most straightforward way would be to make the delta_iterator
(which is a rocksdb::WBWIIterator) to support iterator bounds. But
checking for bounds has an extra CPU overhead.
So we put the check into BaseDeltaIterator, and only make it when
base_iterator_ is not valid.
(note: We could take it even further, and move the check a few lines
down, and only check iterator bounds ourselves if base_iterator_ is
not valid AND delta_iterator_ hit a tombstone).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5403
Differential Revision: D15863092
Pulled By: maysamyabandeh
fbshipit-source-id: 8da458e7b9af95ff49356666f69664b4a6ccf49b
Summary:
MaxCatchupWithNewSnapshot tests that the snapshot sequence number will be larger than the max sequence number when the snapshot was taken. However since the test does not have access to the max sequence number when the snapshot was taken, it uses max sequence number after that, which could have advanced the snapshot by then, thus making the test flaky.
The fix is to compare with max sequence number before the snapshot was taken, which is a lower bound for the value when the snapshot was taken.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5850
Test Plan: ~/gtest-parallel/gtest-parallel --repeat=12800 ./write_prepared_transaction_test --gtest_filter="*MaxCatchupWithNewSnapshot*"
Differential Revision: D17608926
Pulled By: maysamyabandeh
fbshipit-source-id: b122ae5a27f982b290bd60da852e28d3c5eb0136
Summary:
We recently added periodic compaction to universal compaction. An old assertion that we can't onlyl compact the last sorted run triggered. However, with periodic compaction, it is possible that we only compact the last sorted run, so the assertion now became stricter than needed. Relaxing this assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6000
Test Plan: This should be a low risk change. Will observe whether stress test will pass after it.
Differential Revision: D18285396
fbshipit-source-id: 9a6863debdf104c40a7f6c46ab62d84cdf5d8592
Summary:
This reverts commit 351e25401b.
All branches have been fixed to buildable on FB environments, so we can revert it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5999
Differential Revision: D18281947
fbshipit-source-id: 6deaaf1b5df2349eee5d6ed9b91208cd7e23ec8e
Summary:
FlushJobInfo and CompactionJobInfo are aggregates; we should use the
aggregate initialization syntax to ensure members (specifically those of
built-in types) are value-initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5997
Test Plan: make check
Differential Revision: D18273398
Pulled By: ltamasi
fbshipit-source-id: 35b1a63ad9ca01605d288329858af72fffd7f392
Summary:
A recent commit make periodic compaction option valid in FIFO, which means TTL. But we fail to disable it in crash test, causing assert failure. Fix it by having it disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5993
Test Plan: Restart "make crash_test" many times and make sure --periodic_compaction_seconds=0 is always the case when --compaction_style=2
Differential Revision: D18263223
fbshipit-source-id: c91a802017d83ae89ac43827d1b0012861933814
Summary:
For upcoming new SST filter implementations, we will use a new
64-bit hash function (XXH3 preview, slightly modified). This change
updates hash.{h,cc} for that change, adds unit tests, and out-of-lines
the implementations to keep hash.h as clean/small as possible.
In developing the unit tests, I discovered that the XXH3 preview always
returns zero for the empty string. Zero is problematic for some
algorithms (including an upcoming SST filter implementation) if it
occurs more often than at the "natural" rate, so it should not be
returned from trivial values using trivial seeds. I modified our fork
of XXH3 to return a modest hash of the seed for the empty string.
With hash function details out-of-lines in hash.h, it makes sense to
enable XXH_INLINE_ALL, so that direct calls to XXH64/XXH32/XXH3p
are inlined. To fix array-bounds warnings on some inline calls, I
injected some casts to uintptr_t in xxhash.cc. (Issue reported to Yann.)
Revised: Reverted using XXH_INLINE_ALL for now. Some Facebook
checks are unhappy about #include on xxhash.cc file. I would
fix that by rename to xxhash_cc.h, but to best preserve history I want
to do that in a separate commit (PR) from the uintptr casts.
Also updated filter_bench for this change, improving the performance
predictability of dry run hashing and adding support for 64-bit hash
(for upcoming new SST filter implementations, minor dead code in the
tool for now).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5984
Differential Revision: D18246567
Pulled By: pdillinger
fbshipit-source-id: 6162fbf6381d63c8cc611dd7ec70e1ddc883fbb8
Summary:
This change sets up for alternate implementations underlying
BloomFilterPolicy:
* Refactor BloomFilterPolicy and expose in internal .h file so that it's easy to iterate over / select implementations for testing, regardless of what the best public interface will look like. Most notably updated db_bloom_filter_test to use this.
* Hide FullFilterBitsBuilder from unit tests (alternate derived classes planned); expose the part important for testing (CalculateSpace), as abstract class BuiltinFilterBitsBuilder. (Also cleaned up internally exposed interface to CalculateSpace.)
* Rename BloomTest -> BlockBasedBloomTest for clarity (despite ongoing confusion between block-based table and block-based filter)
* Assert that block-based filter construction interface is only used on BloomFilterPolicy appropriately constructed. (A couple of tests updated to add ", true".)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5967
Test Plan: make check
Differential Revision: D18138704
Pulled By: pdillinger
fbshipit-source-id: 55ef9273423b0696309e251f50b8c1b5e9ec7597
Summary:
We have updated earlier release branches going back to 5.5 so they are
built using gcc7 by default. Disabling ancient versions before that
until we figure out a plan for them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5990
Test Plan: Ran the script locally.
Differential Revision: D18252386
Pulled By: ltamasi
fbshipit-source-id: a7bbb30dc52ff2eaaf31a29ecc79f7cf4e2834dc
Summary:
Previously, periodic compaction is not supported in universal compaction. Add the support using following approach: if any file is marked as qualified for periodid compaction, trigger a full compaction. If a full compaction is prevented by files being compacted, try to compact the higher levels than files currently being compacted. If in this way we can only compact the last sorted run and none of the file to be compacted qualifies for periodic compaction, skip the compact. This is to prevent the same single level compaction from being executed again and again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5970
Test Plan: Add several test cases.
Differential Revision: D18147097
fbshipit-source-id: 8ecc308154d9aca96fb192c51fbceba3947550c1
Summary:
Right now, by default FIFO compaction has no TTL. We believe that a default TTL of 30 days will be better. With this patch, the default will be changed to 30 days. Default of Options.periodic_compaction_seconds will mean the same as options.ttl. If Options.ttl and Options.periodic_compaction_seconds left default, a default 30 days TTL will be used. If both options are set, the stricter value of the two will be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5987
Test Plan: Add an option sanitize test to cover the case.
Differential Revision: D18237935
fbshipit-source-id: a6dcea1f36c3849e13c0a69e413d73ad8eab58c9
Summary:
Compaction iterator has many assert statements that are active only during test runs. Some rare bugs would show up only at runtime could violate the assert condition but go unnoticed since assert statements are not compiled in release mode. Turning the assert statements to runtime check sone pors and cons:
Pros:
- A bug that would result into incorrect data would be detected early before the incorrect data is written to the disk.
Cons:
- Runtime overhead: which should be negligible since compaction cpu is the minority in the overall cpu usage
- The assert statements might already being violated at runtime, and turning them to runtime failure might result into reliability issues.
The patch takes a conservative step in this direction by logging the assert violations at runtime. If we see any violation reported in logs, we investigate. Otherwise, we can go ahead turning them to runtime error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5935
Differential Revision: D18229697
Pulled By: maysamyabandeh
fbshipit-source-id: f1890eca80ccd7cca29737f1825badb9aa8038a8
Summary:
Recently, pipelined write is enabled even if atomic flush is enabled, which causing sanitizing failure in db_stress. Revert this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5986
Test Plan: Run "make crash_test_with_atomic_flush" and see it to run for some while so that the old sanitizing error (which showed up quickly) doesn't show up.
Differential Revision: D18228278
fbshipit-source-id: 27fdf2f8e3e77068c9725a838b9bef4ab25a2553
Summary:
More release branches are created. We should include them in continuous format compatibility checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5985
Test Plan: Let's see whether it is passes.
Differential Revision: D18226532
fbshipit-source-id: 75d8cad5b03ccea4ce16f00cea1f8b7893b0c0c8
Summary:
In pipeline writing mode, memtable switching needs to wait for memtable writing to finish to make sure that when memtables are made immutable, inserts are not going to them. This is currently done in DBImpl::SwitchMemtable(). This is done after flush_scheduler_.TakeNextColumnFamily() is called to fetch the list of column families to switch. The function flush_scheduler_.TakeNextColumnFamily() itself, however, is not thread-safe when being called together with flush_scheduler_.ScheduleFlush().
This change provides a fix, which moves the waiting logic before flush_scheduler_.TakeNextColumnFamily(). WaitForPendingWrites() is a natural place where the logic can happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5716
Test Plan: Run all tests with ASAN and TSAN.
Differential Revision: D18217658
fbshipit-source-id: b9c5e765c9989645bf10afda7c5c726c3f82f6c3
Summary:
Right now, in db_stress's iterator tests, we always use the same CF to validate iterator results. This commit changes it so that a randomized CF is used in Cf consistency test, where every CF should have exactly the same data. This would help catch more bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5983
Test Plan: Run "make crash_test_with_atomic_flush".
Differential Revision: D18217643
fbshipit-source-id: 3ac998852a0378bb59790b20c5f236f6a5d681fe
Summary:
- Periodic compactions are auto-enabled if a compaction filter or a compaction filter factory is set, in Level Compaction.
- The default value of `periodic_compaction_seconds` is changed to UINT64_MAX, which lets RocksDB auto-tune periodic compactions as needed. An explicit value of 0 will still work as before ie. to disable periodic compactions completely. For now, on seeing a compaction filter along with a UINT64_MAX value for `periodic_compaction_seconds`, RocksDB will make SST files older than 30 days to go through periodic copmactions.
Some RocksDB users make use of compaction filters to control when their data can be deleted, usually with a custom TTL logic. But it is occasionally possible that the compactions get delayed by considerable time due to factors like low writes to a key range, data reaching bottom level, etc before the TTL expiry. Periodic Compactions feature was originally built to help such cases. Now periodic compactions are auto enabled by default when compaction filters or compaction filter factories are used, as it is generally helpful to all cases to collect garbage.
`periodic_compaction_seconds` is set to a large value, 30 days, in `SanitizeOptions` when RocksDB sees that a `compaction_filter` or `compaction_filter_factory` is used.
This is done only for Level Compaction style.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5865
Test Plan:
- Added a new test `DBCompactionTest.LevelPeriodicCompactionWithCompactionFilters` to make sure that `periodic_compaction_seconds` is set if either `compaction_filter` or `compaction_filter_factory` options are set.
- `COMPILE_WITH_ASAN=1 make check`
Differential Revision: D17659180
Pulled By: sagar0
fbshipit-source-id: 4887b9cf2e53cf2dc93a7b658c6b15e1181217ee
Summary:
filter_bench is a specialized micro-benchmarking tool that
should not be needed with ROCKSDB_LITE. This should fix the LITE build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5978
Test Plan: make LITE=1 check
Differential Revision: D18177941
Pulled By: pdillinger
fbshipit-source-id: b73a171404661e09e018bc99afcf8d4bf1e2949c
Summary:
Fix for lite build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5971
Test Plan: make J=1 -j64 LITE=1 all check
Differential Revision: D18148306
Pulled By: vjnadimpalli
fbshipit-source-id: 5b9a3edc3e73e054fee6b96e6f6e583cecc898f3
Summary:
* Adds support for plain table filter. This is not critical right now, but does add a -impl flag that will be useful for new filter implementations initially targeted at block-based table (and maybe later ported to plain table)
* Better mixing of inside vs. outside queries, for more realism
* A -best_case option handy for implementation tuning inner loop
* Option for whether to include hashing time in dry run / net timings
No modifications to production code, just filter_bench.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5968
Differential Revision: D18139872
Pulled By: pdillinger
fbshipit-source-id: 5b09eba963111b48f9e0525a706e9921070990e8
Summary:
Adding a new API to db.h that allows users to get file_creation_time of the oldest file in the DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5948
Test Plan: Added unit test.
Differential Revision: D18056151
Pulled By: vjnadimpalli
fbshipit-source-id: 448ec9d34cb6772e1e5a62db399ace00dcbfbb5d
Summary:
Some filtering tests were unfriendly to new implementations of
FilterBitsBuilder because of dynamic_cast to FullFilterBitsBuilder. Most
of those have now been cleaned up, worked around, or at least changed
from crash on dynamic_cast failure to individual test failure.
Also put some clarifying comments on filter-related APIs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5960
Test Plan: make check
Differential Revision: D18121223
Pulled By: pdillinger
fbshipit-source-id: e83827d9d5d96315d96f8e25a99cd70f497d802c
Summary:
A bug occasionally shows up in crash test, and https://github.com/facebook/rocksdb/issues/5851 reproduces it.
The bug can surface in the following way.
1. Database has multiple column families.
2. Between one DB restart, the last log file is corrupted in the middle (not the tail)
3. During restart, DB crashes between flushing between two column families.
Then DB will fail to be opened again with error "SST file is ahead of WALs".
Solution is to update the log number associated with each column family altogether after flushing all column families' memtables. The version edits should be written to a new MANIFEST. Only after writing to all these version edits succeed does RocksDB (atomically) points the CURRENT file to the new MANIFEST.
Test plan (on devserver):
```
$make all && make check
```
Specifically
```
$make db_test2
$./db_test2 --gtest_filter=DBTest2.CrashInRecoveryMultipleCF
```
Also checked for compatibility as follows.
Use this branch, run DBTest2.CrashInRecoveryMultipleCF and preserve the db directory.
Then checkout 5.4, build ldb, and dump the MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5856
Differential Revision: D17620818
Pulled By: riversand963
fbshipit-source-id: b52ce5969c9a8052cacec2bd805fcfb373589039
Summary:
- Updated our included xxhash implementation to version 0.7.2 (== the latest dev version as of 2019-10-09).
- Using XXH_NAMESPACE (like other fb projects) to avoid potential name collisions.
- Added fastrange64, and unit tests for it and fastrange32. These are faster alternatives to hash % range.
- Use preview version of XXH3 instead of MurmurHash64A for NPHash64
-- Had to update cache_test to increase probability of passing for any given hash function.
- Use fastrange64 instead of % with uses of NPHash64
-- Had to fix WritePreparedTransactionTest.CommitOfDelayedPrepared to avoid deadlock apparently caused by new hash collision.
- Set default seed for NPHash64 because specifying a seed rarely makes sense for it.
- Removed unnecessary include xxhash.h in a popular .h file
- Rename preview version of XXH3 to XXH3p for clarity and to ease backward compatibility in case final version of XXH3 is integrated.
Relying on existing unit tests for NPHash64-related changes. Each new implementation of fastrange64 passed unit tests when manipulating my local build to select it. I haven't done any integration performance tests, but I consider the improved performance of the pieces being swapped in to be well established.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5909
Differential Revision: D18125196
Pulled By: pdillinger
fbshipit-source-id: f6bf83d49d20cbb2549926adf454fd035f0ecc0d
Summary:
The parts that are used to implement FilterPolicy /
NewBloomFilterPolicy and not used other than for the block-based table
should be consolidated under table/block_based/filter_policy*.
This change is step 2 of 2:
mv util/bloom.cc table/block_based/filter_policy.cc
This gets its own PR so that git has the best chance of following the
rename for blame purposes. Note that low-level shared implementation
details of Bloom filters remain in util/bloom_impl.h, and
util/bloom_test.cc remains where it is for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5966
Test Plan: make check
Differential Revision: D18124930
Pulled By: pdillinger
fbshipit-source-id: 823bc09025b3395f092ef46a46aa5ba92a914d84
Summary:
This patch adds a number of new information elements to the FlushJobInfo and
CompactionJobInfo structures that are passed to EventListeners via the
OnFlush{Begin, Completed} and OnCompaction{Begin, Completed} callbacks.
Namely, for flushes, the file numbers of the new SST and the oldest blob file it
references are propagated. For compactions, the new pieces of information are
the file number, level, and the oldest blob file referenced by each compaction
input and output file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5962
Test Plan:
Extended the EventListener unit tests with logic that checks that these information
elements are correctly propagated from the corresponding FileMetaData.
Differential Revision: D18095568
Pulled By: ltamasi
fbshipit-source-id: 6874359a6aadb53366b5fe87adcb2f9bd27a0a56
Summary:
The parts that are used to implement FilterPolicy /
NewBloomFilterPolicy and not used other than for the block-based table
should be consolidated under table/block_based/filter_policy*. I don't
foresee sharing these APIs with e.g. the Plain Table because they don't
expose hashes for reuse in indexing.
This change is step 1 of 2:
(a) mv table/full_filter_bits_builder.h to
table/block_based/filter_policy_internal.h which I expect to expand
soon to internally reveal more implementation details for testing.
(b) consolidate eventual contents of table/block_based/filter_policy.cc
in util/bloom.cc, which has the most elaborate revision history
(see step 2 ...)
Step 2 soon to follow:
mv util/bloom.cc table/block_based/filter_policy.cc
This gets its own PR so that git has the best chance of following the
rename for blame purposes. Note that low-level shared implementation
details of Bloom filters are in util/bloom_impl.h.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5963
Test Plan: make check
Differential Revision: D18121199
Pulled By: pdillinger
fbshipit-source-id: 8f21732c3d8909777e3240e4ac3123d73140326a
Summary:
The first version of filter_bench has selectable key size
but that size does not vary throughout a test run. This artificially
favors "branchy" hash functions like the existing BloomHash,
MurmurHash1, probably because of optimal return for branch prediction.
This change primarily varies those key sizes from -2 to +2 bytes vs.
the average selected size. We also set the default key size at 24 to
better reflect our best guess of typical key size.
But steadily random key sizes may not be realistic either. So this
change introduces a new filter_bench option:
-vary_key_size_log2_interval=n where the same key size is used 2^n
times and then changes to another size. I've set the default at 5
(32 times same size) as a compromise between deployments with
rather consistent vs. rather variable key sizes. On my Skylake
system, the performance boost to MurmurHash1 largely lies between
n=10 and n=15.
Also added -vary_key_alignment (bool, now default=true), though this
doesn't currently seem to matter in hash functions under
consideration.
This change also does a "dry run" for each testing scenario, to improve
the accuracy of those numbers, as there was more difference between
scenarios than expected. Subtracting gross test run times from dry run
times is now also embedded in the output, because these "net" times are
generally the most useful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5933
Differential Revision: D18121683
Pulled By: pdillinger
fbshipit-source-id: 3c7efee1c5661a5fe43de555e786754ddf80dc1e
Summary:
For more information on the original problem see this [link](https://github.com/facebook/rocksdb/issues/3977).
This change adds two new tests. They are identical other than one uses range tombstones and the other does not. Each test generates sub files at L2 which overlap with keys L3. The test that uses range tombstones generates a single file at L2. This single file will generate a very large range overlap that will in turn create excessively large compaction.
1: T001 - T005
2: 000 - 005
In contrast, the test that uses key ranges generates 3 files at L2. As a single file is compacted at a time, those 3 files will generate less work per compaction iteration.
1: 001 - 002
1: 003 - 004
1: 005
2: 000 - 005
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5956
Differential Revision: D18071631
Pulled By: dlambrig
fbshipit-source-id: 12abae75fb3e0b022d228c6371698aa5e53385df
Summary:
Right now in CF consitency stres test's TestGet(), keys are just fetched without validation. With this change, in 1/2 the time, compare all the CFs share the same value with the same key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5863
Test Plan: Run "make crash_test_with_atomic_flush" and see tests pass. Hack the code to generate some inconsistency and observe the test fails as expected.
Differential Revision: D17934206
fbshipit-source-id: 00ba1a130391f28785737b677f80f366fb83cced
Summary:
This is an internal, file-local "feature" that is not used and
potentially confusing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5961
Test Plan: make check
Differential Revision: D18099018
Pulled By: pdillinger
fbshipit-source-id: 7870627eeed09941d12538ec55d10d2e164fc716
Summary:
In the previous PR https://github.com/facebook/rocksdb/issues/5934 , in the while loop, if/else if is used without ending with else to free the object referenced by ra, it might cause potential memory leak (warning during compiling). Fix it by changing the last "else if" to "else".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5955
Test Plan: pass make asan check, pass the USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j64 analyze.
Differential Revision: D18071612
Pulled By: zhichao-cao
fbshipit-source-id: 51c00023d0c97c2921507254329aed55d56e1786
Summary:
Since we already parse env_uri from command line and creates custom Env
accordingly, we should invoke the methods of such Envs instead of using
Env::Default().
Test Plan (on devserver):
```
$make db_bench db_stress
$./db_bench -benchmarks=fillseq
./db_stress
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5943
Differential Revision: D18018550
Pulled By: riversand963
fbshipit-source-id: 03b61329aaae0dfd914a0b902cc677f570f102e3
Summary:
include db_stress_tool in rocksdb tools lib
Test Plan (on devserver):
```
$make db_stress
$./db_stress
$make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5950
Differential Revision: D18044399
Pulled By: riversand963
fbshipit-source-id: 895585abbbdfd8b954965921dba4b1400b7af1b1
Summary:
Several error paths in opening of a plain table would leak memory. PR https://github.com/facebook/rocksdb/issues/5940 opened the leak to one more error path, which happens to have been (mistakenly) exercised by CuckooTableDBTest.AdaptiveTable. That test has been fixed, and the exercising of
plain table error cases (more than before) has been added as BadOptions1 and BadOptions2
to PlainTableDBTest. This effectively moved the memory leak to plain_table_db_test.
Also here is a cheap fix for the memory leak, without (yet?) changing the signature of
ReadTableProperties. This fixes ASAN on unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5951
Test Plan: make COMPILE_WITH_ASAN=1 check
Differential Revision: D18051940
Pulled By: pdillinger
fbshipit-source-id: e2952930c09a2b46c4f1ff09818c5090426929de
Summary:
The pointer ra needs to be freed the status s returns not OK. In the previous PR https://github.com/facebook/rocksdb/issues/5934 , the ra is not freed which might cause potential memory leak. Fix this issue by moving the clarification of ra inside the while loop and freeing it as desired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5949
Test Plan: pass make asan check.
Differential Revision: D18045726
Pulled By: zhichao-cao
fbshipit-source-id: d5445b7b832c8bb1dafe008bafea7bfe9eb0b1ce
Summary:
Right now, when LevelIterator::Seek() is called, when a file is filtered out by prefix bloom filter, the position is put to the beginning of the next file. This is a confusing internal interface because many keys in the levels are skipped. Avoid this behavior by checking the key of the next file against the seek key, and invalidate the whole iterator if the prefix doesn't match.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5861
Test Plan: Add a new unit test to validate the behavior; run all exsiting tests; run crash_test
Differential Revision: D17918213
fbshipit-source-id: f06b47d937c7cc8919001f18dcc3af5b28c9cdac
Summary:
A recent change introduced readahead inside VerifyChecksum(). However it is not compatible with mmap mode and generated wrong checksum verification failure. Fix it by not enabling readahead in mmap
mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5945
Test Plan: Add a unit test that used to fail.
Differential Revision: D18021443
fbshipit-source-id: 6f2eb600f81b26edb02222563a4006869d576bff
Summary:
Some dependency path is not correct so that ASAN cannot run with CLANG. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5946
Test Plan: Run ASAN with CLANG
Differential Revision: D18040933
fbshipit-source-id: 1d82be9d350485cf1df1c792dad765188958641f
Summary:
Amongst other things, PR https://github.com/facebook/rocksdb/issues/5504 refactored the filter block readers so that
only the filter block contents are stored in the block cache (as opposed to the
earlier design where the cache stored the filter block reader itself, leading to
potentially dangling pointers and concurrency bugs). However, this change
introduced a performance hit since with the new code, the metadata fields are
re-parsed upon every access. This patch reunites the block contents with the
filter bits reader to eliminate this overhead; since this is still a self-contained
pure data object, it is safe to store it in the cache. (Note: this is similar to how
the zstd digest is handled.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5936
Test Plan:
make asan_check
filter_bench results for the old code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.7153
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.4258
Single filter ns/op: 42.5974
Random filter ns/op: 217.861
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.4217
Single filter ns/op: 50.9855
Random filter ns/op: 219.167
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5172
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 32.3556
Single filter ns/op: 83.2239
Random filter ns/op: 370.676
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.2265
Single filter ns/op: 93.5651
Random filter ns/op: 408.393
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
With the new code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 25.4285
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 31.0594
Single filter ns/op: 43.8974
Random filter ns/op: 226.075
----------------------------
Outside queries...
Dry run (25d) ns/op: 31.0295
Single filter ns/op: 50.3824
Random filter ns/op: 226.805
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5308
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.2968
Single filter ns/op: 58.6163
Random filter ns/op: 291.434
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.1839
Single filter ns/op: 66.9039
Random filter ns/op: 292.828
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
Differential Revision: D17991712
Pulled By: ltamasi
fbshipit-source-id: 7ea205550217bfaaa1d5158ebd658e5832e60f29
Summary:
Since SeekForPrev (used by Prev) is not supported by HashSkipList when prefix is used, we disable it when stress testing HashSkipList.
- Change the default memtablerep to skip list.
- Avoid Prev() when memtablerep is HashSkipList and prefix is used.
Test Plan (on devserver):
```
$make db_stress
$./db_stress -ops_per_thread=10000 -reopen=1 -destroy_db_initially=true -column_families=1 -threads=1 -column_families=1 -memtablerep=prefix_hash
$# or simply
$./db_stress
$./db_stress -memtablerep=prefix_hash
```
Results must print "Verification successful".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5942
Differential Revision: D18017062
Pulled By: riversand963
fbshipit-source-id: af867e59aa9e6f533143c984d7d529febf232fd7
Summary:
FullFilterBitsReader, after creating in BloomFilterPolicy, was
responsible for decoding metadata bits. This meant that
FullFilterBitsReader::MayMatch had some metadata checks in order to
implement "always true" or "always false" functionality in the case
of inconsistent or trivial metadata. This made for ugly
mixing-of-concerns code and probably had some runtime cost. It also
didn't really support plugging in alternative filter implementations
with extensions to the existing metadata schema.
BloomFilterPolicy::GetFilterBitsReader is now (exclusively) responsible
for decoding filter metadata bits and constructing appropriate instances
deriving from FilterBitsReader. "Always false" and "always true" derived
classes allow FullFilterBitsReader not to be concerned with handling of
trivial or inconsistent metadata. This also makes for easy expansion
to alternative filter implementations in new, alternative derived
classes. This change makes calls to FilterBitsReader::MayMatch
*necessarily* virtual because there's now more than one built-in
implementation. Compared with the previous implementation's extra
'if' checks in MayMatch, there's no consistent performance difference,
measured by (an older revision of) filter_bench (differences here seem
to be within noise):
Inside queries...
- Dry run (407) ns/op: 35.9996
+ Dry run (407) ns/op: 35.2034
- Single filter ns/op: 47.5483
+ Single filter ns/op: 47.4034
- Batched, prepared ns/op: 43.1559
+ Batched, prepared ns/op: 42.2923
...
- Random filter ns/op: 150.697
+ Random filter ns/op: 149.403
----------------------------
Outside queries...
- Dry run (980) ns/op: 34.6114
+ Dry run (980) ns/op: 34.0405
- Single filter ns/op: 56.8326
+ Single filter ns/op: 55.8414
- Batched, prepared ns/op: 48.2346
+ Batched, prepared ns/op: 47.5667
- Random filter ns/op: 155.377
+ Random filter ns/op: 153.942
Average FP rate %: 1.1386
Also, the FullFilterBitsReader ctor was responsible for a surprising
amount of CPU in production, due in part to inefficient determination of
the CACHE_LINE_SIZE used to construct the filter being read. The
overwhelming common case (same as my CACHE_LINE_SIZE) is now
substantially optimized, as shown with filter_bench with
-new_reader_every=1 (old option - see below) (repeatable result):
Inside queries...
- Dry run (453) ns/op: 118.799
+ Dry run (453) ns/op: 105.869
- Single filter ns/op: 82.5831
+ Single filter ns/op: 74.2509
...
- Random filter ns/op: 224.936
+ Random filter ns/op: 194.833
----------------------------
Outside queries...
- Dry run (aa1) ns/op: 118.503
+ Dry run (aa1) ns/op: 104.925
- Single filter ns/op: 90.3023
+ Single filter ns/op: 83.425
...
- Random filter ns/op: 220.455
+ Random filter ns/op: 175.7
Average FP rate %: 1.13886
However PR#5936 has/will reclaim most of this cost. After that PR, the optimization of this code path is likely negligible, but nonetheless it's clear we aren't making performance any worse.
Also fixed inadequate check of consistency between filter data size and
num_lines. (Unit test updated.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5941
Test Plan:
previously added unit tests FullBloomTest.CorruptFilters and
FullBloomTest.RawSchema
Differential Revision: D18018353
Pulled By: pdillinger
fbshipit-source-id: 8e04c2b4a7d93223f49a237fd52ef2483929ed9c
Summary:
Plain table SSTs could crash sst_dump because of a bug in
PlainTableReader that can leave table_properties_ as null. Even if it
was intended not to keep the table properties in some cases, they were
leaked on the offending code path.
Steps to reproduce:
$ db_bench --benchmarks=fillrandom --num=2000000 --use_plain_table --prefix-size=12
$ sst_dump --file=0000xx.sst --show_properties
from [] to []
Process /dev/shm/dbbench/000014.sst
Sst file format: plain table
Raw user collected properties
------------------------------
Segmentation fault (core dumped)
Also added missing unit testing of plain table full_scan_mode, and
an assertion in NewIterator to check for regression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5940
Test Plan: new unit test, manual, make check
Differential Revision: D18018145
Pulled By: pdillinger
fbshipit-source-id: 4310c755e824c4cd6f3f86a3abc20dfa417c5e07
Summary:
In the current trace replay, all the queries are serialized and called by single threads. It may not simulate the original application query situations closely. The multi-threads replay is implemented in this PR. Users can set the number of threads to replay the trace. The queries generated according to the trace records are scheduled in the thread pool job queue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5934
Test Plan: test with make check and real trace replay.
Differential Revision: D17998098
Pulled By: zhichao-cao
fbshipit-source-id: 87eecf6f7c17a9dc9d7ab29dd2af74f6f60212c8
Summary:
expose db stress test by providing db_stress_tool.h in public header.
This PR does the following:
- adds a new header, db_stress_tool.h, in include/rocksdb/
- renames db_stress.cc to db_stress_tool.cc
- adds a db_stress.cc which simply invokes a test function.
- update Makefile accordingly.
Test Plan (dev server):
```
make db_stress
./db_stress
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5937
Differential Revision: D17997647
Pulled By: riversand963
fbshipit-source-id: 1a8d9994f89ce198935566756947c518f0052410
Summary:
The patch adds a new command line parameter --decode_blob_index to sst_dump.
If this switch is specified, sst_dump prints blob indexes in a human readable format,
printing the blob file number, offset, size, and expiration (if applicable) for blob
references, and the blob value (and expiration) for inlined blobs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5926
Test Plan:
Used db_bench's BlobDB mode to generate SST files containing blob references with
and without expiration, as well as inlined blobs with and without expiration (note: the
latter are stored as plain values), and confirmed sst_dump correctly prints all four types
of records.
Differential Revision: D17939077
Pulled By: ltamasi
fbshipit-source-id: edc5f58fee94ba35f6699c6a042d5758f5b3963d
Summary:
When there are concurrent flush job on the same CF, `OnFlushCompleted` can be called before the flush result being install to LSM. Fixing the issue by passing `FlushJobInfo` through `MemTable`, and the thread who commit the flush result can fetch the `FlushJobInfo` and fire `OnFlushCompleted` on behave of the thread actually writing the SST.
Fix https://github.com/facebook/rocksdb/issues/5892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5908
Test Plan: Add new test. The test will fail without the fix.
Differential Revision: D17916144
Pulled By: riversand963
fbshipit-source-id: e18df67d9533b5baee52ae3605026cdeb05cbe10
Summary:
Without this PR, clang analyzer complains.
```
$USE_CLANG=1 make analyze
db/compaction/compaction_job_test.cc:161:20: warning: The left operand of '==' is a garbage value
if (key.type == kTypeBlobIndex) {
~~~~~~~~ ^
1 warning generated.
```
Test Plan (on devserver)
```
$USE_CLANG=1 make analyze
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5924
Differential Revision: D17923226
Pulled By: riversand963
fbshipit-source-id: 9d1eb769b5e0de7cb3d89dc90d1cfa895db7fdc8
Summary:
Currently, db_bench only supports PutWithTTL operations for BlobDB but
not regular Puts. The patch adds support for regular (non-TTL) Puts and also
changes the default for blob_db_max_ttl_range to zero, which corresponds
to no TTL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5921
Test Plan:
make check
./db_bench -benchmarks=fillrandom -statistics -stats_interval_seconds=1
-duration=90 -num=500000 -use_blob_db=1 -blob_db_file_size=1000000
-target_file_size_base=1000000 (issues Put operations with no TTL)
./db_bench -benchmarks=fillrandom -statistics -stats_interval_seconds=1
-duration=90 -num=500000 -use_blob_db=1 -blob_db_file_size=1000000
-target_file_size_base=1000000 -blob_db_max_ttl_range=86400 (issues
PutWithTTL operations with random TTLs in the [0, blob_db_max_ttl_range)
interval, as before)
Differential Revision: D17919798
Pulled By: ltamasi
fbshipit-source-id: b946c3522b836b92b4c157ffbad24f92ba2b0a16
Summary:
This is groundwork for adding garbage collection support to BlobDB. The
patch adds logic that keeps track of the oldest blob file referred to by
each SST file. The oldest blob file is identified during flush/
compaction (similarly to how the range of keys covered by the SST is
identified), and persisted in the manifest as a custom field of the new
file edit record. Blob indexes with TTL are ignored for the purposes of
identifying the oldest blob file (since such blob files are cleaned up by the
TTL logic in BlobDB).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5903
Test Plan:
Added new unit tests; also ran db_bench in BlobDB mode, inspected the
manifest using ldb, and confirmed (by scanning the SST files using
sst_dump) that the value of the oldest blob file number field matches
the contents of the file for each SST.
Differential Revision: D17859997
Pulled By: ltamasi
fbshipit-source-id: 21662c137c6259a6af70446faaf3a9912c550e90
Summary:
Compaction can call OnTableFileCreationCompleted(). If file is empty, "(nil)"
is used as the file name.
Do the same for flush.
Test plan (dev server):
```
make all
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5905
Differential Revision: D17883285
Pulled By: riversand963
fbshipit-source-id: 6565884adbb00e8023d88b17dfb3b6eb92220b59
Summary:
Partition Filters make use of a top-level index to find the partition that might have the bloom hash of the key. The index is with internal key format (before format version 3). Each partition contains the i) blooms of the keys in that range ii) bloom of prefixes of keys in that range, iii) the bloom of the prefix of the last key in the previous partition.
When ::SeekForPrev(key), we first perform a prefix bloom test on the SST file. The partition however is identified using the full internal key, rather than the prefix key. The reason is to be compatible with the internal key format of the top-level index. This creates a corner case. Example:
- SST k, Partition N: P1K1, P1K2
- SST k, top-level index: P1K2
- SST k+1, Partition 1: P2K1, P3K1
- SST k+1 top-level index: P3K1
When SeekForPrev(P1K3), it should point us to P1K2. However SST k top-level index would reject P1K3 since it is out of range.
One possible fix would be to search with the prefix P1 (instead of full internal key P1K3) however the details of properly comparing prefix with full internal key might get complicated. The fix we apply in this PR is to look into the last partition anyway even if the key is out of range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5907
Differential Revision: D17889918
Pulled By: maysamyabandeh
fbshipit-source-id: 169fd7b3c71dbc08808eae5a8340611ebe5bdc1e
Summary:
Since we do not evict a file's blocks from block cache before that file
is deleted, we require a file's cache ID prefix is both unique and
non-reusable. However, the Windows functionality we were relying on only
guaranteed uniqueness. That meant a newly created file could be assigned
the same cache ID prefix as a deleted file. If the newly created file
had block offsets matching the deleted file, full cache keys could be
exactly the same, resulting in obsolete data blocks returned from cache
when trying to read from the new file.
We noticed this when running on FAT32 where compaction was writing out
of order keys due to reading obsolete blocks from its input files. The
functionality is documented as behaving the same on NTFS, although I
wasn't able to repro it there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5844
Test Plan:
we had a reliable repro of out-of-order keys on FAT32 that
was fixed by this change
Differential Revision: D17752442
fbshipit-source-id: 95d983f9196cf415f269e19293b97341edbf7e00
Summary:
RocksDB has a MultiGet() API that implements batched key lookup for higher performance (https://github.com/facebook/rocksdb/blob/master/include/rocksdb/db.h#L468). Currently, batching is implemented in BlockBasedTableReader::MultiGet() for SST file lookups. One of the ways it improves performance is by pipelining bloom filter lookups (by prefetching required cachelines for all the keys in the batch, and then doing the probe) and thus hiding the cache miss latency. The same concept can be extended to the memtable as well. This PR involves implementing a pipelined bloom filter lookup in DynamicBloom, and implementing MemTable::MultiGet() that can leverage it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5818
Test Plan:
Existing tests
Performance Test:
Ran the below command which fills up the memtable and makes sure there are no flushes and then call multiget. Ran it on master and on the new change and see atleast 1% performance improvement across all the test runs I did. Sometimes the improvement was upto 5%.
TEST_TMPDIR=/data/users/$USER/benchmarks/feature/ numactl -C 10 ./db_bench -benchmarks="fillseq,multireadrandom" -num=600000 -compression_type="none" -level_compaction_dynamic_level_bytes -write_buffer_size=200000000 -target_file_size_base=200000000 -max_bytes_for_level_base=16777216 -reads=90000 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4 -statistics -memtable_whole_key_filtering=true -memtable_bloom_size_ratio=10
Differential Revision: D17578869
Pulled By: vjnadimpalli
fbshipit-source-id: 23dc651d9bf49db11d22375bf435708875a1f192
Summary:
The loop in OperateDb() is getting quite complicated with the introduction of multiple key operations such as MultiGet and Reseeks. This is resulting in a number of corner cases that hangs db_stress due to synchronization problems during reopen (i.e when -reopen=<> option is specified). This PR makes it more robust by ensuring all db_stress threads vote to reopen the DB the exact same number of times.
Most of the changes in this diff are due to indentation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5893
Test Plan: Run crash test
Differential Revision: D17823827
Pulled By: anand1976
fbshipit-source-id: ec893829f611ac7cac4057c0d3d99f9ffb6a6dd9
Summary:
Fixed some spots where converting size_t or uint_fast32_t to
uint32_t. Wrapped mt19937 in a new Random32 class to avoid future
such traps.
NB: I tried using Random32::Uniform (std::uniform_int_distribution) in
filter_bench instead of fastrange, but that more than doubled the dry
run time! So I added fastrange as Random32::Uniformish. ;)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5894
Test Plan: USE_CLANG=1 build, and manual re-run filter_bench
Differential Revision: D17825131
Pulled By: pdillinger
fbshipit-source-id: 68feee333b5f8193c084ded760e3d6679b405ecd
Summary:
This PR allows for the creation of custom env when using sst_dump. If
the user does not set options.env or set options.env to nullptr, then sst_dump
will automatically try to create a custom env depending on the path to the sst
file or db directory. In order to use this feature, the user must call
ObjectRegistry::Register() beforehand.
Test Plan (on devserver):
```
$make all && make check
```
All tests must pass to ensure this change does not break anything.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5845
Differential Revision: D17678038
Pulled By: riversand963
fbshipit-source-id: 58ecb4b3f75246d52b07c4c924a63ee61c1ee626
Summary:
This is the 2nd attempt after the revert of https://github.com/facebook/rocksdb/pull/4020
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5895
Test Plan:
```
./tools/db_crashtest.py blackbox --simple --interval=10 --max_key=10000000
```
Differential Revision: D17822137
Pulled By: maysamyabandeh
fbshipit-source-id: 3d148c0d8cc129080410ff859c04b544223c8ea3
Summary:
Example: using the tool before and after PR https://github.com/facebook/rocksdb/issues/5784 shows that
the refactoring, presumed performance-neutral, actually sped up SST
filters by about 3% to 8% (repeatable result):
Before:
- Dry run ns/op: 22.4725
- Single filter ns/op: 51.1078
- Random filter ns/op: 120.133
After:
+ Dry run ns/op: 22.2301
+ Single filter run ns/op: 47.4313
+ Random filter ns/op: 115.9
Only tests filters for the block-based table (full filters and
partitioned filters - same implementation; not block-based filters),
which seems to be the recommended format/implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5825
Differential Revision: D17804987
Pulled By: pdillinger
fbshipit-source-id: 0f18a9c254c57f7866030d03e7fa4ba503bac3c5
Summary:
Instead of hard coding Env::Default in TestEnv and a few other places, use the
DBTestBase::env_ that has been deduced from the constructor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5886
Test Plan:
```
make check
```
Differential Revision: D17773029
Pulled By: riversand963
fbshipit-source-id: 7ce4e5175a487e9d281ea2c3aae3c41bffd44629
Summary:
This PR eliminates repeated lookups in associative or ordered containers when a single lookup suffices.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5875
Differential Revision: D17753172
Pulled By: anand1976
fbshipit-source-id: 796b02b760082521d8c42a1cb65a76bf0e6c1b8e
Summary:
When an iterator reseek happens with the user specifying a new iterate_upper_bound in ReadOptions, and the new seek position is at the end of the same data block, the Seek() ends up using a stale value of data_block_within_upper_bound_ and may return incorrect results.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5883
Test Plan: Added a new test case DBIteratorTest.IterReseekNewUpperBound. Verified that it failed due to the assertion failure without the fix, and passes with the fix.
Differential Revision: D17752740
Pulled By: anand1976
fbshipit-source-id: f9b635ff5d6aeb0e1bef102cf8b2f900efd378e3
Summary:
Broken type for shift in PR#5834. Fixing code means fixing
expected values in test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5882
Test Plan: thisisthetest
Differential Revision: D17746136
Pulled By: pdillinger
fbshipit-source-id: d3c456ed30b433d55fcab6fc7d836940fe3b46b8
Summary:
When multiple operations are performed in a db_stress thread in one loop
iteration, the reopen voting logic needs to take that into account. It
was doing that for MultiGet, but a new option was introduced recently to
do multiple iterator seeks per iteration, which broke it again. Fix the
logic to be more robust and agnostic of the type of operation performed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5876
Test Plan: Run db_stress
Differential Revision: D17733590
Pulled By: anand1976
fbshipit-source-id: 787f01abefa1e83bba43e0b4f4abb26699b2089e
Summary:
There was significant untested logic in FullFilterBitsReader in
the handling of serialized Bloom filter bits that cannot be generated by
FullFilterBitsBuilder in the current compilation. These now test many of
those corner-case behaviors, including bad metadata or filters created
with different cache line size than the current compiled-in value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5834
Test Plan: thisisthetest
Differential Revision: D17726372
Pulled By: pdillinger
fbshipit-source-id: fb7b8003b5a8e6fb4666fe95206128f3d5835fc7
Summary:
Conflict resolving in 846e05005d ("Revert "Merging iterator to avoid child iterator reseek for some cases") caused some timer misplaced. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5874
Test Plan: See it build.
Differential Revision: D17705073
fbshipit-source-id: 9bd3a8dc4901ac33c2c6fc5b1091ffbc56a8529f
Summary:
Without this fix, compiler complains.
```
$ROCKSDB_NO_FBCODE=1 USE_CLANG=1 make ldb
table/block_based/full_filter_block.cc: In constructor ‘rocksdb::FullFilterBlockBuilder::FullFilterBlockBuilder(const rocksdb::SliceTransform*, bool, rocksdb::FilterBitsBuilder*)’:
table/block_based/full_filter_block.cc:20:43: error: declaration of ‘prefix_extractor’ shadows a member of 'this' [-Werror=shadow]
FilterBitsBuilder* filter_bits_builder)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5872
Test Plan:
```
$ROCKSDB_NO_FBCODE=1 make all
```
Differential Revision: D17690058
Pulled By: riversand963
fbshipit-source-id: 19e3d9bd86e1123847095240e73d30da5d66240e
Summary:
This reverts commit 9fad3e21eb.
Iterator verification in stress tests sometimes fail for assertion
table/block_based/block_based_table_reader.cc:2973: void rocksdb::BlockBasedTableIterator<TBlockIter, TValue>::FindBlockForward() [with TBlockIter = rocksdb::DataBlockIter; TValue = rocksdb::Slice]: Assertion `!next_block_is_out_of_bound || user_comparator_.Compare(*read_options_.iterate_upper_bound, index_iter_->user_key()) <= 0' failed.
It is likely to be linked to https://github.com/facebook/rocksdb/pull/5286 together with https://github.com/facebook/rocksdb/pull/5468 as the former PR makes some child iterator's seek being avoided, so that upper bound condition fails to be updated there. Strictly speaking, the former PR was merged before the latter one, but the latter one feels a more important improvement so I choose to revert the former one for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5871
Differential Revision: D17689196
fbshipit-source-id: 4ded5be68f67bee2782d31a29cb72ea68f59dd8c
Summary:
Two more bug fixes in db_stress:
1. this is to complete the fix of the regression bug causing overflowing when supporting FLAGS_prefix_size = -1.
2. Fix regression bug in compare iterator itself:
(1) when creating control iterator, which used the same read option as the normal iterator by mistake; (2) the logic of comparing has some problems. Fix them.
(3) disable validation for lower bound now, which generated some wildly different results. Disabling it to make normal tests pass while investigating it.
3. Cleaning up snapshots in verification failure cases. Memory is leaked otherwise.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5867
Test Plan: Run "make crash_test" for a while and see at least 1 is fixed.
Differential Revision: D17671712
fbshipit-source-id: 011f98ea1a72aef23e19ff28656830c78699b402
Summary:
Atomic flush is incompatible with pipelined write. At least now.
If pipelined write is enabled, a thread performing write can exit the write
thread and start inserting into memtables. Consequently a thread performing
flush will enter write thread and race with memtable insertion by the former.
This will cause undefined result in terms of data persistence.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5860
Test Plan:
```
$make all && make check
```
Differential Revision: D17638944
Pulled By: riversand963
fbshipit-source-id: abc578dc49a5dbe41bc5adcecf448f8e042a6d49
Summary:
When prefix_size = -1, stress test crashes with run time error because of overflow. Fix it by not using -1 but 7 in prefix scan mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5862
Test Plan:
Run
python -u tools/db_crashtest.py --simple whitebox --random_kill_odd \
888887 --compression_type=zstd
and see it doesn't crash.
Differential Revision: D17642313
fbshipit-source-id: f029e7651498c905af1b1bee6d310ae50cdcda41
Summary:
For now, crash_test is not able to report any failure for the logic related to iterator upper, lower bounds or iterators, or reseek. These are features prone to errors. Improve db_stress in several ways:
(1) For each iterator run, reseek up to 3 times.
(2) For every iterator, create control iterator with upper or lower bound, with total order seek. Compare the results with the iterator.
(3) Make simple crash test to avoid prefix size to have more coverage.
(4) make prefix_size = 0 a valid size and -1 to indicate disabling prefix extractor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5846
Test Plan: Manually hack the code to create wrong results and see they are caught by the tool.
Differential Revision: D17631760
fbshipit-source-id: acd460a177bd2124a5ffd7fff490702dba63030b
Summary:
Add unordered_write option api and related ut to rocksjava
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5839
Differential Revision: D17604446
Pulled By: maysamyabandeh
fbshipit-source-id: c6b07e85ca9d5e3a92973ddb6ab2bc079e53c9c1
Summary:
as title.
Test Plan (on devserver):
```
$make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5855
Differential Revision: D17615125
Pulled By: riversand963
fbshipit-source-id: bd6ed8cf59eafff41f0d1fc044f39e8f3573172a
Summary:
This is a bug occaionally shows up in crash test, and this unit test is to reproduce it. The bug is following:
1. Database has multiple CFs.
2. Between one DB restart, the last log file is corrupted in the middle (not the tail)
3. During restart, DB crashes between flushes between two CFs.
The DB will fail to be opened again with error "SST file is ahead of WALs"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5851
Test Plan: Run the test itself.
Differential Revision: D17614721
fbshipit-source-id: 1b0abce49b203a76a039e38e76bc940429975f20
Summary:
Partitioned filters make use of a top-level index to find the partition in which the filter resides. The top-level index has a key per partition. The key is guaranteed to be larger or equal than any key in that partition. When used with format_version 3, which excludes the sequence number form index keys, the separator key in the index could be equal to the prefix of the keys in the next partition. In this way, when searching for the key, the top-level index will lead us to the previous partition, which has no key with that prefix. The prefix bloom test thus returns false, although the prefix exists in the bloom of the next partition.
The patch fixes that by a hack: It always adds the prefix of the first key of the next partition to the bloom of the current partition. In this way, in the corner cases that the index will lead us to the previous partition, we still can find the bloom filter there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5835
Differential Revision: D17513585
Pulled By: maysamyabandeh
fbshipit-source-id: e2d1ff26c759e6e03875c4d57f4228316ecf50e9
Summary:
The comparison of va_list and nullptr is always False under any arch, and will raise invalid operands of types error in aarch64 env (`error: invalid operands of types ‘va_list {aka __va_list}’ and ‘std::nullptr_t’ to binary ‘operator!=’`).
This patch removes this invalid assert.
Closes: https://github.com/facebook/rocksdb/issues/4277
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5836
Differential Revision: D17532470
fbshipit-source-id: ca98078ecbc6a9416c69de3bd6ffcfa33a0f0185
Summary:
format-diff.sh, a.k.a. 'make format', would use 'master'
to decide which commits are probably unpublished. Much better to use
facebook remote master since local master may not be caught up and may
have its own unpublished commits. Script now tries to compare against
facebook remote master branch (branch pointer is updated with any fetch
or pull), because those differences are what would be considered the
differences for a pull request.
Also, script would compare against *parent* of merge-base with that
reference point, which is just wrong since that includes the last
published commit.
In case of problems, you can now customize the reference point, by
setting the FORMAT_UPSTREAM variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5831
Test Plan: manual
Differential Revision: D17528462
Pulled By: pdillinger
fbshipit-source-id: 50fdb8795d683bf3c14d449669c1a5299e0dfa8b
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
Some recent commits might not have passed through the formatter. I formatted recent 45 commits. The script hangs for more commits so I stopped there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5827
Test Plan: Run all existing tests.
Differential Revision: D17483727
fbshipit-source-id: af23113ee63015d8a43d89a3bc2c1056189afe8f
Summary:
clang-analyzer has uncovered a bunch of places where the code is relying
on pointers being valid and one case (in VectorIterator) where a moved-from
object is being used:
In file included from db/range_tombstone_fragmenter.cc:17:
./util/vector_iterator.h:23:18: warning: Method called on moved-from object 'keys' of type 'std::vector'
current_(keys.size()) {
^~~~~~~~~~~
1 warning generated.
utilities/persistent_cache/block_cache_tier_file.cc:39:14: warning: Called C++ object pointer is null
Status s = env->NewRandomAccessFile(filepath, file, opt);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:47:19: warning: Called C++ object pointer is null
Status status = env_->GetFileSize(Path(), size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:290:14: warning: Called C++ object pointer is null
Status s = env_->FileExists(Path());
^~~~~~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:363:35: warning: Called C++ object pointer is null
CacheWriteBuffer* const buf = alloc_->Allocate();
^~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:399:41: warning: Called C++ object pointer is null
const uint64_t file_off = buf_doff_ * alloc_->BufferSize();
^~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:463:33: warning: Called C++ object pointer is null
size_t start_idx = lba.off_ / alloc_->BufferSize();
^~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:515:5: warning: Called C++ object pointer is null
alloc_->Deallocate(bufs_[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
7 warnings generated.
ar: creating librocksdb_debug.a
utilities/memory/memory_test.cc:68:25: warning: Called C++ object pointer is null
cache_set->insert(db->GetDBOptions().row_cache.get());
^~~~~~~~~~~~~~~~~~
1 warning generated.
The patch fixes these by adding assertions and explicitly passing in zero
when initializing VectorIterator::current_ (which preserves the existing
behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5821
Test Plan: Ran make check and make analyze to make sure the warnings have disappeared.
Differential Revision: D17455949
Pulled By: ltamasi
fbshipit-source-id: 363619618ea649a0674287f9f3b3393e390571ee
Summary:
Make class ObsoleteFilesTest inherit from DBTestBase.
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make obsolete_files_test
$./obsolete_files_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5820
Differential Revision: D17452348
Pulled By: riversand963
fbshipit-source-id: b09f4581a18022ca2bfd79f2836c0bf7083f5f25
Summary:
Originally the loop of closing WAL in PurgeObsoleteFiles resides inside a loop
iterating over the candidate files. It should be moved out.
Test plan (devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5804
Differential Revision: D17374350
Pulled By: riversand963
fbshipit-source-id: 2bee7343fc0481d9a385a87c7676491522285c96
Summary:
We are seeing a bug of wrong results with merging iterator's reseek avoidence feature and prefix extractor. Disable this optimization for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5815
Test Plan: Validated the same MyRocks case was fixed; run all existing tests.
Differential Revision: D17430776
fbshipit-source-id: aef664277ba0ab8a2e68331ff0db6ae682535371
Summary:
purge_queue_ maybe contains thousands sst files, for example manual compact a range. If full scan is triggered at the same time and the total sst files number is large, RocksDB will be blocked at https://github.com/facebook/rocksdb/blob/master/db/db_impl_files.cc#L150 for several seconds. In our environment we have 140,000 sst files and the manual compaction delete about 1000 sst files, it blocked about 2 minutes.
Commandeering https://github.com/facebook/rocksdb/issues/5290.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5796
Differential Revision: D17357775
Pulled By: riversand963
fbshipit-source-id: 20eacca917355b8de975ccc7b1c9a3e7bd5b201a
Summary:
https://github.com/facebook/rocksdb/issues/5797 charges the block cache with the total of user-provided charge plus the metadata charge. It had a bug where in MaintainPoolSize the user-provided charge was used instead of the total charge. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5813
Differential Revision: D17412783
Pulled By: maysamyabandeh
fbshipit-source-id: 45c0ac9f1e2233760db5ccd61399605cd74edc87
Summary:
Doing some code reordering in DBIter::Seek() and DBIter::SeekForPrev().
The logic largely remains the same, except slight difference when handling some stats when valid_ = false, where they are not supposed to be used anyway.
Also remove prefix_start_key_, which sometimes point a part of seek target, some times prefix_start_buf_, which is confusing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5794
Test Plan: Run all tests.
Differential Revision: D17375257
fbshipit-source-id: 7339a23898cecd3a8475bf72340fcd6f82b933c5
Summary:
Manual compaction may bring in very high load because sometime the amount of data involved in a compaction could be large, which may affect online service. So it would be good if the running compaction making the server busy can be stopped immediately. In this implementation, stopping manual compaction condition is only checked in slow process. We let deletion compaction and trivial move go through.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3971
Test Plan: add tests at more spots.
Differential Revision: D17369043
fbshipit-source-id: 575a624fb992ce0bb07d9443eb209e547740043c
Summary:
Update version of dependencies.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5777
Test Plan: make release
Differential Revision: D17269421
fbshipit-source-id: e76dbe5389e1d7f811739d3bc1e404b482dfce34
Summary:
Unity build fails because of name conflict of IsFileSectorAligned() after recent refactoring. Consolidate the function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5812
Test Plan: make unity. At least the failure goes away. Also "make all", "make release" and see no regression in normal cases.
Differential Revision: D17411403
fbshipit-source-id: 09d5653471ae2c3a4d898e120a024f7dd08d9c9d
Summary:
Refactoring to consolidate implementation details of legacy
Bloom filters. This helps to organize and document some related,
obscure code.
Also added make/cpp var TEST_CACHE_LINE_SIZE so that it's easy to
compile and run unit tests for non-native cache line size. (Fixed a
related test failure in db_properties_test.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5784
Test Plan:
make check, including Recently added Bloom schema unit tests
(in ./plain_table_db_test && ./bloom_test), and including with
TEST_CACHE_LINE_SIZE=128U and TEST_CACHE_LINE_SIZE=256U. Tested the
schema tests with temporary fault injection into new implementations.
Some performance testing with modified unit tests suggest a small to moderate
improvement in speed.
Differential Revision: D17381384
Pulled By: pdillinger
fbshipit-source-id: ee42586da996798910fc45ac0b6289147f16d8df
Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
PR https://github.com/facebook/rocksdb/issues/4020 enabled partitioned indexes/filters in stress tests; however,
this causes assertion failures in BatchedOpsStressTest. This patch
disables them until we can root cause the failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5811
Test Plan: Ran the script and made sure it only uses the binary search index.
Differential Revision: D17399366
Pulled By: ltamasi
fbshipit-source-id: adb116e6297f9c6ccd7ac15b6a16c9aa91f21ac5
Summary:
This will allow us to fix history by having the code changes for PR#5784 properly attributed to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5810
Differential Revision: D17400231
Pulled By: pdillinger
fbshipit-source-id: 2da8b1cdf2533cfedb35b5526eadefb38c291f09
Summary:
Several functions of UniversalCompactionPicker share most of the parameters. Move these functions to a class with those shared arguments as class members. Hopefully this will make code slightly easier to maintain.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5639
Test Plan: Run all existing test.
Differential Revision: D16996403
fbshipit-source-id: fffafd1897ab132b420b1dec073542cffb5c44de
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
DynamicBloom unit test now tests non-sequential as well as
sequential keys in testing FP rates. Also now verifies larger structures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5805
Test Plan: thisisthetest
Differential Revision: D17398109
Pulled By: pdillinger
fbshipit-source-id: 374074206c76d242efa378afc27830448a0e892a
Summary:
1. Put the similar logic of adding valid iterator to heap and check invalid iterator's status code to the same helper functions.
2. Because of 1, in the changing direction case, move around the places where we check status a little bit so that we can call the helper function there too. The logic would only divert in the case where the iterator is valid but status is not OK, which is not expected to happen. Add an assertion for that.
3. Put the logic of changing direction from forward to backward to a separate function so the unlikely code path is not in Prev().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5793
Test Plan: run all existing tests.
Differential Revision: D17374397
fbshipit-source-id: d595ffcf156095c4bd0f5532bacba854482a2332
Summary:
Currently IngestExternalFile() fails when its input files' ranges overlap. This condition doesn't need to hold for files that are to be ingested in L0, though.
This commit allows overlapping files and forces their target level to L0.
Additionally, ingest job's completion is logged to EventLogger, analogous to flush and compaction jobs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5539
Differential Revision: D17370660
Pulled By: riversand963
fbshipit-source-id: 749a3899b17d1be267a5afd5b0a99d96b38ab2f3
Summary:
Move definition and implementation for ArenaWrappedDBIter into its own .h/.cc files. Also, change inlining of functions to better comply with the Google C++ style guide.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5801
Test Plan: make check
Differential Revision: D17371012
Pulled By: anand1976
fbshipit-source-id: c1361abc2851575111e357a63d88be3b3d6cb341
Summary:
In preparing to utilize a new Intel instruction extension, I
noticed problems with the existing build script in regard to the
existing utilized extensions, either with USE_SSE or PORTABLE flags.
* PORTABLE=0 was interpreted the same as PORTABLE=1. Now empty and 0
mean the same. (I guess you were not supposed to set PORTABLE= if you
wanted non-portable--except that...)
* The Facebook build script extensions would set PORTABLE=1 even if
it's already set in a make var or environment. Now it does not override
a non-empty setting, so use PORTABLE=0 for fully optimized build,
overriding Facebook environment default.
* Put in an explanation of the USE_SSE flag where it's used by
build_detect_platform, and cleaned up some confusing/redundant
associated logic.
* If USE_SSE was set and expected intrinsics were not available,
build_detect_platform would exit early but build would proceed with
broken, incomplete configuration. Now warning is gracefully recovered.
* If USE_SSE was set and expected intrinsics were not available,
build would still try to use flags like -msse4.2 etc. which could lead
to unexpected compilation failure or binary incompatibility. Now those
flags are not used if the warning is issued.
This should not break or change existing, valid build scripts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5800
Test Plan: manual case testing
Differential Revision: D17369543
Pulled By: pdillinger
fbshipit-source-id: 4ee244911680ae71144d272c40aceea548e3ce88
Summary:
prefetch data for following block，avoid cache miss when doing crc caculate
I do performance test at kunpeng-920 server(arm-v8, 64core@2.6GHz)
./db_bench --benchmarks=crc32c --block_size=500000000
before optimise : 587313.500 micros/op 1 ops/sec; 811.9 MB/s (500000000 per op)
after optimise : 289248.500 micros/op 3 ops/sec; 1648.5 MB/s (500000000 per op)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5773
Differential Revision: D17347339
fbshipit-source-id: bfcd74f0f0eb4b322b959be68019ddcaae1e3341
Summary:
PR https://github.com/facebook/rocksdb/issues/4020 implicitly enabled the hash index as well in stress/crash
tests, resulting in assertion failures in Block. This patch disables
the hash index until we can pinpoint the root cause of these issues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5792
Test Plan:
Ran tools/db_crashtest.py and made sure it only uses index types 0 and 2
(binary search and partitioned index).
Differential Revision: D17346777
Pulled By: ltamasi
fbshipit-source-id: b4318f37f1fda3ee1bbff4ef2c2f556ca9e6b551
Summary:
This is required to compile on Windows with Visual Studio 2015.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5786
Differential Revision: D17335994
fbshipit-source-id: 8f9568310bc6f697e312b5e24ad465e9084f0011
Summary:
The max batch size that we can write to the WAL is controlled by a static manner. So if the leader write is less than 128 KB we will have the batch size as leader write size + 128 KB else the limit will be 1 MB. Both of them are statically defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5759
Differential Revision: D17329298
fbshipit-source-id: a3d910629d8d8ca84ea39ad89c2b2d284571ded5
Summary:
Use delete to disable automatic generated methods instead of private, and put the constructor together for more clear.This modification cause the unused field warning, so add unused attribute to disable this warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5009
Differential Revision: D17288733
fbshipit-source-id: 8a767ce096f185f1db01bd28fc88fef1cdd921f3
Summary:
cmake doesn't re-generate the timestamp on subsequent builds causing rebuilds of the lib
This improves compile time turn-arounds if you have rocksdb as a compileable library include, since with the state its now it will re-generate the time stamp .cc file each time you build, and thus re-compile + re-link the rocksdb library though anything in the source actually changed.
The original timestamp is recorded into `CMakeCache.txt` and will remain there until you flush this cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4799
Differential Revision: D17290040
fbshipit-source-id: 28357fef3422693c9c19e88fa2873c8db0f662ed
Summary:
- In `db_stress`, support choosing index type and whether to enable filter partitioning, and randomly set those options in crash test
- When partitioned filter is enabled by crash test, force partitioned index to also be enabled since it's a prerequisite
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4020
Test Plan:
currently this is blocked on fixing the bug that crash test caught:
```
$ TEST_TMPDIR=/data/compaction_bench python ./tools/db_crashtest.py blackbox --simple --interval=10 --max_key=10000000
...
Verification failed for column family 0 key 937501: Value not found: NotFound:
Crash-recovery verification failed :(
```
Differential Revision: D8508683
Pulled By: maysamyabandeh
fbshipit-source-id: 0337e5d0558bcef26b1f3699f47265a2c1e99629
Summary:
On older macOS like 10.10 we saw the following compiler error:
```
/go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb/env/env_posix.cc:845:19:
error: use of undeclared identifier 'CLOCK_THREAD_CPUTIME_ID'
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &ts);
^
```
According to mac's `man clock_gettime`: "These functions first appeared in Mac
OSX 10.12". So we should not try to compile it on earlier versions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5570
Test Plan:
verified it compiles now on 10.10. Also did some investigation to
ensure it does not cause regression on macOS 10.12+, although I do not
have access to such an environment to really test.
Differential Revision: D17322629
Pulled By: riversand963
fbshipit-source-id: e0a412223854f826b4d83e6d15c3739ff4620d7d
Summary:
for fillbatch benchmar, the numEntries should be [num_] but not [num_ / 1000] because numEntries is just the total entries we want to test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5198
Differential Revision: D17274664
Pulled By: anand1976
fbshipit-source-id: f96e952babdbac63fb99d14e1254d478a10437be
Summary:
i.e. if alive logfile is not being moved to archive while we are in GetSortedWalsOfType()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5695
Differential Revision: D17279489
Pulled By: vjnadimpalli
fbshipit-source-id: 02bcf920a75b812edba8b87c6079b4e6fd5e683c
Summary:
Bug found by valgrind. New DynamicBloom wasn't allocating in
block sizes. New assertion added that probes starting in final word
would be in bounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5783
Test Plan: ROCKSDB_VALGRIND_RUN=1 DISABLE_JEMALLOC=1 valgrind --leak-check=full ./dynamic_bloom_test
Differential Revision: D17270623
Pulled By: pdillinger
fbshipit-source-id: 1e0407504b875133a771383cd488c70f91be2b87
Summary:
Check that we don't accidentally change the on-disk format of
existing Bloom filter implementations, including for various
CACHE_LINE_SIZE (by changing temporarily).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5778
Test Plan: thisisthetest
Differential Revision: D17269630
Pulled By: pdillinger
fbshipit-source-id: c77017662f010a77603b7d475892b1f0d5563d8b
Summary:
When building with clang 9, warning is reported for InternalDBStatsType type names shadowed the one for statistics. Rename them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5779
Test Plan: Build with clang 9 and see it passes.
Differential Revision: D17239378
fbshipit-source-id: af28fb42066c738cd1b841f9fe21ab4671dafd18
Summary:
cmake list add +crypto flag when use armv8 cpu
the function crc32c_arm64 use HAVE_ARM64_CRYPTO to check if can enable arm-neon instructions :
#ifdef HAVE_ARM64_CRYPTO
/* Crc32c Parallel computation
* Algorithm comes from Intel whitepaper:
* crc-iscsi-polynomial-crc32-instruction-paper
*
* Input data is divided into three equal-sized blocks
* Three parallel blocks (crc0, crc1, crc2) for 1024 Bytes
* One Block: 42(BLK_LENGTH) * 8(step length: crc32c_u64) bytes
*/
but the cmakelist not check and pass crypto flag now
I check the default Makefile has it:
ifeq (,$(shell $(CXX) -fsyntax-only -march=armv8-a+crc -xc /dev/null 2>&1))
CXXFLAGS += -march=armv8-a+crc+crypto
CFLAGS += -march=armv8-a+crc+crypto
ARMCRC_SOURCE=1
endif
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5750
Differential Revision: D17242027
fbshipit-source-id: 443c9b89755b4bc34e265205ab922db1b2e14bde
Summary:
ReadYourOwnWriteStress occasionally times out on some platforms. The patch splits it to three.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5776
Differential Revision: D17231743
Pulled By: maysamyabandeh
fbshipit-source-id: d42eeaf22f61a48d50f9c404d98b1081ae8dac94
Summary:
These uninitialized member variables can cause a key to not be pinned when it should be, causing erroneous behavior. For example ingesting a file with range deletion tombstones will yield an "external file have corrupted keys" on a Mac.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5720
Differential Revision: D17217673
fbshipit-source-id: cd7df7ce3ad9cf69c841c4d3dc6fd144eff9e212
Summary:
Fixes https://github.com/facebook/rocksdb/issues/5734. By reading the code the assert don't quite make sense to me, since `dataSize` and `fileOffset` has no correlation. But my knowledge about `EncryptedEnv` is very limited.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5735
Test Plan:
run `ENCRYPTED_ENV=1 ./db_encryption_test`
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D17133849
fbshipit-source-id: bb7262d308e5b2503c400b180edc252668df0ef0
Summary:
The `#include "core_local.h"` was pulling in libgcc's `posix_memalign()`
declaration. That declaration specifies `throw()` whereas musl libc's
declaration does not. This was leading to the following compiler error
when using musl libc:
```
In file included from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb/port/jemalloc_helper.h:26:0,
from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb/util/jemalloc_nodump_allocator.h:11,
from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb/util/jemalloc_nodump_allocator.cc:6:
/go/native/x86_64-unknown-linux-musl/jemalloc/include/jemalloc/jemalloc.h:63:29: error: declaration of 'int posix_memalign(void**, size_t, size_t) throw ()' has a different exception specifier
# define je_posix_memalign posix_memalign
^
/go/native/x86_64-unknown-linux-musl/jemalloc/include/jemalloc/jemalloc.h:63:29: note: from previous declaration 'int posix_memalign(void**, size_t, size_t)'
# define je_posix_memalign posix_memalign
^
/go/native/x86_64-unknown-linux-musl/jemalloc/include/jemalloc/jemalloc.h:202:38: note: in expansion of macro 'je_posix_memalign'
JEMALLOC_EXPORT int JEMALLOC_NOTHROW je_posix_memalign(void **memptr,
^~~~~~~~~~~~~~~~~
make[4]: *** [CMakeFiles/rocksdb.dir/util/jemalloc_nodump_allocator.cc.o] Error 1
```
Since `#include "core_local.h"` is not actually used, we can just remove
it. I verified that fixes the build.
There was a related PR here (https://github.com/facebook/rocksdb/issues/2188), although the problem description is
slightly different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5583
Differential Revision: D16343227
fbshipit-source-id: 0386bc2b5fd55b2c3b5fba19382014efa52e44f8
Summary:
FullFilterBitsBuilder::CalculateSpace use CACHE_LINE_SIZE which is 64@X86 but 128@ARM64
when it run bloom_test.FullVaryingLengths it failed on ARM64 server,
the assert can be fixed by change 128->CACHE_LINE_SIZE*2 as merged
ASSERT_LE(FilterSize(), (size_t)((length * 10 / 8) + CACHE_LINE_SIZE * 2 + 5)) << length;
run bloom_test
before fix:
/root/rocksdb-master/util/bloom_test.cc:281: Failure
Expected: (FilterSize()) <= ((size_t)((length * 10 / 8) + 128 + 5)), actual: 389 vs 383
200
[ FAILED ] FullBloomTest.FullVaryingLengths (32 ms)
[----------] 4 tests from FullBloomTest (32 ms total)
[----------] Global test environment tear-down
[==========] 7 tests from 2 test cases ran. (116 ms total)
[ PASSED ] 6 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] FullBloomTest.FullVaryingLengths
after fix:
Filters: 37 good, 0 mediocre
[ OK ] FullBloomTest.FullVaryingLengths (90 ms)
[----------] 4 tests from FullBloomTest (90 ms total)
[----------] Global test environment tear-down
[==========] 7 tests from 2 test cases ran. (174 ms total)
[ PASSED ] 7 tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5745
Differential Revision: D17076047
fbshipit-source-id: e7beb5d55d4855fceb2b84bc8119a6b0759de635
Summary:
Since DynamicBloom is now only used in-memory, we're free to
change it without schema compatibility issues. The new implementation
is drawn from (with manifest permission)
https://github.com/pdillinger/wormhashing/blob/303542a767437f56d8b66cea6ebecaac0e6a61e9/bloom_simulation_tests/foo.cc#L613
This has several speed advantages over the prior implementation:
* Uses fastrange instead of %
* Minimum logic to determine first (and all) probed memory addresses
* (Major) Two probes per 64-bit memory fetch/write.
* Very fast and effective (murmur-like) hash expansion/re-mixing. (At
least on recent CPUs, integer multiplication is very cheap.)
While a Bloom filter with 512-bit cache locality has about a 1.15x FP
rate penalty (e.g. 0.84% to 0.97%), further restricting to two probes
per 64 bits incurs an additional 1.12x FP rate penalty (e.g. 0.97% to
1.09%). Nevertheless, the unit tests show no "mediocre" FP rate samples,
unlike the old implementation with more erratic FP rates.
Especially for the memtable, we expect speed to outweigh somewhat higher
FP rates. For example, a negative table query would have to be 1000x
slower than a BF query to justify doubling BF query time to shave 10% off
FP rate (working assumption around 1% FP rate). While that seems likely
for SSTs, my data suggests a speed factor of roughly 50x for the memtable
(vs. BF; ~1.5% lower write throughput when enabling memtable Bloom
filter, after this change). Thus, it's probably not worth even 5% more
time in the Bloom filter to shave off 1/10th of the Bloom FP rate, or 0.1%
in absolute terms, and it's probably at least 20% slower to recoup that
much FP rate from this new implementation. Because of this, we do not see
a need for a 'locality' option that affects the MemTable Bloom filter
and have decoupled the MemTable Bloom filter from Options::bloom_locality.
Note that just 3% more memory to the Bloom filter (10.3 bits per key vs.
just 10) is able to make up for the ~12% FP rate drop in the new
implementation:
[] # Nearly "ideal" FP-wise but reasonably fast cache-local implementation
[~/wormhashing/bloom_simulation_tests] ./foo_gcc_IMPL_CACHE_WORM64_FROM32_any.out 10000000 6 10 $RANDOM 100000000
./foo_gcc_IMPL_CACHE_WORM64_FROM32_any.out time: 3.29372 sampled_fp_rate: 0.00985956 ...
[] # Close match to this new implementation
[~/wormhashing/bloom_simulation_tests] ./foo_gcc_IMPL_CACHE_MUL64_BLOCK_FROM32_any.out 10000000 6 10.3 $RANDOM 100000000
./foo_gcc_IMPL_CACHE_MUL64_BLOCK_FROM32_any.out time: 2.10072 sampled_fp_rate: 0.00985655 ...
[] # Old locality=1 implementation
[~/wormhashing/bloom_simulation_tests] ./foo_gcc_IMPL_CACHE_ROCKSDB_DYNAMIC_any.out 10000000 6 10 $RANDOM 100000000
./foo_gcc_IMPL_CACHE_ROCKSDB_DYNAMIC_any.out time: 3.95472 sampled_fp_rate: 0.00988943 ...
Also note the dramatic speed improvement vs. alternatives.
--
Performance unit test: DynamicBloomTest.concurrent_with_perf is updated
to report more precise timing data. (Measure running time of each
thread, not just longest running thread, etc.) Results averaged over
various sizes enabled with --enable_perf and 20 runs each; old dynamic
bloom refers to locality=1, the faster of the old:
old dynamic bloom, avg add latency = 65.6468
new dynamic bloom, avg add latency = 44.3809
old dynamic bloom, avg query latency = 50.6485
new dynamic bloom, avg query latency = 43.2186
old avg parallel add latency = 41.678
new avg parallel add latency = 24.5238
old avg parallel hit latency = 14.6322
new avg parallel hit latency = 12.3939
old avg parallel miss latency = 16.7289
new avg parallel miss latency = 12.2134
Tested on a dedicated 64-bit production machine at Facebook. Significant
improvement all around.
Despite now using std::atomic<uint64_t>, quick before-and-after test on
a 32-bit machine (Intel Atom N270, released 2008) shows no regression in
performance, in some cases modest improvement.
--
Performance integration test (synthetic): with DEBUG_LEVEL=0, used
TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom,readmissing,readrandom,stats --num=2000000
and optionally with -memtable_whole_key_filtering -memtable_bloom_size_ratio=0.01
300 runs each configuration.
Write throughput change by enabling memtable bloom:
Old locality=0: -3.06%
Old locality=1: -2.37%
New: -1.50%
conclusion -> seems to substantially close the gap
Readmissing throughput change by enabling memtable bloom:
Old locality=0: +34.47%
Old locality=1: +34.80%
New: +33.25%
conclusion -> maybe a small new penalty from FP rate
Readrandom throughput change by enabling memtable bloom:
Old locality=0: +31.54%
Old locality=1: +31.13%
New: +30.60%
conclusion -> maybe also from FP rate (after memtable flush)
--
Another conclusion we can draw from this new implementation is that the
existing 32-bit hash function is not inherently crippling the Bloom
filter speed or accuracy, below about 5 million keys. For speed, the
implementation is essentially the same whether starting with 32-bits or
64-bits of hash; it just determines whether the first multiplication
after fastrange is a pseudorandom expansion or needed re-mix. Note that
this multiplication can occur while memory is fetching.
For accuracy, in a standard configuration, you need about 5 million
keys before you have about a 1.1x FP penalty due to using a
32-bit hash vs. 64-bit:
[~/wormhashing/bloom_simulation_tests] ./foo_gcc_IMPL_CACHE_MUL64_BLOCK_FROM32_any.out $((5 * 1000 * 1000 * 10)) 6 10 $RANDOM 100000000
./foo_gcc_IMPL_CACHE_MUL64_BLOCK_FROM32_any.out time: 2.52069 sampled_fp_rate: 0.0118267 ...
[~/wormhashing/bloom_simulation_tests] ./foo_gcc_IMPL_CACHE_MUL64_BLOCK_any.out $((5 * 1000 * 1000 * 10)) 6 10 $RANDOM 100000000
./foo_gcc_IMPL_CACHE_MUL64_BLOCK_any.out time: 2.43871 sampled_fp_rate: 0.0109059
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5762
Differential Revision: D17214194
Pulled By: pdillinger
fbshipit-source-id: ad9da031772e985fd6b62a0e1db8e81892520595
Summary:
This avoids rehashing the key in TrackKey() in case the key is not already
in the map of tracked keys, which will happen at least once per key used in a
transaction.
Additionally fix two typos.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5696
Differential Revision: D17210178
Pulled By: lth
fbshipit-source-id: 7e2c28e9e505c1d1c1535d435250cf2b191a6fdf
Summary:
DynamicBloom was being used both for memory-only and for on-disk filters, as part of the PlainTable format. To set up enhancements to the memtable Bloom filter, this splits the code into two copies and removes unused features from each copy. Adds test PlainTableDBTest.BloomSchema to ensure no accidental change to that format.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5767
Differential Revision: D17206963
Pulled By: pdillinger
fbshipit-source-id: 6cce8d55305ed0df051b4c58bdc98c8ad81d0553
Summary:
Iterators reseek to the target key after iterating over max_sequential_skip_in_iterations invalid values. The logic is susceptible to an infinite loop bug, which has been present with WritePrepared Transactions up until 6.2 release. Although the bug is not present on master, the patch adds a unit test to prevent it from resurfacing again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5727
Differential Revision: D16952759
Pulled By: maysamyabandeh
fbshipit-source-id: d0d973dddc8dfabd5a794931232aa4c862c74f51
Summary:
Adding a light weight API to get last live WAL file name and size. Meant to be used as a helper for backup/restore tooling in a larger ecosystem such as MySQL with a MyRocks storage engine.
Specifically within MySQL's backup/restore mechanism, this call can be made with a write lock on the mysql db to get a transactionally consistent snapshot of the current WAL file position along with other non-rocksdb log/data files.
Without this, the alternative would be to take the aforementioned lock, scan the WAL dir for all files, find the last file and note its exact size as the rocksdb 'checkpoint'.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5765
Differential Revision: D17172717
Pulled By: affandar
fbshipit-source-id: f2fabafd4c0e6fc45f126670c8c88a9f84cb8a37
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
Before this PR, when the number of column families involved in a file ingestion exceeds 2, a bug in the looping logic prevents correct file number being assigned to each ingestion job.
Also skip deleting non-existing hard links during cleanup-after-failure.
Test plan (devserver)
```
$COMPILE_WITH_ASAN=1 make all
$./external_sst_file_test --gtest_filter=ExternalSSTFileTest/ExternalSSTFileTest.IngestFilesIntoMultipleColumnFamilies_*/*
$makke check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5760
Differential Revision: D17142982
Pulled By: riversand963
fbshipit-source-id: 06c1847a4e7a402647bcf28d124e70f2a0f9daf6
Summary:
Before this PR, the following sequence of events can cause assertion failure as shown below.
Stack trace (partial):
```
(gdb) bt
2 0x00007f59b350ad15 in __assert_fail_base (fmt=<optimized out>, assertion=assertion@entry=0x9f8390 "mark_as_compacted ? !inputs_[i][j]->being_compacted : inputs_[i][j]->being_compacted", file=file@entry=0x9e347c "db/compaction/compaction.cc", line=line@entry=395, function=function@entry=0xa21ec0 <rocksdb::Compaction::MarkFilesBeingCompacted(bool)::__PRETTY_FUNCTION__> "void rocksdb::Compaction::MarkFilesBeingCompacted(bool)") at assert.c:92
3 0x00007f59b350adc3 in __GI___assert_fail (assertion=assertion@entry=0x9f8390 "mark_as_compacted ? !inputs_[i][j]->being_compacted : inputs_[i][j]->being_compacted", file=file@entry=0x9e347c "db/compaction/compaction.cc", line=line@entry=395, function=function@entry=0xa21ec0 <rocksdb::Compaction::MarkFilesBeingCompacted(bool)::__PRETTY_FUNCTION__> "void rocksdb::Compaction::MarkFilesBeingCompacted(bool)") at assert.c:101
4 0x0000000000492ccd in rocksdb::Compaction::MarkFilesBeingCompacted (this=<optimized out>, mark_as_compacted=<optimized out>) at db/compaction/compaction.cc:394
5 0x000000000049467a in rocksdb::Compaction::Compaction (this=0x7f59af013000, vstorage=0x7f581af53030, _immutable_cf_options=..., _mutable_cf_options=..., _inputs=..., _output_level=<optimized out>, _target_file_size=0, _max_compaction_bytes=0, _output_path_id=0, _compression=<incomplete type>, _compression_opts=..., _max_subcompactions=0, _grandparents=..., _manual_compaction=false, _score=4, _deletion_compaction=true, _compaction_reason=rocksdb::CompactionReason::kFIFOTtl) at db/compaction/compaction.cc:241
6 0x00000000004af9bc in rocksdb::FIFOCompactionPicker::PickTTLCompaction (this=0x7f59b31a6900, cf_name=..., mutable_cf_options=..., vstorage=0x7f581af53030, log_buffer=log_buffer@entry=0x7f59b1bfa930) at db/compaction/compaction_picker_fifo.cc:101
7 0x00000000004b0771 in rocksdb::FIFOCompactionPicker::PickCompaction (this=0x7f59b31a6900, cf_name=..., mutable_cf_options=..., vstorage=0x7f581af53030, log_buffer=0x7f59b1bfa930) at db/compaction/compaction_picker_fifo.cc:201
8 0x00000000004838cc in rocksdb::ColumnFamilyData::PickCompaction (this=this@entry=0x7f59b31b3700, mutable_options=..., log_buffer=log_buffer@entry=0x7f59b1bfa930) at db/column_family.cc:933
9 0x00000000004f3645 in rocksdb::DBImpl::BackgroundCompaction (this=this@entry=0x7f59b3176000, made_progress=made_progress@entry=0x7f59b1bfa6bf, job_context=job_context@entry=0x7f59b1bfa760, log_buffer=log_buffer@entry=0x7f59b1bfa930, prepicked_compaction=prepicked_compaction@entry=0x0, thread_pri=rocksdb::Env::LOW) at db/db_impl/db_impl_compaction_flush.cc:2541
10 0x00000000004f5e2a in rocksdb::DBImpl::BackgroundCallCompaction (this=this@entry=0x7f59b3176000, prepicked_compaction=prepicked_compaction@entry=0x0, bg_thread_pri=bg_thread_pri@entry=rocksdb::Env::LOW) at db/db_impl/db_impl_compaction_flush.cc:2312
11 0x00000000004f648e in rocksdb::DBImpl::BGWorkCompaction (arg=<optimized out>) at db/db_impl/db_impl_compaction_flush.cc:2087
```
This can be caused by the following sequence of events.
```
Time
| thr bg_compact_thr1 bg_compact_thr2
| write
| flush
| mark all l0 as being compacted
| write
| flush
| add cf to queue again
| mark all l0 as being
| compacted, fail the
| assertion
V
```
Test plan (on devserver)
Since bg_compact_thr1 and bg_compact_thr2 are two threads executing the same
code, it is difficult to use sync point dependency to
coordinate their execution. Therefore, I choose to use db_stress.
```
$TEST_TMPDIR=/dev/shm/rocksdb ./db_stress --periodic_compaction_seconds=1 --max_background_compactions=20 --format_version=2 --memtablerep=skip_list --max_write_buffer_number=3 --cache_index_and_filter_blocks=1 --reopen=20 --recycle_log_file_num=0 --acquire_snapshot_one_in=10000 --delpercent=4 --log2_keys_per_lock=22 --compaction_ttl=1 --block_size=16384 --use_multiget=1 --compact_files_one_in=1000000 --target_file_size_multiplier=2 --clear_column_family_one_in=0 --max_bytes_for_level_base=10485760 --use_full_merge_v1=1 --target_file_size_base=2097152 --checkpoint_one_in=1000000 --mmap_read=0 --compression_type=zstd --writepercent=35 --readpercent=45 --subcompactions=4 --use_merge=0 --write_buffer_size=4194304 --test_batches_snapshots=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox --use_direct_reads=0 --compact_range_one_in=1000000 --open_files=-1 --destroy_db_initially=0 --progress_reports=0 --compression_zstd_max_train_bytes=0 --snapshot_hold_ops=100000 --enable_pipelined_write=0 --nooverwritepercent=1 --compression_max_dict_bytes=0 --max_key=1000000 --prefixpercent=5 --flush_one_in=1000000 --ops_per_thread=40000 --index_block_restart_interval=7 --cache_size=1048576 --compaction_style=2 --verify_checksum=1 --delrangepercent=1 --use_direct_io_for_flush_and_compaction=0
```
This should see no assertion failure.
Last but not least,
```
$COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5754
Differential Revision: D17109791
Pulled By: riversand963
fbshipit-source-id: 25fc46101235add158554e096540b72c324be078
Summary:
In order to foster healthy open source communities, we're adopting the
[Contributor Covenant](https://www.contributor-covenant.org/). It has been
built by open source community members and represents a shared understanding of
what is expected from a healthy community.
Reviewed By: josephsavona, danobi, rdzhabarov
Differential Revision: D17104640
fbshipit-source-id: d210000de686c5f0d97d602b50472d5869bc6a49
Summary:
Open-source users recently reported two occurrences of LSM-tree corruption (https://github.com/facebook/rocksdb/issues/5558 is one), which would be caught by options.force_consistency_checks = true. options.force_consistency_checks has a usability limitation because it crashes the service once inconsistency is detected. This makes the feature hard to use. Most users serve from multiple RocksDB shards per server and the impacts of crashing the service is higher than it should be.
Instead, we just pass the error back to users without killing the service, and ask them to deal with the problem accordingly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5744
Differential Revision: D17096940
Pulled By: pdhandharia
fbshipit-source-id: b6780039044e265f26ed2ad03c51f4abbe8b603c
Summary:
Row cache is not supported in LITE mode. So disable the test in that mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5756
Test Plan: make LITE=1 all check
Differential Revision: D17115684
Pulled By: anand1976
fbshipit-source-id: e6433c2e528674645cea76cdfc80ddc473708fc2
Summary:
https://github.com/facebook/rocksdb/pull/5741 added compaction TTL to crash test, but it causes assertion fails for FIFO compaction. Disable this combination for now while we debug the assertion failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5749
Test Plan: Run crash test and observe that when compaction_style=2, compaction_ttl is always 0.
Differential Revision: D17078292
fbshipit-source-id: 446821a3b9739956094d5e4f9be1251a15b57f5d
Summary:
Covering periodic compaction and compaction TTL can help us expose potential issues. Add it there.
Randomly select value for these two options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5741
Test Plan: Run crash_test and see the perameters generated.
Differential Revision: D17059515
fbshipit-source-id: 8213974846a0b6a22fc13be705825c9054d1d097
Summary:
This condition is now a normal occurrence during write burst so there is
no need to warn the user about it. Here is a scenario where it happens
under completely normal conditions.
* Initially we have a DB of three levels (L0, L1, and L2) that is stable, i.e., compaction scores are all less than one.
* Now a write burst comes along. At first L0 blows up a bit in size as compaction hasn't had a chance to catch up.
* As a result of the above, `base_bytes_min` also increases since it is based on L0 size as of https://github.com/facebook/rocksdb/issues/4338
* If `base_bytes_min` increased enough (i.e., to be larger than L1), then we are shown the warning that the DB has more levels than necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5742
Differential Revision: D17059221
fbshipit-source-id: e4a31d6eea42089a8d273095f19653991bd91bea
Summary:
in order to avoid reallocations for a scratch std::string on every call to Next().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5702
Differential Revision: D16867803
fbshipit-source-id: 1391220a1b172b23336bbc71dc0c79ccf3b1c701
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Crc32c Parallel computation coding optimization:
Macro unfolding removes the "for" loop and is good to decrease branch-miss in arm64 micro architecture
1024 Bytes is divided into 8(head) + 1008( 6 * 7 * 3 * 8 ) + 8(tail) three parts
Macro unfolding 42 loops to 6 CRC32C7X24BYTESs
1 CRC32C7X24BYTES containing 7 CRC32C24BYTESs
1, crc32c_test
[==========] Running 4 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 4 tests from CRC
[ RUN ] CRC.StandardResults
[ OK ] CRC.StandardResults (1 ms)
[ RUN ] CRC.Values
[ OK ] CRC.Values (0 ms)
[ RUN ] CRC.Extend
[ OK ] CRC.Extend (0 ms)
[ RUN ] CRC.Mask
[ OK ] CRC.Mask (0 ms)
[----------] 4 tests from CRC (1 ms total)
[----------] Global test environment tear-down
[==========] 4 tests from 1 test case ran. (1 ms total)
[ PASSED ] 4 tests.
2, db_bench --benchmarks="crc32c"
crc32c : 0.218 micros/op 4595390 ops/sec; 17950.7 MB/s (4096 per op)
3, repeated crc32c_test case 60000 times
perf stat -e branch-miss -- ./crc32c_test
before optimization:
739,426,504 branch-miss
after optimization:
1,128,572 branch-miss
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5675
Differential Revision: D16989210
fbshipit-source-id: 7204e6069bb6ed066d49c2d1b3ac385065a98557
Summary:
PR https://github.com/facebook/rocksdb/issues/5584 decoupled the uncompression dictionary object from the underlying block data; however, this defeats the purpose of the digested ZSTD dictionary, since the whole point
of the digest is to create it once and reuse it over and over again. This patch goes back to
storing the uncompression dictionary itself in the cache (which should be now safe to do,
since it no longer includes a Statistics pointer), while preserving the rest of the refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5645
Test Plan: make asan_check
Differential Revision: D16551864
Pulled By: ltamasi
fbshipit-source-id: 2a7e2d34bb16e70e3c816506d5afe1d842057800
Summary:
AtomicFlushStressTest is a powerful test, but right now we only run it for atomic_flush=true + disable_wal=true. We further extend it to the case where atomic_flush=false + disable_wal = false. All the workload generation and validation can stay the same.
Atomic flush crash test is also changed to switch between the two test scenarios. It makes the name "atomic flush crash test" out of sync from what it really does. We leave it as it is to avoid troubles with continous test set-up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5729
Test Plan: Run "CRASH_TEST_KILL_ODD=188 TEST_TMPDIR=/dev/shm/ USE_CLANG=1 make whitebox_crash_test_with_atomic_flush", observe the settings used and see it passed.
Differential Revision: D16969791
fbshipit-source-id: 56e37487000ae631e31b0100acd7bdc441c04163
Summary:
To improve code readability, since RetrieveBlock already calls MaybeReadBlockAndLoadToCache, we avoid name similarity of the functions that call RetrieveBlock with MaybeReadBlockAndLoadToCache. The patch thus renames MaybeLoadBlocksToCache to RetrieveMultipleBlock and deletes GetDataBlockFromCache, which contains only two lines.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5726
Differential Revision: D16962535
Pulled By: maysamyabandeh
fbshipit-source-id: 99e8946808ce4eb7857592b9003812e3004f92d6
Summary:
The batched MultiGet() implementation was not correctly handling bloom filter lookups when whole_key_filtering is disabled. It was incorrectly skipping keys not in the prefix_extractor domain, and not calling transform for keys in domain. This PR fixes both problems by moving the domain check and transformation to the FilterBlockReader.
Tests:
Unit test (confirmed failed before the fix)
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5665
Differential Revision: D16902380
Pulled By: anand1976
fbshipit-source-id: a6be81ad68a6e37134a65246aec7a2c590eccf00
Summary:
The comments of snap_refresh_nanos advertise that the snapshot refresh feature will be disabled when the option is set to 0. This contract is however not honored in the code: https://github.com/facebook/rocksdb/pull/5278
The patch fixes that and also adds an assert to ensure that the feature is not used when the option is zero.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5724
Differential Revision: D16918185
Pulled By: maysamyabandeh
fbshipit-source-id: fec167287df7d85093e087fc39c0eb243e3bbd7e
Summary:
Recently readahead is introduced for checksum verifying. However, users cannot override the setting for the checksum verifying before external SST file ingestion. Introduce a new option for the purpose.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5721
Test Plan: Add a new unit test for it.
Differential Revision: D16906896
fbshipit-source-id: 218ec37001ddcc05411cefddbe233d15ab308476
Summary:
We see this TSAN warning:
WARNING: ThreadSanitizer: data race (pid=282806)
Write of size 8 at 0x7b6c00000e38 by thread T16 (mutexes: write M1023578822185846136):
#0 operator delete(void*) <null> (libtsan.so.0+0x0000000795f8)
https://github.com/facebook/rocksdb/issues/1 rocksdb::DBImpl::BackgroundFlush(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::FlushReason*, rocksdb::Env::Priority) db/db_impl/db_impl_compaction_flush.cc:2202 (db_flush_test+0x00000060b462)
https://github.com/facebook/rocksdb/issues/2 rocksdb::DBImpl::BackgroundCallFlush(rocksdb::Env::Priority) db/db_impl/db_impl_compaction_flush.cc:2226 (db_flush_test+0x00000060cbd8)
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::BGWorkFlush(void*) db/db_impl/db_impl_compaction_flush.cc:2073 (db_flush_test+0x00000060d5ac)
......
Previous atomic write of size 4 at 0x7b6c00000e38 by main thread:
#0 __tsan_atomic32_fetch_sub <null> (libtsan.so.0+0x00000006d721)
https://github.com/facebook/rocksdb/issues/1 std::__atomic_base<int>::fetch_sub(int, std::memory_order) /mnt/gvfs/third-party2/libgcc/c67031f0f739ac61575a061518d6ef5038f99f90/7.x/platform007/5620abc/include/c++/7.3.0/bits/atomic_base.h:524 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/2 rocksdb::ColumnFamilyData::Unref() db/column_family.h:286 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::FlushMemTable(rocksdb::ColumnFamilyData*, rocksdb::FlushOptions const&, rocksdb::FlushReason, bool) db/db_impl/db_impl_compaction_flush.cc:1624 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/4 rocksdb::DBImpl::TEST_FlushMemTable(rocksdb::ColumnFamilyData*, rocksdb::FlushOptions const&) db/db_impl/db_impl_debug.cc:127 (db_flush_test+0x00000061ace9)
https://github.com/facebook/rocksdb/issues/5 rocksdb::DBFlushTest_CFDropRaceWithWaitForFlushMemTables_Test::TestBody() db/db_flush_test.cc:320 (db_flush_test+0x0000004b44e5)
https://github.com/facebook/rocksdb/issues/6 void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.7.0/fused-src/gtest/gtest-all.cc:3824 (db_flush_test+0x000000be2988)
......
It's still very clear the cause of the warning is because that TSAN treats results from relaxed atomic::fetch_sub() as non-atomic with the operation itself. We can make it more explicit by bumping up the order to CS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5723
Test Plan: Run all existing test.
Differential Revision: D16908250
fbshipit-source-id: bf17d39ed19058372bdf97f6440a743f88153021
Summary:
Atomic white box test's kill odd is the same as normal test. However, in the scenario that only WritableFileWriter::Append() is blacklisted, WritableFileWriter::Flush() dominates the killing odds. Normally, most of WritableFileWriter::Flush() are called in WAL writes, where every write triggers a WAL flush. In atomic test, WAL is disabled, so the kill happens less frequently than we antipated. In some rare cases, the kill didn't end up with happening (for reasons I still don't fully understand) and cause the stress test timeout.
If WAL is disabled, make the odds 5x likely to trigger.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5717
Test Plan: Run whitebox_crash_test_with_atomic_flush and whitebox_crash_test and observe the kill odds printed out.
Differential Revision: D16897237
fbshipit-source-id: cbf5d96f6fc0e980523d0f1f94bf4e72cdb82d1c
Summary:
Right now VerifyChecksum() doesn't do read-ahead. In some use cases, users won't be able to achieve good performance. With this change, by default, RocksDB will do a default readahead, and users will be able to overwrite the readahead size by passing in a ReadOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5713
Test Plan: Add a new unit test.
Differential Revision: D16860874
fbshipit-source-id: 0cff0fe79ac855d3d068e6ccd770770854a68413
Summary:
Previous PR https://github.com/facebook/rocksdb/pull/3601 added support for making prefix_extractor dynamically mutable. However, there was a missing check for hash index when creating new BlockBasedTableIterator. While the check may be redundant because no other types of IndexReader makes uses of the flag, it is less error-prone to add the missing check so that future index reader implementation will not worry about violating the contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5712
Differential Revision: D16842052
Pulled By: miasantreble
fbshipit-source-id: aef11c0ff7a690ed248f5b8fe23481cac486b381
Summary:
In valgrind_test, TransactionTest.GetWithoutSnapshot ran 2 hours and still didn't finish. Black list from valgrind_test to prevent timeout.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5715
Test Plan: run "make valgrind_test" and see whether the test is still generated.
Differential Revision: D16866009
fbshipit-source-id: 92c78049b0bc1c2b9a0dfc1b7c8a9206b36f02f0
Summary:
Update HISTORY.md by removing a feature from "Unreleased" to 6.4.0 after cherry-picking related commits to 6.4.fb branch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5714
Differential Revision: D16865334
Pulled By: riversand963
fbshipit-source-id: f17ede905a1dfbbcdf98806ca398c618cf54748a
Summary:
This was previously broken, as the performance context-related
macro signatures in file monitoring/perf_context_imp.h
deviated for the case when NPERF_CONTEXT was defined and when it
was not.
Update the macros for the `-DNPERF_CONTEXT` case, so it compiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5704
Differential Revision: D16867746
fbshipit-source-id: 05539724cb1f7955ecc42828365836a677759ad9
Summary:
VersionSet::ApproximateSize doesn't need to create two separate index iterators and do binary search for each in BlockBasedTable. So BlockBasedTable::ApproximateSize was added that creates the iterator once and uses it to calculate the data size between start and end keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5693
Differential Revision: D16774056
Pulled By: elipoz
fbshipit-source-id: 53ce262e1a057788243bf30cd9b8aa6581df1a18
Summary:
there is no need to return void*, as
std::thread::thread(Func&& f, Args&&... args ) only requires `Func` to
be callable.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5709
Differential Revision: D16832894
fbshipit-source-id: a1e1b876fa8d55589ef5feb5b27f3a435068b747
Summary:
Add a command in ldb so that users can print out tombstones in SST files.
In order to test the code, change the interface of LDBCommandRunner::RunCommand() so that it doesn't return from the program, but return the status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5615
Test Plan: Add a new unit test
Differential Revision: D16550326
fbshipit-source-id: 88ddfe6984bdcbb3a528abdd115089df09eba52e
Summary:
Previously, the end key of a range deletion tombstone was considered exclusive for the purposes of deletion, but considered inclusive when checking if two SSTables overlap. For example, an SSTable with a range deletion tombstone [a, b) would be considered overlapping with an SSTable with a range deletion tombstone [b, c). This commit fixes this check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5649
Differential Revision: D16808765
Pulled By: anand1976
fbshipit-source-id: 5c7ad1c027e4f778d35070e5dae1b8e6037e0d68
Summary:
PR https://github.com/facebook/rocksdb/issues/5298 (and subsequent related patches) unintentionally changed the
semantics of cache_index_and_filter_blocks: historically, this option
only affected the main index/filter block; with the changes, it affects
index/filter partitions as well. This can cause performance issues when
cache_index_and_filter_blocks is false since in this case, partitions are
neither cached nor preloaded (i.e. they are loaded on demand upon each
access). The patch reverts to the earlier behavior, that is, partitions
are cached similarly to data blocks regardless of the value of the above
option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5705
Test Plan:
make check
./db_bench -benchmarks=fillrandom --statistics --stats_interval_seconds=1 --duration=30 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false
./db_bench -benchmarks=readrandom --use_existing_db --statistics --stats_interval_seconds=1 --duration=10 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false --cache_size=8000000000
Relevant statistics from the readrandom benchmark with the old code:
rocksdb.block.cache.index.miss COUNT : 0
rocksdb.block.cache.index.hit COUNT : 0
rocksdb.block.cache.index.add COUNT : 0
rocksdb.block.cache.index.bytes.insert COUNT : 0
rocksdb.block.cache.index.bytes.evict COUNT : 0
rocksdb.block.cache.filter.miss COUNT : 0
rocksdb.block.cache.filter.hit COUNT : 0
rocksdb.block.cache.filter.add COUNT : 0
rocksdb.block.cache.filter.bytes.insert COUNT : 0
rocksdb.block.cache.filter.bytes.evict COUNT : 0
With the new code:
rocksdb.block.cache.index.miss COUNT : 2500
rocksdb.block.cache.index.hit COUNT : 42696
rocksdb.block.cache.index.add COUNT : 2500
rocksdb.block.cache.index.bytes.insert COUNT : 4050048
rocksdb.block.cache.index.bytes.evict COUNT : 0
rocksdb.block.cache.filter.miss COUNT : 2500
rocksdb.block.cache.filter.hit COUNT : 4550493
rocksdb.block.cache.filter.add COUNT : 2500
rocksdb.block.cache.filter.bytes.insert COUNT : 10331040
rocksdb.block.cache.filter.bytes.evict COUNT : 0
Differential Revision: D16817382
Pulled By: ltamasi
fbshipit-source-id: 28a516b0da1f041a03313e0b70b28cf5cf205d00
Summary:
Fix a bug in write unprepared savepoints. When flushing the write batch according to savepoint boundaries, we were forgetting to flush the last write batch after the last savepoint, meaning that some data was not written to DB.
Also, add a small optimization where we avoid flushing empty batches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5703
Differential Revision: D16811996
Pulled By: lth
fbshipit-source-id: 600c7e0e520ad7a8fad32d77e11d932453e68e3f
Summary:
Some accesses to blob_files_ and open_ttl_files_ in BlobDBImpl, as well
as to expiration_range_ in BlobFile were not properly synchronized.
The patch fixes this and also makes sure the invariant that obsolete_files_
is a subset of blob_files_ holds even when an attempt to delete an obsolete
blob file fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5698
Test Plan:
COMPILE_WITH_TSAN=1 make blob_db_test
gtest-parallel --repeat=1000 ./blob_db_test --gtest_filter="*ShutdownWait*"
The test fails with TSAN errors ~20 times out of 1000 without the patch but
completes successfully 1000 out of 1000 times with the fix.
Differential Revision: D16793235
Pulled By: ltamasi
fbshipit-source-id: 8034b987598d4fdc9f15098d4589cc49cde484e9
Summary:
In MyRocks, there are cases where we write while iterating through keys. This currently breaks WBWIIterator, because if a write batch flushes during iteration, the delta iterator would point to invalid memory.
For now, fix by disallowing flush if there are active iterators. In the future, we will loop through all the iterators on a transaction, and refresh the iterators when a write batch is flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5699
Differential Revision: D16794157
Pulled By: lth
fbshipit-source-id: 5d5bf70688bd68fe58e8a766475ae88fd1be3190
Summary:
Fix the following clang analyze failures:
```
In file included from utilities/transactions/transaction_test.cc:8:
./utilities/transactions/transaction_test.h:174:14: warning: Attempt to delete released memory
delete root_db;
^
```
The destructor of StackableDB already deletes the root db and there is no need to delete the db separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5700
Test Plan: USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j24 analyze
Differential Revision: D16800579
Pulled By: maysamyabandeh
fbshipit-source-id: 64c2d70f23e07e6a15242add97c744902ea33be5
Summary:
Currently, if a write is done without a snapshot, then `largest_validated_seq_` is set to `kMaxSequenceNumber`. This is too aggressive, because an iterator with a snapshot created after this write should be valid.
Set `largest_validated_seq_` to `GetLastPublishedSequence` instead. The variable means that no keys in the current tracked key set has changed by other transactions since `largest_validated_seq_`.
Also, do some extra cleanup in Clear() for safety.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5697
Differential Revision: D16788613
Pulled By: lth
fbshipit-source-id: f2aa40b8b12e0c0cf9e38c940fecc8f1cc0d2385
Summary:
When updating compiler version for MyRocks I'm seeing this error with rocksdb:
```
ome/yzha/mysql/mysql-fork2/rocksdb/table/get_context.h:91:3: error: explicitly defaulted default constructor is implicitly deleted
[-Werror,-Wdefaulted-function-deleted]
GetContext() = default;
^
/home/yzha/mysql/mysql-fork2/rocksdb/table/get_context.h:166:18: note: default constructor of 'GetContext' is implicitly deleted because field
'tracing_get_id_' of const-qualified type 'const uint64_t' (aka 'const unsigned long') would not be initialized
const uint64_t tracing_get_id_;
^
```
The error itself is rather self explanatory and makes sense.
Given that no one seems to be using the default ctor (they shouldn't, anyway), I'm deleting it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5685
Differential Revision: D16747712
Pulled By: yizhang82
fbshipit-source-id: 95c0acb958a1ed41154c0047d2e6fce7644de53f
Summary:
With changes made in https://github.com/facebook/rocksdb/pull/5664 we meant to pass snap_released parameter of ::IsInSnapshot from the read callbacks. Although the variable was defined, passing it to the callback in WritePreparedTxnReadCallback was missing, which is fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5691
Differential Revision: D16767310
Pulled By: maysamyabandeh
fbshipit-source-id: 3bf53f5964a2756a66ceef7c8f6b3ac75f102f48
Summary:
The changes transaction_test to set `txn_db_options.default_write_batch_flush_threshold = 1` in order to give better test coverage for WriteUnprepared.
As part of the change, some tests had to be updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5658
Differential Revision: D16740468
Pulled By: lth
fbshipit-source-id: 3821eec20baf13917c8c1fab444332f75a509de9
Summary:
PR https://github.com/facebook/rocksdb/pull/5676 added some test coverage for `TEST_ENV_URI`, which unfortunately isn't supported in lite mode, causing some test failures for rocksdb lite. For example,
```
db/db_test_util.cc: In constructor ‘rocksdb::DBTestBase::DBTestBase(std::__cxx11::string)’:
db/db_test_util.cc:57:16: error: ‘ObjectRegistry’ has not been declared
Status s = ObjectRegistry::NewInstance()->NewSharedObject(test_env_uri,
^
```
This PR fixes these errors by excluding the new code from test functions for lite mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5686
Differential Revision: D16749000
Pulled By: miasantreble
fbshipit-source-id: e8b3088c31a78b3dffc5fe7814261909d2c3e369
Summary:
SmallestUnCommittedSeq reads two data structures, prepared_txns_ and delayed_prepared_. These two are updated in CheckPreparedAgainstMax when max_evicted_seq_ advances some prepared entires. To avoid the cost of acquiring a mutex, the read from them in SmallestUnCommittedSeq is not atomic. This creates a potential race condition.
The fix is to read the two data structures in the reverse order of their update. CheckPreparedAgainstMax copies the prepared entry to delayed_prepared_ before removing it from prepared_txns_ and SmallestUnCommittedSeq looks into prepared_txns_ before reading delayed_prepared_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5683
Differential Revision: D16744699
Pulled By: maysamyabandeh
fbshipit-source-id: b1bdb134018beb0b9de58827f512662bea35cad0
Summary:
Most existing RocksDB unit tests run on `Env::Default()`. It will be useful to port the unit tests to non-default environments, e.g. `HdfsEnv`, etc.
This pull request is one step towards this goal. If RocksDB unit tests are built with a static library exposing a function `RegisterCustomObjects()`, then it is possible to implement custom object registrar logic in the library. RocksDB unit test can call `RegisterCustomObjects()` at the beginning.
By default, `ROCKSDB_UNITTESTS_WITH_CUSTOM_OBJECTS_FROM_STATIC_LIBS` is not defined, thus this PR has no impact on existing RocksDB because `RegisterCustomObjects()` is a noop.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5676
Differential Revision: D16679157
Pulled By: riversand963
fbshipit-source-id: aca571af3fd0525277cdc674248d0fe06e060f9d
Summary:
This PR adds support in block cache trace analyzer to read from human readable trace file. This is needed when a user does not have access to the binary trace file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5679
Test Plan: USE_CLANG=1 make check -j32
Differential Revision: D16697239
Pulled By: HaoyuHuang
fbshipit-source-id: f2e29d7995816c389b41458f234ec8e184a924db
Summary:
This ports `folly::DistributedMutex` into RocksDB. The PR includes everything else needed to compile and use DistributedMutex as a component within folly. Most files are unchanged except for some portability stuff and includes.
For now, I've put this under `rocksdb/third-party`, but if there is a better folder to put this under, let me know. I also am not sure how or where to put unit tests for third-party stuff like this. It seems like gtest is included already, but I need to link with it from another third-party folder.
This also includes some other common components from folly
- folly/Optional
- folly/ScopeGuard (In particular `SCOPE_EXIT`)
- folly/synchronization/ParkingLot (A portable futex-like interface)
- folly/synchronization/AtomicNotification (The standard C++ interface for futexes)
- folly/Indestructible (For singletons that don't get destroyed without allocations)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5642
Differential Revision: D16544439
fbshipit-source-id: 179b98b5dcddc3075926d31a30f92fd064245731
Summary:
This PR adds four more eviction policies.
- OPT [1]
- Hyperbolic caching [2]
- ARC [3]
- GreedyDualSize [4]
[1] L. A. Belady. 1966. A Study of Replacement Algorithms for a Virtual-storage Computer. IBM Syst. J. 5, 2 (June 1966), 78-101. DOI=http://dx.doi.org/10.1147/sj.52.0078
[2] Aaron Blankstein, Siddhartha Sen, and Michael J. Freedman. 2017. Hyperbolic caching: flexible caching for web applications. In Proceedings of the 2017 USENIX Conference on Usenix Annual Technical Conference (USENIX ATC '17). USENIX Association, Berkeley, CA, USA, 499-511.
[3] Nimrod Megiddo and Dharmendra S. Modha. 2003. ARC: A Self-Tuning, Low Overhead Replacement Cache. In Proceedings of the 2nd USENIX Conference on File and Storage Technologies (FAST '03). USENIX Association, Berkeley, CA, USA, 115-130.
[4] N. Young. The k-server dual and loose competitiveness for paging. Algorithmica, June 1994, vol. 11,(no.6):525-41. Rewritten version of ''On-line caching as cache size varies'', in The 2nd Annual ACM-SIAM Symposium on Discrete Algorithms, 241-250, 1991.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5644
Differential Revision: D16548817
Pulled By: HaoyuHuang
fbshipit-source-id: 838f76db9179f07911abaab46c97e1c929cfcd63
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
The actual value of default write buffer size within `rocksdb/include/rocksdb/options.h` is 64 MB, we should correct this value in java doc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5670
Differential Revision: D16668815
Pulled By: maysamyabandeh
fbshipit-source-id: cc3a981c9f1c2cd4a8392b0ed5f1fd0a2d729afb
Summary:
This PR updated the python script to plot graphs for stats output from block cache analyzer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5673
Test Plan: Manually run the script to generate graphs.
Differential Revision: D16657145
Pulled By: HaoyuHuang
fbshipit-source-id: fd510b5fd4307835f9a986fac545734dbe003d28
Summary:
If a test is one of parallel tests, then it should also be one of the 'tests'.
Otherwise, `make all` won't build the binaries. For examle,
```
$COMPILE_WITH_ASAN=1 make -j32 all
```
Then if you do
```
$make check
```
The second command will invoke the compilation and building for db_bloom_test
and file_reader_writer_test **without** the `COMPILE_WITH_ASAN=1`, causing the
command to fail.
Test plan (on devserver):
```
$make -j32 all
```
Verify all binaries are built so that `make check` won't have to compile any
thing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5672
Differential Revision: D16655834
Pulled By: riversand963
fbshipit-source-id: 050131412b5313496f85ae3deeeeb8d28af75746
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
Summary:
It sometimes times out when run under valgrind taking around 20m. The patch skips the test under Valgrind.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5671
Differential Revision: D16652382
Pulled By: maysamyabandeh
fbshipit-source-id: 0f6f4f76d37337d56226b689e01b14523dd07aae
Summary:
Users may desire to specify extra dependencies via buck. This PR allows users to pass additional dependencies as a JSON object so that the buckifier script can generate TARGETS file with desired extra dependencies.
Test plan (on dev server)
```
$python buckifier/buckify_rocksdb.py '{"fake": {"extra_deps": [":test_dep", "//fakes/module:mock1"], "extra_compiler_flags": ["-DROCKSDB_LITE", "-Os"]}}'
Generating TARGETS
Extra dependencies:
{'': {'extra_compiler_flags': [], 'extra_deps': []}, 'test_dep1': {'extra_compiler_flags': ['-O2', '-DROCKSDB_LITE'], 'extra_deps': [':fake', '//dep1/mock']}}
Generated TARGETS Summary:
- 5 libs
- 0 binarys
- 296 tests
```
Verify the TARGETS file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5648
Differential Revision: D16565043
Pulled By: riversand963
fbshipit-source-id: a6ef02274174fcf159692d7b846e828454d01e89
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.
In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},
This confuses the dedup step here: https://github.com/facebook/rocksdb/blob/bb4178066dc4f18b9b7f1d371e641db027b3edbe/db/db_impl/db_impl_files.cc#L339-L345
Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.
The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603
Test Plan: make check
Differential Revision: D16413203
Pulled By: miasantreble
fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
Summary:
MergeOperatorPinningTest.Randomized frequently times out under TSAN
because it tests ~40 option configurations sequentially in a loop. The
patch parallelizes the tests of the various configurations to make the
test complete faster.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5659
Test Plan: Tested using buck test mode/dev-tsan ...
Differential Revision: D16587518
Pulled By: ltamasi
fbshipit-source-id: 65bd25c0ad9a23587fed5592e69c1a0097fa27f6
Summary:
Add savepoint support when the current transaction has flushed unprepared batches.
Rolling back to savepoint is similar to rolling back a transaction. It requires the set of keys that have changed since the savepoint, re-reading the keys at the snapshot at that savepoint, and the restoring the old keys by writing out another unprepared batch.
For this strategy to work though, we must be capable of reading keys at a savepoint. This does not work if keys were written out using the same sequence number before and after a savepoint. Therefore, when we flush out unprepared batches, we must split the batch by savepoint if any savepoints exist.
eg. If we have the following:
```
Put(A)
Put(B)
Put(C)
SetSavePoint()
Put(D)
Put(E)
SetSavePoint()
Put(F)
```
Then we will write out 3 separate unprepared batches:
```
Put(A) 1
Put(B) 1
Put(C) 1
Put(D) 2
Put(E) 2
Put(F) 3
```
This is so that when we rollback to eg. the first savepoint, we can just read keys at snapshot_seq = 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5627
Differential Revision: D16584130
Pulled By: lth
fbshipit-source-id: 6d100dd548fb20c4b76661bd0f8a2647e64477fa
Summary:
In DeferSnapshotSavePointTest, writes were failing with snapshot validation error because the key with the latest sequence number was an unprepared key from the current transaction.
Fix this by passing down the correct read callback.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5657
Differential Revision: D16582466
Pulled By: lth
fbshipit-source-id: 11645dac0e7c1374d917ef5fdf757d13c1d1108d
Summary:
In some cases, we don't have to get really accurate number. Something like 10% off is fine, we can create a new option for that use case. In this case, we can calculate size for full files first, and avoid estimation inside SST files if full files got us a huge number. For example, if we already covered 100GB of data, we should be able to skip partial dives into 10 SST files of 30MB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5609
Differential Revision: D16433481
Pulled By: elipoz
fbshipit-source-id: 5830b31e1c656d0fd3a00d7fd2678ddc8f6e601b
Summary:
Master branch had been left at 6.2 and history of 6.3 and beyond were merged. Updated this to correct.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5652
Differential Revision: D16570498
Pulled By: gfosco
fbshipit-source-id: 79f62ec570539a3e3d7d7c84a6cf7b722395fafe
Summary:
Update buckifier templates in the scripts.
Test plan (on devserver)
```
$python buckifier/buckify_rocksdb.py
```
Then
```
$git diff
```
Verify that generated TARGETS file is the same (except for indentation).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5647
Differential Revision: D16555647
Pulled By: riversand963
fbshipit-source-id: 32574a4d0e820858eab2391304dd731141719bcd
Summary:
The `TransactionTest.MultiGetBatchedTest` were failing with unprepared batches because we were not using the correct callbacks. Override MultiGet to pass down the correct ReadCallback. A similar problem is also fixed in WritePrepared.
This PR also fixes an issue similar to (https://github.com/facebook/rocksdb/pull/5147), but for MultiGet instead of Get.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5634
Differential Revision: D16552674
Pulled By: lth
fbshipit-source-id: 736eaf8e919c6b13d5f5655b1c0d36b57ad04804
Summary:
This PR optimizes the hybrid row-block cache simulator. If a Get request hits the cache, we treat all its future accesses as hits.
Consider a Get request (no snapshot) accesses multiple files, e.g, file1, file2, file3. We construct the row key as "fdnumber_key_0". Before this PR, if it hits the cache when searching the key in file1, we continue to process its accesses in file2 and file3 which is unnecessary.
With this PR, if "file1_key_0" is in the cache, we treat all future accesses of this Get request as hits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5616
Differential Revision: D16453187
Pulled By: HaoyuHuang
fbshipit-source-id: 56f3169cc322322305baaf5543226a0824fae19f
Summary:
The ssize_t type was introduced in https://github.com/facebook/rocksdb/pull/5633, but it seems like it's a POSIX specific type.
I just need a signed type to represent number of bytes, so use int64_t instead. It seems like we have a typedef from SSIZE_T for Windows, but it doesn't seem like we ever include "port/port.h" in our public header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5638
Differential Revision: D16526269
Pulled By: lth
fbshipit-source-id: 8d3a5c41003951b74b29bc5f1d949b2b22da0cee
Summary:
This test frequently times out under TSAN; reducing the number of random
iterations to make it complete faster.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5635
Test Plan: buck test mode/dev-tsan internal_repo_rocksdb/repo:compact_on_deletion_collector_test
Differential Revision: D16523505
Pulled By: ltamasi
fbshipit-source-id: 6a69909bce9d204c891150fcb3d536547b3253d0
Summary:
This PR implements cache eviction using reinforcement learning. It includes two implementations:
1. An implementation of Thompson Sampling for the Bernoulli Bandit [1].
2. An implementation of LinUCB with disjoint linear models [2].
The idea is that a cache uses multiple eviction policies, e.g., MRU, LRU, and LFU. The cache learns which eviction policy is the best and uses it upon a cache miss.
Thompson Sampling is contextless and does not include any features.
LinUCB includes features such as level, block type, caller, column family id to decide which eviction policy to use.
[1] Daniel J. Russo, Benjamin Van Roy, Abbas Kazerouni, Ian Osband, and Zheng Wen. 2018. A Tutorial on Thompson Sampling. Found. Trends Mach. Learn. 11, 1 (July 2018), 1-96. DOI: https://doi.org/10.1561/2200000070
[2] Lihong Li, Wei Chu, John Langford, and Robert E. Schapire. 2010. A contextual-bandit approach to personalized news article recommendation. In Proceedings of the 19th international conference on World wide web (WWW '10). ACM, New York, NY, USA, 661-670. DOI=http://dx.doi.org/10.1145/1772690.1772758
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5610
Differential Revision: D16435067
Pulled By: HaoyuHuang
fbshipit-source-id: 6549239ae14115c01cb1e70548af9e46d8dc21bb
Summary:
Instead of reusing `TransactionOptions::max_write_batch_size` for determining when to flush a write batch for write unprepared, add a new variable called `write_batch_flush_threshold` for this use case instead.
Also add `TransactionDBOptions::default_write_batch_flush_threshold` which sets the default value if `TransactionOptions::write_batch_flush_threshold` is unspecified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5633
Differential Revision: D16520364
Pulled By: lth
fbshipit-source-id: d75ae5a2141ce7708982d5069dc3f0b58d250e8c
Summary:
This test frequently times out under TSAN; parallelizing it should fix
this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5632
Test Plan:
make check
buck test mode/dev-tsan internal_repo_rocksdb/repo:db_bloom_filter_test
Differential Revision: D16519399
Pulled By: ltamasi
fbshipit-source-id: 66e05a644d6f79c6d544255ffcf6de195d2d62fe
Summary:
Transaction::RollbackToSavePoint undos the modification made since the SavePoint beginning, and also unlocks the corresponding keys, which are tracked in the last SavePoint. Currently ::PopSavePoint simply discard these tracked keys, leaving them locked in the lock manager. This breaks a subsequent ::RollbackToSavePoint behavior as it loses track of such keys, and thus cannot unlock them. The patch fixes ::PopSavePoint by passing on the track key information to the previous SavePoint.
Fixes https://github.com/facebook/rocksdb/issues/5618
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5628
Differential Revision: D16505325
Pulled By: lth
fbshipit-source-id: 2bc3b30963ab4d36d996d1f66543c93abf358980
Summary:
current `clean` target in Makefile does not remove parallel test
binaries. Fix this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5629
Test Plan:
(on devserver)
Take file_reader_writer_test for instance.
```
$make -j32 file_reader_writer_test
$make clean
```
Verify that binary file 'file_reader_writer_test' is delete by `make clean`.
Differential Revision: D16513176
Pulled By: riversand963
fbshipit-source-id: 70acb9f56c928a494964121b86aacc0090f31ff6
Summary:
The new DB::GetApproximateSizes with SizeApproximationOptions argument, which allows to add more options/knobs to the DB::GetApproximateSizes call (beyond only the include_flags)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5626
Differential Revision: D16496913
Pulled By: elipoz
fbshipit-source-id: ee8c6c182330a285fa056ecfc3905a592b451720
Summary:
In previous https://github.com/facebook/rocksdb/issues/5079, we added user-specified timestamp to `DB::Get()` and `DB::Put()`. Limitation is that these two functions may cause extra memory allocation and key copy. The reason is that `WriteBatch` does not allocate extra memory for timestamps because it is not aware of timestamp size, and we did not provide an API to assign/update timestamp of each key within a `WriteBatch`.
We address these issues in this PR by doing the following.
1. Add a `timestamp_size_` to `WriteBatch` so that `WriteBatch` can take timestamps into account when calling `WriteBatch::Put`, `WriteBatch::Delete`, etc.
2. Add APIs `WriteBatch::AssignTimestamp` and `WriteBatch::AssignTimestamps` so that application can assign/update timestamps for each key in a `WriteBatch`.
3. Avoid key copy in `GetImpl` by adding new constructor to `LookupKey`.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
If the API extension looks good, I will add more unit tests.
Some simple benchmark using db_bench.
```
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000 -disable_wal=true
```
Master is at a78503bd6c.
```
| | readrandom | fillrandom |
| master | 15.53 MB/s | 25.97 MB/s |
| PR5502 | 16.70 MB/s | 25.80 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5502
Differential Revision: D16340894
Pulled By: riversand963
fbshipit-source-id: 51132cf792be07d1efc3ac33f5768c4ee2608bb8
Summary:
Make rocksdb build on macos:
1) Reorganize OS-specific flags and deps in rocksdb/src/TARGETS
2) Sandbox fbcode apple platform builds from repo root include path (which conflicts
with layout of rocksdb headers).
3) Fix dep-translation for bzip2.
Reviewed By: andrewjcg
Differential Revision: D15125826
fbshipit-source-id: 8e143c689b88b5727e54881a5e80500f879a320b
Summary:
The ::snap_refresh_nanos option is incompatible with DeleteRange feature. Currently the code relies on range_del_agg.IsEmpty() to disable it if there are range delete tombstones. However ::IsEmpty does not guarantee that there is no RangeDelete tombstones in the SST files. The patch declares the two features incompatible in inline comments until we later figure how to properly detect the presence of RangeDelete tombstones in compaction inputs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5625
Differential Revision: D16468218
Pulled By: maysamyabandeh
fbshipit-source-id: bd7beca278bc7e1db75e7ee4522d05a3a6ca86f4
Summary:
AutoRollLogger sets GetStatus() to be non-OK if the log file fails to be created and logger_ is set to null. It is left to the caller to check the status before calling function to this class. There is no harm to create another null checking to logger_ before we using it, so that in case users mis-use the logger, they don't get a segfault.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5623
Test Plan: Run all existing tests.
Differential Revision: D16466251
fbshipit-source-id: 262b885eec28bf741d91e9191c3cb5ff964e1bce
Summary:
Auto roll logger fails to handle file creation error in the correct way, which may expose to seg fault condition to users. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5622
Test Plan: Add a unit test on creating file under a non-existing directory. The test fails without the fix.
Differential Revision: D16460853
fbshipit-source-id: e96da4bef4f16db171ea04a11b2ec5a9448ddbde
Summary:
Simplify WriteUnpreparedTxnReadCallback so we just have one function `CalcMaxVisibleSeq`. Also, there's no need for the read callback to hold onto the transaction any more, so just hold the set of unprep_seqs, reducing about of indirection in `IsVisibleFullCheck`.
Also, some comments about using transaction snapshot were out of date, so remove them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5621
Differential Revision: D16459883
Pulled By: lth
fbshipit-source-id: cd581323fd18982e817d99af57b6eaba59e599bb
Summary:
The ObjectRegistry class replaces the Registrar and NewCustomObjects. Objects are registered with the registry by Type (the class must implement the static const char *Type() method).
This change is necessary for a few reasons:
- By having a class (rather than static template instances), the class can be passed between compilation units, meaning that objects could be registered and shared from a dynamic library with an executable.
- By having a class with instances, different units could have different objects registered. This could be useful if, for example, one Option allowed for a dynamic library and one did not.
When combined with some other PRs (being able to load shared libraries, a Configurable interface to configure objects to/from string), this code will allow objects in external shared libraries to be added to a RocksDB image at run-time, rather than requiring every new extension to be built into the main library and called explicitly by every program.
Test plan (on riversand963's devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all && sleep 1 && make check
```
All tests pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5293
Differential Revision: D16363396
Pulled By: riversand963
fbshipit-source-id: fbe4acb615bfc11103eef40a0b288845791c0180
Summary:
RocksDB has historically stored uncompression dictionary objects in the block
cache as opposed to storing just the block contents. This neccesitated
evicting the object upon table close. With the new code, only the raw blocks
are stored in the cache, eliminating the need for eviction.
In addition, the patch makes the following improvements:
1) Compression dictionary blocks are now prefetched/pinned similarly to
index/filter blocks.
2) A copy operation got eliminated when the uncompression dictionary is
retrieved.
3) Errors related to retrieving the uncompression dictionary are propagated as
opposed to silently ignored.
Note: the patch temporarily breaks the compression dictionary evicition stats.
They will be fixed in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584
Test Plan: make asan_check
Differential Revision: D16344151
Pulled By: ltamasi
fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b
Summary:
1. Avoid creating the iterator in order to call BlockBasedTable::ApproximateOffsetOf(). Instead, directly call into it.
2. Optimize BlockBasedTable::ApproximateOffsetOf() keeps the index block iterator in stack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5613
Differential Revision: D16442660
Pulled By: elipoz
fbshipit-source-id: 9320be3e918c139b10e758cbbb684706d172e516
Summary:
Right now, ldb cannot scan a DB with merge operands with default ldb. There is no hard to give a general merge operator so that it can at least print out something
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5607
Test Plan: Run ldb against a DB with merge operands and see the outputs.
Differential Revision: D16442634
fbshipit-source-id: c66c414ec07f219cfc6e6ec2cc14c783ee95df54
Summary:
There are a number of fixes in this PR (with most bugs found via the added stress tests):
1. Re-enable reseek optimization. This was initially disabled to avoid infinite loops in https://github.com/facebook/rocksdb/pull/3955 but this can be resolved by remembering not to reseek after a reseek has already been done. This problem only affects forward iteration in `DBIter::FindNextUserEntryInternal`, as we already disable reseeking in `DBIter::FindValueForCurrentKeyUsingSeek`.
2. Verify that ReadOption.snapshot can be safely used for iterator creation. Some snapshots would not give correct results because snaphsot validation would not be enforced, breaking some assumptions in Prev() iteration.
3. In the non-snapshot Get() case, reads done at `LastPublishedSequence` may not be enough, because unprepared sequence numbers are not published. Use `std::max(published_seq, max_visible_seq)` to do lookups instead.
4. Add stress test to test reading own writes.
5. Minor bug in the allow_concurrent_memtable_write case where we forgot to pass in batch_per_txn_.
6. Minor performance optimization in `CalcMaxUnpreparedSequenceNumber` by assigning by reference instead of value.
7. Add some more comments everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5573
Differential Revision: D16276089
Pulled By: lth
fbshipit-source-id: 18029c944eb427a90a87dee76ac1b23f37ec1ccb
Summary:
There are concerns about the correctness of this patch. Disabling by default until the concerns are resolved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5606
Differential Revision: D16428064
Pulled By: maysamyabandeh
fbshipit-source-id: a89280f0ea85796c9c9dfbfd9a8e91dad9b000b3
Summary:
Right now, users cannot take advantage of row cache, unless no snapshot is used, or Get() is repeated for the same snapshots. This limits the usage of row cache.
This change eliminate this restriction in some cases. If the snapshot used is newer than the largest sequence number in the file, and write callback function is not registered, the same row cache key is used as no snapshot is given. We still need the callback function restriction for now because the callback function may filter out different keys for different snapshots even if the snapshots are new.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5600
Test Plan: Add a unit test.
Differential Revision: D16386616
fbshipit-source-id: 6b7d214bd215d191b03ccf55926ad4b703ec2e53
Summary:
- Compute correlation between a few features and predictions, e.g., number of accesses since the last access vs number of accesses till the next access on a block.
- Output human readable trace file so python can consume it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5596
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16373200
Pulled By: HaoyuHuang
fbshipit-source-id: c848d26bc2e9210461f317d7dbee42d55be5a0cc
Summary:
Atomic flush test started to fail after https://github.com/facebook/rocksdb/issues/5099. Then https://github.com/facebook/rocksdb/issues/5278 provided a fix after
which the same error occurred much less frequently. However it still occur
occasionally. Not sure what the root cause is. This PR disables the feature of
snapshot list refresh, and we should keep an eye on the failure in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5581
Differential Revision: D16295985
Pulled By: riversand963
fbshipit-source-id: c9e62e65133c52c21b07097de359632ca62571e4
Summary:
Added .watchmanconfig file to rocksdb repo. It is currently .gitignored.
This allows to auto sync modified files with watchman when editing them remotely.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5593
Differential Revision: D16363860
Pulled By: elipoz
fbshipit-source-id: 5ae221e21c6c757ceb08877771550d508f773d55
Summary:
Added log_readahead_size option to control prefetching for Log::Reader.
This is mostly useful for reading a remotely located log, as it can save the number of round-trips when reading it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5592
Differential Revision: D16362989
Pulled By: elipoz
fbshipit-source-id: c5d4d5245a44008cd59879640efff70c091ad3e8
Summary:
ldb idump now only works for default column family. Extend it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5594
Test Plan: Compile and run the tool against a multiple CF DB.
Differential Revision: D16380684
fbshipit-source-id: bfb8af36fdad1806837c90aaaab492d71528aceb
Summary:
Fixing a corner case crash when there was no data read from file, but status is still OK
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5586
Differential Revision: D16348117
Pulled By: elipoz
fbshipit-source-id: f97973308024f020d8be79ca3c56466b84d80656
Summary:
This PR traces the referenced key for Get for all types of blocks. This is useful when evaluating hybrid row-block caches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5548
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16157979
Pulled By: HaoyuHuang
fbshipit-source-id: f6327411c9deb74e35e22a35f66cdbae09ab9d87
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
Crc32c Parallel computation optimization:
Algorithm comes from Intel whitepaper: [crc-iscsi-polynomial-crc32-instruction-paper](https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/crc-iscsi-polynomial-crc32-instruction-paper.pdf)
Input data is divided into three equal-sized blocks
Three parallel blocks (crc0, crc1, crc2) for 1024 Bytes
One Block: 42(BLK_LENGTH) * 8(step length: crc32c_u64) bytes
1. crc32c_test:
```
[==========] Running 4 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 4 tests from CRC
[ RUN ] CRC.StandardResults
[ OK ] CRC.StandardResults (1 ms)
[ RUN ] CRC.Values
[ OK ] CRC.Values (0 ms)
[ RUN ] CRC.Extend
[ OK ] CRC.Extend (0 ms)
[ RUN ] CRC.Mask
[ OK ] CRC.Mask (0 ms)
[----------] 4 tests from CRC (1 ms total)
[----------] Global test environment tear-down
[==========] 4 tests from 1 test case ran. (1 ms total)
[ PASSED ] 4 tests.
```
2. RocksDB benchmark: db_bench --benchmarks="crc32c"
```
Linear Arm crc32c:
crc32c: 1.005 micros/op 995133 ops/sec; 3887.2 MB/s (4096 per op)
```
```
Parallel optimization with Armv8 crypto extension:
crc32c: 0.419 micros/op 2385078 ops/sec; 9316.7 MB/s (4096 per op)
```
It gets ~2.4x speedup compared to linear Arm crc32c instructions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5494
Differential Revision: D16340806
fbshipit-source-id: 95dae9a5b646fd20a8303671d82f17b2e162e945
Summary:
The 'refs' field in LRUHandle now counts only external references, since anyway we already have the IN_CACHE flag. This simplifies reference accounting logic a bit. Also cleaned up few asserts code as well as the comments - to be more readable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5579
Differential Revision: D16286747
Pulled By: elipoz
fbshipit-source-id: 7186d88f80f512ce584d0a303437494b5cbefd7f
Summary:
Added support for sequential read-ahead file that can prefetch the read data and later serve it from internal cache buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5580
Differential Revision: D16287082
Pulled By: elipoz
fbshipit-source-id: a3e7ad9643d377d39352ff63058ce050ec31dcf3
Summary:
RandomAccessFileReader.for_compaction_ doesn't seem to be used anymore. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5572
Test Plan: USE_CLANG=1 make all check -j
Differential Revision: D16286178
fbshipit-source-id: aa338049761033dfbe5e8b1707bbb0be2df5be7e
Summary:
Currently, we are tracking keys we need to rollback via a separate structure specific to WriteUnprepared in write_set_keys_.
We already have a data structure called tracked_keys_ used to track which keys to unlock on transaction termination. This is exactly what we want, since we should only rollback keys that we have locked anyway.
Save some memory by reusing that data structure instead of making our own.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5562
Differential Revision: D16206484
Pulled By: lth
fbshipit-source-id: 5894d2b824a4b19062d84adbd6e6e86f00047488
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
Summary:
`wal_batch.writeBatchPtr.release()` gives up the ownership of the original `WriteBatch`, but there is no new owner, which causes memory leak.
The patch is simple. Removing `release()` prevent ownership change. `std::move` is for speed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5515
Differential Revision: D16264281
Pulled By: riversand963
fbshipit-source-id: 51c556b7a1c977325c3aa24acb636303847151fa
Summary:
When 'HAVE_ARM64_CRC' is set, the blew methods:
- bool rocksdb::crc32c::isSSE42()
- bool rocksdb::crc32c::isPCLMULQDQ()
are defined but not used, the unused-function is raised
when do rocksdb build.
This patch try to cleanup these warnings by add ifndef,
if it build under the HAVE_ARM64_CRC, we will not define
`isSSE42` and `isPCLMULQDQ`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5565
Differential Revision: D16233654
fbshipit-source-id: c32a9dda7465dbf65f9ccafef159124db92cdffd
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5563
Test Plan: Manually run the script on files generated by block_cache_trace_analyzer.
Differential Revision: D16214400
Pulled By: HaoyuHuang
fbshipit-source-id: 94485eed995e9b2b63e197c5dfeb80129fa7897f
Summary:
- Provide assignment operator in CompactionStats
- Provide a copy constructor for FileDescriptor
- Remove std::move from "return std::move(t)" in BoundedQueue
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5553
Differential Revision: D16230170
fbshipit-source-id: fd7c6e52390b2db1be24141e25649cf62424d078
Summary:
This PR adds a ghost cache for admission control. Specifically, it admits an entry on its second access.
It also adds a hybrid row-block cache that caches the referenced key-value pairs of a Get/MultiGet request instead of its blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5534
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16101124
Pulled By: HaoyuHuang
fbshipit-source-id: b99edda6418a888e94eb40f71ece45d375e234b1
Summary:
Add an extra cleanup step so that db directory can be saved and uploaded.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5554
Reviewed By: yancouto
Differential Revision: D16168844
Pulled By: riversand963
fbshipit-source-id: ec7b2cee5f11c7d388c36531f8b076d648e2fb19
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
When atomic flush stress test fails, we print internal keys within the range with mismatched key/values for all column families.
Test plan (on devserver)
Manually hack the code to randomly insert wrong data. Run the test.
```
$make clean && COMPILE_WITH_TSAN=1 make -j32 db_stress
$./db_stress -test_atomic_flush=true -ops_per_thread=10000
```
Check that proper error messages are printed, as follows:
```
2019/07/08-17:40:14 Starting verification
Verification failed
Latest Sequence Number: 190903
[default] 000000000000050B => 56290000525350515E5F5C5D5A5B5859
[3] 0000000000000533 => EE100000EAEBE8E9E6E7E4E5E2E3E0E1FEFFFCFDFAFBF8F9
Internal keys in CF 'default', [000000000000050B, 0000000000000533] (max 8)
key 000000000000050B seq 139920 type 1
key 0000000000000533 seq 0 type 1
Internal keys in CF '3', [000000000000050B, 0000000000000533] (max 8)
key 0000000000000533 seq 0 type 1
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5549
Differential Revision: D16158709
Pulled By: riversand963
fbshipit-source-id: f07fa87763f87b3bd908da03c956709c6456bcab
Summary:
Right now ldb can open running DB through read-only DB. However, it might leave info logs files to the read-only DB directory. Add an option to open the DB as secondary to avoid it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5537
Test Plan:
Run
./ldb scan --max_keys=10 --db=/tmp/rocksdbtest-2491/dbbench --secondary_path=/tmp --no_value --hex
and
./ldb get 0x00000000000000103030303030303030 --hex --db=/tmp/rocksdbtest-2491/dbbench --secondary_path=/tmp
against a normal db_bench run and observe the output changes. Also observe that no new info logs files are created under /tmp/rocksdbtest-2491/dbbench.
Run without --secondary_path and observe that new info logs created under /tmp/rocksdbtest-2491/dbbench.
Differential Revision: D16113886
fbshipit-source-id: 4e09dec47c2528f6ca08a9e7a7894ba2d9daebbb
Summary:
https://github.com/facebook/rocksdb/pull/5520 caused a buffer overflow bug in DBWALTest.kTolerateCorruptedTailRecords. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5550
Test Plan: Run the test in UBSAN. It used to fail. Not it succeeds.
Differential Revision: D16165516
fbshipit-source-id: 42c56a6bc64eb091f054b87757fcbef60da825f7
Summary:
Print out some more information when db_tress fails with verification failures to help debugging problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5543
Test Plan:
Manually ingest some failures and observe the outputs are like this:
Verification failed
[default] 0000000000199A5A => 7C3D000078797A7B74757677707172736C6D6E6F68696A6B
[6] 000000000019C8BD => 65380000616063626D6C6F6E69686B6A
internal keys in default CF [0000000000199A5A, 000000000019C8BD] (max 8)
key 0000000000199A5A seq 179246 type 1
key 000000000019C8BD seq 163970 type 1
Lastest Sequence Number: 292234
Differential Revision: D16153717
fbshipit-source-id: b33fa50a828c190cbf8249a37955432044f92daf
Summary:
Previously `GetAllKeyVersions()` supports default column family only. This PR add support for other column families.
Test plan (devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 db_basic_test
$./db_basic_test --gtest_filter=DBBasicTest.GetAllKeyVersions
```
All other unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5544
Differential Revision: D16147551
Pulled By: riversand963
fbshipit-source-id: 5a61aece2a32d789e150226a9b8d53f4a5760168
Summary:
1. Cleanup WAL trash files on open
2. Don't apply deletion rate limit if WAL dir is different from db dir
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5520
Test Plan: Add new unit tests and make check
Differential Revision: D16096750
Pulled By: anand1976
fbshipit-source-id: 6f07858ad864b754b711db416f0389c45ede599b
Summary:
clang analyze fails after https://github.com/facebook/rocksdb/pull/5514 for this failure:
table/block_based/block_based_table_reader.cc:3450:16: warning: Called C++ object pointer is null
if (!get_context->SaveValue(
^~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
The reaon is that a branching is added earlier in the function on get_context is null or not, CLANG analyze thinks that it can be null and we make the function call withou the null checking.
Fix the issue by removing the branch and add an assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5542
Test Plan: "make all check" passes and CLANG analyze failure goes away.
Differential Revision: D16133988
fbshipit-source-id: d4627d03c4746254cc11926c523931086ccebcda
Summary:
Since https://github.com/facebook/rocksdb/issues/5468 `LevelIterator` compare lower bound and file smallest key on `NewFileIterator` and cache the result to reduce per key lower bound check. However when iterate across file boundary, it doesn't update the cached result since `Valid()=false` because `Valid()` still reflect the status of the previous file iterator. Fixing it by remove the `Valid()` check from `CheckMayBeOutOfLowerBound()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5540
Test Plan:
See the new test.
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D16127653
fbshipit-source-id: a0691e1164658d485c17971aaa97028812f74678
Summary:
Sometimes it is helpful to fetch the whole history of stats after benchmark runs. Add such an option
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5532
Test Plan: Run the benchmark manually and observe the output is as expected.
Differential Revision: D16097764
fbshipit-source-id: 10b5b735a22a18be198b8f348be11f11f8806904
Summary:
This PR associates a unique id with Get and MultiGet. This enables us to track how many blocks a Get/MultiGet request accesses. We can also measure the impact of row cache vs block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5514
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16032681
Pulled By: HaoyuHuang
fbshipit-source-id: 775b05f4440badd58de6667e3ec9f4fc87a0af4c
Summary:
Previously, if the jemalloc was built with nonempty string for
`--with-jemalloc-prefix`, then `HasJemalloc()` would return false on
Linux, so jemalloc would not be used at runtime. On Mac, it would cause
a linker failure due to no definitions found for the weak functions
declared in "port/jemalloc_helper.h". This should be a rare problem
because (1) on Linux the default `--with-jemalloc-prefix` value is the
empty string, and (2) Homebrew's build explicitly sets
`--with-jemalloc-prefix` to the empty string.
However, there are cases where `--with-jemalloc-prefix` is nonempty.
For example, when building jemalloc from source on Mac, the default
setting is `--with-jemalloc-prefix=je_`. Such jemalloc builds should be
usable by RocksDB.
The fix is simple. Defining `JEMALLOC_MANGLE` before including
"jemalloc.h" causes it to define unprefixed symbols that are aliases for
each of the prefixed symbols. Thanks to benesch for figuring this out
and explaining it to me.
Fixes https://github.com/facebook/rocksdb/issues/1462.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5521
Test Plan:
build jemalloc with prefixed symbols:
```
$ ./configure --with-jemalloc-prefix=lol
$ make
```
compile rocksdb against it:
```
$ WITH_JEMALLOC_FLAG=1 JEMALLOC=1 EXTRA_LDFLAGS="-L/home/andrew/jemalloc/lib/" EXTRA_CXXFLAGS="-I/home/andrew/jemalloc/include/" make -j12 ./db_bench
```
run db_bench and verify jemalloc actually used:
```
$ ./db_bench -benchmarks=fillrandom -statistics=true -dump_malloc_stats=true -stats_dump_period_sec=1
$ grep jemalloc /tmp/rocksdbtest-1000/dbbench/LOG
2019/06/29-12:20:52.088658 7fc5fb7f6700 [_impl/db_impl.cc:837] ___ Begin jemalloc statistics ___
...
```
Differential Revision: D16092758
fbshipit-source-id: c2c358346190ed62ceb2a3547a6c4c180b12f7c4
Summary:
Recent commit 3886dddc3b introduced a new test which is not compatible with lite mode and breaks contrun test:
```
[ RUN ] StatsHistoryTest.ForceManualFlushStatsCF
monitoring/stats_history_test.cc:642: Failure
Expected: (cfd_stats->GetLogNumber()) < (cfd_test->GetLogNumber()), actual: 15 vs 15
```
This PR excludes the test from lite mode to appease the failing test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5529
Differential Revision: D16080892
Pulled By: miasantreble
fbshipit-source-id: 2f8a22758f71250cd9f204046404226ddc13b028
Summary:
Formatting fixes in db_bench_tool that were accidentally omitted
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5525
Test Plan: Unit tests
Differential Revision: D16078516
Pulled By: elipoz
fbshipit-source-id: bf8df0e3f08092a91794ebf285396d9b8a335bb9
Summary:
This is to prevent bg flush thread from unrefing and deleting the cfd that has been dropped by a concurrent thread.
Before RocksDB calls `DBImpl::WaitForFlushMemTables`, we should increase the refcount of each `ColumnFamilyData` so that its ref count will not drop to 0 even if the column family is dropped by another thread. Otherwise the bg flush thread can deref the cfd and deletes it, causing a segfault in `WaitForFlushMemtables` upon accessing `cfd`.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5513
Differential Revision: D16062898
Pulled By: riversand963
fbshipit-source-id: 37dc511f1dc99f036d0201bbd7f0a8f5677c763d
Summary:
This PR creates cache_simulator.h file. It contains a CacheSimulator that runs against a block cache trace record. We can add alternative cache simulators derived from CacheSimulator later. For example, this PR adds a PrioritizedCacheSimulator that inserts filter/index/uncompressed dictionary blocks with high priority.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5517
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16043689
Pulled By: HaoyuHuang
fbshipit-source-id: 65f28ed52b866ffb0e6eceffd7f9ca7c45bb680d
Summary:
WAL records RocksDB writes to all column families. When user flushes a a column family, the old WAL will not accept new writes but cannot be deleted yet because it may still contain live data for other column families. (See https://github.com/facebook/rocksdb/wiki/Write-Ahead-Log#life-cycle-of-a-wal for detailed explanation)
Because of this, if there is a column family that receive very infrequent writes and no manual flush is called for it, it could prevent a lot of WALs from being deleted. PR https://github.com/facebook/rocksdb/pull/5046 introduced persistent stats column family which is a good example of such column families. Depending on the config, it may have long intervals between writes, and user is unaware of it which makes it difficult to call manual flush for it.
This PR addresses the problem for persistent stats column family by forcing a flush for persistent stats column family when 1) another column family is flushed 2) persistent stats column family's log number is the smallest among all column families, this way persistent stats column family will keep advancing its log number when necessary, allowing RocksDB to delete old WAL files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5509
Differential Revision: D16045896
Pulled By: miasantreble
fbshipit-source-id: 286837b633e988417f0096ff38384742d3b40ef4
Summary:
Enhancement to MultiGet batching to read data blocks required for keys in a batch in parallel from disk. It uses Env::MultiRead() API to read multiple blocks and reduce latency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5464
Test Plan:
1. make check
2. make asan_check
3. make asan_crash
Differential Revision: D15911771
Pulled By: anand1976
fbshipit-source-id: 605036b9af0f90ca0020dc87c3a86b4da6e83394
Summary:
This PR is needed for integration into MyRocks. A second call on StartTrace returns Busy so that MyRocks may return an error to the user.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5519
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16055476
Pulled By: HaoyuHuang
fbshipit-source-id: a51772fb0965c873922757eb470a332b1e02a91d
Summary:
`create_column_family` cmd already exists but was somehow missed in the help message.
also add `drop_column_family` cmd which can drop a cf without opening db.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5503
Test Plan: Updated existing ldb_test.py to test deleting a column family.
Differential Revision: D16018414
Pulled By: lightmark
fbshipit-source-id: 1fc33680b742104fea86b10efc8499f79e722301
Summary:
Mid-point insertion is a useful feature and is mature now. Make it default. Also changed cache_index_and_filter_blocks_with_high_priority=true as default accordingly, so that we won't evict index and filter blocks easier after the change, to avoid too many surprises to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5508
Test Plan: Run all existing tests.
Differential Revision: D16021179
fbshipit-source-id: ce8456e8d43b3bfb48df6c304b5290a9d19817eb
Summary:
Add C binding for secondary instance as well as unit test.
Test plan (on devserver)
```
$make clean && COMPILE_WITH_ASAN=1 make -j20 all
$./c_test
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5505
Differential Revision: D16000043
Pulled By: riversand963
fbshipit-source-id: 3361ef6bfdf4ce12438cee7290a0ac203b5250bd
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
This PR adds a feature in block cache trace analysis tool to write statistics into csv files.
1. The analysis tool supports grouping the number of accesses per second by various labels, e.g., block, column family, block type, or a combination of them.
2. It also computes reuse distance and reuse interval.
Reuse distance: The cumulated size of unique blocks read between two consecutive accesses on the same block.
Reuse interval: The time between two consecutive accesses on the same block.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5490
Differential Revision: D15901322
Pulled By: HaoyuHuang
fbshipit-source-id: b5454fea408a32757a80be63de6fe1c8149ca70e
Summary:
There is a compile error on Windows with MSVC in malloc_stats.cc where malloc_stats_print is referenced. The compiler only knows je_malloc_stats_print from jemalloc.h. Adding JEMALLOC_NO_RENAME replaces malloc_stats_print with je_malloc_stats_print.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5470
Differential Revision: D15978720
fbshipit-source-id: c05757a2e89e2e015a661d9626c352e4f32f97e4
Summary:
As [BlockBasedTableConfig setBlockCacheSize()](https://github.com/facebook/rocksdb/blob/1966a7c055f6e182d627275051f5c09441aa922d/java/src/main/java/org/rocksdb/BlockBasedTableConfig.java#L728) said, If cacheSize is non-positive, then cache will not be used. but when we configure a negative number or 0, there is an unexpected result: the block cache becomes 8M.
- Allow 0 as a valid size. When block cache size is 0, an 8MB block cache is created, as it is the default C++ API behavior. Also updated the comment.
- Set no_block_cache true if negative value is passed to block cache size, and no block cache will be created.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5465
Differential Revision: D15968788
Pulled By: sagar0
fbshipit-source-id: ee02d6e95841c9e2c316a64bfdf192d46ff5638a
Summary:
This adds some compression dependencies to AppVeyor CI (those whose builds can be easily scripted on Windows, i.e. Snappy, LZ4, and ZStd).
Let's see if the CI passes ;-)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5226
Differential Revision: D15967223
fbshipit-source-id: 0914c613ac358cbb248df75cdee8099e836828dc
Summary:
It it not safe to assume application had sync the SST file before ingest it into DB. Also the directory to put the ingested file needs to be fsync, otherwise the file can be lost. For integrity of RocksDB we need to sync the ingested file and directory before apply the change to manifest.
Also syncing after writing global sequence when write_global_seqno=true was removed in https://github.com/facebook/rocksdb/issues/4172. Adding it back.
Fixes https://github.com/facebook/rocksdb/issues/5287.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5435
Test Plan:
Test ingest file with ldb command and observe fsync/fdatasync in strace output. Tried both move_files=true and move_files=false.
https://gist.github.com/yiwu-arbug/650a4023f57979056d83485fa863bef9
More test suggestions are welcome.
Differential Revision: D15941675
Pulled By: riversand963
fbshipit-source-id: 389533f3923065a96df2cdde23ff4724a1810d78
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
~DBWithTTLImpl() fails after calling Close() function (will invoke the
Close() function of DBImpl), because the Close() function deletes
default_cf_handle_ which is used in the GetOptions() function called
in ~DBWithTTLImpl(), hence lead to segfault.
Fix by creating a Close() function for the DBWithTTLImpl class and do
the close and the work originally in ~DBWithTTLImpl(). If the Close()
function is not called, it will be called in the ~DBWithTTLImpl()
function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5485
Test Plan: make clean; USE_CLANG=1 make all check -j
Differential Revision: D15924498
fbshipit-source-id: 567397fb972961059083a1ae0f9f99ff74872b78
Summary:
`Block::restart_index_`, `Block::restarts_`, and `Block::current_` are defined as uint32_t but `BlockBasedTableOptions::block_size` is defined as a size_t so user might see corruption as in https://github.com/facebook/rocksdb/issues/5486.
This PR adds a check in `BlockBasedTableFactory::SanitizeOptions` to disallow such configurations.
yiwu-arbug
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5492
Differential Revision: D15914047
Pulled By: miasantreble
fbshipit-source-id: c943f153d967e15aee7f2795730ab8259e2be201
Summary:
The usage of `AlignedBuffer` in env_encryption.cc writes and reads to/from the AlignedBuffer's internal buffer directly without going through AlignedBuffer's APIs (like `Append` and `Read`), causing encapsulation to break in some cases. The writes are especially problematic as after the data is written to the buffer (directly using either memmove or memcpy), the size of the buffer is not updated ... causing the AlignedBuffer to lose track of the encapsulated buffer's current size.
Fixed this by updating the buffer size after every write.
Todo for later:
Add an overloaded method to AlignedBuffer to support a memmove in addition to a memcopy. Encryption env does a memmove, and hence I couldn't switch to using `AlignedBuffer.Append()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5396
Test Plan: `make check`
Differential Revision: D15764756
Pulled By: sagar0
fbshipit-source-id: 2e24b52bd3b4b5056c5c1da157f91ddf89370183
Summary:
Make the generics of the Options interfaces more strict so they are usable in a Kotlin Multiplatform expect/actual typealias implementation without causing a Violation of Finite Bound Restriction.
This fix would enable the creation of a generic Kotlin multiplatform library by just typealiasing the JVM implementation to the current Java implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5461
Differential Revision: D15903288
Pulled By: sagar0
fbshipit-source-id: 75e83fdf5d2fcede40744a17e767563d6a4b0696
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
When tailing the WAL with TransactionLogIterator, it used to return Corruption status to indicate that the WAL has new tail that is not visible to the iterator, which is a misleading status. The patch replaces it with TryAgain which is more descriptive of a status, indicating that the user needs to create a new iterator to fetch the recent tail.
Fixes https://github.com/facebook/rocksdb/issues/5455
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5474
Differential Revision: D15898953
Pulled By: maysamyabandeh
fbshipit-source-id: 40966f6457cb539e1aeb104daeada6b0e46059fc
Summary:
The patch brings the semantics of per-block-type read performance
context counters in sync with the generic block_read_count by only
incrementing the counter if the block was actually read from the file.
It also fixes index_block_read_count, which fell victim to the
refactoring in PR https://github.com/facebook/rocksdb/issues/5298.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5484
Test Plan: Extended the unit tests.
Differential Revision: D15887431
Pulled By: ltamasi
fbshipit-source-id: a3889759d0ac5759d56625d692cd828d1b9207a6
Summary:
sprintf is unsafe and has buffer overrun risk. Replace it with the safer version snprintf where buffer size is supplied to avoid overrun.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5475
Differential Revision: D15879481
Pulled By: sagar0
fbshipit-source-id: 7ae1958ffc9727fa50261dfbb98ddd74e70a72d8
Summary:
PR https://github.com/facebook/rocksdb/issues/5298 subtly changed how read options are applied to the index block
during a Get, MultiGet, or iteration. Earlier, only the read_tier option
applied to the index block read; since PR https://github.com/facebook/rocksdb/issues/5298, fill_cache and
verify_checksums also have an effect. This patch restores the earlier
behavior to prevent surprise memory increases for clients due to the
index block not being cached.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5481
Test Plan: make check
Differential Revision: D15883082
Pulled By: ltamasi
fbshipit-source-id: 9a065ec3a6db5a365cf6dd5e95190a20c5756356
Facebook has adopted a Code of Conduct that we expect project participants to adhere to. Please [read the full text](https://code.facebook.com/codeofconduct) so that you can understand what actions will and will not be tolerated.
## Our Pledge
In the interest of fostering an open and welcoming environment, we as
contributors and maintainers pledge to make participation in our project and
our community a harassment-free experience for everyone, regardless of age, body
size, disability, ethnicity, sex characteristics, gender identity and expression,
level of experience, education, socio-economic status, nationality, personal
appearance, race, religion, or sexual identity and orientation.
## Our Standards
Examples of behavior that contributes to creating a positive environment
include:
* Using welcoming and inclusive language
* Being respectful of differing viewpoints and experiences
* Gracefully accepting constructive criticism
* Focusing on what is best for the community
* Showing empathy towards other community members
Examples of unacceptable behavior by participants include:
* The use of sexualized language or imagery and unwelcome sexual attention or
advances
* Trolling, insulting/derogatory comments, and personal or political attacks
* Public or private harassment
* Publishing others' private information, such as a physical or electronic
address, without explicit permission
* Other conduct which could reasonably be considered inappropriate in a
professional setting
## Our Responsibilities
Project maintainers are responsible for clarifying the standards of acceptable
behavior and are expected to take appropriate and fair corrective action in
response to any instances of unacceptable behavior.
Project maintainers have the right and responsibility to remove, edit, or
reject comments, commits, code, wiki edits, issues, and other contributions
that are not aligned to this Code of Conduct, or to ban temporarily or
permanently any contributor for other behaviors that they deem inappropriate,
threatening, offensive, or harmful.
## Scope
This Code of Conduct applies within all project spaces, and it also applies when
an individual is representing the project or its community in public spaces.
Examples of representing a project or community include using an official
project e-mail address, posting via an official social media account, or acting
as an appointed representative at an online or offline event. Representation of
a project may be further defined and clarified by project maintainers.
## Enforcement
Instances of abusive, harassing, or otherwise unacceptable behavior may be
reported by contacting the project team at <opensource-conduct@fb.com>. All
complaints will be reviewed and investigated and will result in a response that
is deemed necessary and appropriate to the circumstances. The project team is
obligated to maintain confidentiality with regard to the reporter of an incident.
Further details of specific enforcement policies may be posted separately.
Project maintainers who do not follow or enforce the Code of Conduct in good
faith may face temporary or permanent repercussions as determined by other
members of the project's leadership.
## Attribution
This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4,
available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html
[homepage]: https://www.contributor-covenant.org
For answers to common questions about this code of conduct, see
* Fix consistency checking error swallowing in some cases when options.force_consistency_checks = true.
### Public API Change
* Flush(..., column_family) may return Status::ColumnFamilyDropped() instead of Status::InvalidArgument() if column_family is dropped while processing the flush request.
* BlobDB now explicitly disallows using the default column family's storage directories as blob directory.
* DeleteRange now returns `Status::InvalidArgument` if the range's end key comes before its start key according to the user comparator. Previously the behavior was undefined.
## 6.10 (5/2/2020)
### Bug Fixes
* Fix wrong result being read from ingested file. May happen when a key in the file happen to be prefix of another key also in the file. The issue can further cause more data corruption. The issue exists with rocksdb >= 5.0.0 since DB::IngestExternalFile() was introduced.
* Finish implementation of BlockBasedTableOptions::IndexType::kBinarySearchWithFirstKey. It's now ready for use. Significantly reduces read amplification in some setups, especially for iterator seeks.
* Fix a bug by updating CURRENT file so that it points to the correct MANIFEST file after best-efforts recovery.
* Fixed a bug where ColumnFamilyHandle objects were not cleaned up in case an error happened during BlobDB's open after the base DB had been opened.
* Fix a potential undefined behavior caused by trying to dereference nullable pointer (timestamp argument) in DB::MultiGet.
* Fix a bug caused by not including user timestamp in MultiGet LookupKey construction. This can lead to wrong query result since the trailing bytes of a user key, if not shorter than timestamp, will be mistaken for user timestamp.
* Fix a bug caused by using wrong compare function when sorting the input keys of MultiGet with timestamps.
* Upgraded version of bzip library (1.0.6 -> 1.0.8) used with RocksJava to address potential vulnerabilities if an attacker can manipulate compressed data saved and loaded by RocksDB (not normal). See issue #6703.
### Public API Change
* Add a ConfigOptions argument to the APIs dealing with converting options to and from strings and files. The ConfigOptions is meant to replace some of the options (such as input_strings_escaped and ignore_unknown_options) and allow for more parameters to be passed in the future without changing the function signature.
* Add NewFileChecksumGenCrc32cFactory to the file checksum public API, such that the builtin Crc32c based file checksum generator factory can be used by applications.
* Add IsDirectory to Env and FS to indicate if a path is a directory.
### New Features
* Added support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism. This feature is experimental for now.
* Provide an allocator for memkind to be used with block cache. This is to work with memory technologies (Intel DCPMM is one such technology currently available) that require different libraries for allocation and management (such as PMDK and memkind). The high capacities available make it possible to provision large caches (up to several TBs in size) beyond what is achievable with DRAM.
* Option `max_background_flushes` can be set dynamically using DB::SetDBOptions().
* Added functionality in sst_dump tool to check the compressed file size for different compression levels and print the time spent on compressing files with each compression type. Added arguments `--compression_level_from` and `--compression_level_to` to report size of all compression levels and one compression_type must be specified with it so that it will report compressed sizes of one compression type with different levels.
* Added statistics for redundant insertions into block cache: rocksdb.block.cache.*add.redundant. (There is currently no coordination to ensure that only one thread loads a table block when many threads are trying to access that same table block.)
### Bug Fixes
* Fix a bug when making options.bottommost_compression, options.compression_opts and options.bottommost_compression_opts dynamically changeable: the modified values are not written to option files or returned back to users when being queried.
* Fix a bug where index key comparisons were unaccounted in `PerfContext::user_key_comparison_count` for lookups in files written with `format_version >= 3`.
* Fix many bloom.filter statistics not being updated in batch MultiGet.
### Performance Improvements
* Improve performance of batch MultiGet with partitioned filters, by sharing block cache lookups to applicable filter blocks.
* Reduced memory copies when fetching and uncompressing compressed blocks from sst files.
## 6.9.0 (03/29/2020)
### Behavior changes
* Since RocksDB 6.8, ttl-based FIFO compaction can drop a file whose oldest key becomes older than options.ttl while others have not. This fix reverts this and makes ttl-based FIFO compaction use the file's flush time as the criterion. This fix also requires that max_open_files = -1 and compaction_options_fifo.allow_compaction = false to function properly.
### Public API Change
* Fix spelling so that API now has correctly spelled transaction state name `COMMITTED`, while the old misspelled `COMMITED` is still available as an alias.
* Updated default format_version in BlockBasedTableOptions from 2 to 4. SST files generated with the new default can be read by RocksDB versions 5.16 and newer, and use more efficient encoding of keys in index blocks.
* A new parameter `CreateBackupOptions` is added to both `BackupEngine::CreateNewBackup` and `BackupEngine::CreateNewBackupWithMetadata`, you can decrease CPU priority of `BackupEngine`'s background threads by setting `decrease_background_thread_cpu_priority` and `background_thread_cpu_priority` in `CreateBackupOptions`.
* Updated the public API of SST file checksum. Introduce the FileChecksumGenFactory to create the FileChecksumGenerator for each SST file, such that the FileChecksumGenerator is not shared and it can be more general for checksum implementations. Changed the FileChecksumGenerator interface from Value, Extend, and GetChecksum to Update, Finalize, and GetChecksum. Finalize should be only called once after all data is processed to generate the final checksum. Temproal data should be maintained by the FileChecksumGenerator object itself and finally it can return the checksum string.
### Bug Fixes
* Fix a bug where range tombstone blocks in ingested files were cached incorrectly during ingestion. If range tombstones were read from those incorrectly cached blocks, the keys they covered would be exposed.
* Fix a data race that might cause crash when calling DB::GetCreationTimeOfOldestFile() by a small chance. The bug was introduced in 6.6 Release.
* Fix a bug where a boolean value optimize_filters_for_hits was for max threads when calling load table handles after a flush or compaction. The value is correct to 1. The bug should not cause user visible problems.
* Fix a bug which might crash the service when write buffer manager fails to insert the dummy handle to the block cache.
### Performance Improvements
* In CompactRange, for levels starting from 0, if the level does not have any file with any key falling in the specified range, the level is skipped. So instead of always compacting from level 0, the compaction starts from the first level with keys in the specified range until the last such level.
* Reduced memory copy when reading sst footer and blobdb in direct IO mode.
* When restarting a database with large numbers of sst files, large amount of CPU time is spent on getting logical block size of the sst files, which slows down the starting progress, this inefficiency is optimized away with an internal cache for the logical block sizes.
### New Features
* Basic support for user timestamp in iterator. Seek/SeekToFirst/Next and lower/upper bounds are supported. Reverse iteration is not supported. Merge is not considered.
* When file lock failure when the lock is held by the current process, return acquiring time and thread ID in the error message.
* Added a new option, best_efforts_recovery (default: false), to allow database to open in a db dir with missing table files. During best efforts recovery, missing table files are ignored, and database recovers to the most recent state without missing table file. Cross-column-family consistency is not guaranteed even if WAL is enabled.
* options.bottommost_compression, options.compression_opts and options.bottommost_compression_opts are now dynamically changeable.
## 6.8.0 (02/24/2020)
### Java API Changes
* Major breaking changes to Java comparators, toward standardizing on ByteBuffer for performant, locale-neutral operations on keys (#6252).
* Added overloads of common API methods using direct ByteBuffers for keys and values (#2283).
### Bug Fixes
* Fix incorrect results while block-based table uses kHashSearch, together with Prev()/SeekForPrev().
* Fix a bug that prevents opening a DB after two consecutive crash with TransactionDB, where the first crash recovers from a corrupted WAL with kPointInTimeRecovery but the second cannot.
* Fixed issue #6316 that can cause a corruption of the MANIFEST file in the middle when writing to it fails due to no disk space.
* Add DBOptions::skip_checking_sst_file_sizes_on_db_open. It disables potentially expensive checking of all sst file sizes in DB::Open().
* BlobDB now ignores trivially moved files when updating the mapping between blob files and SSTs. This should mitigate issue #6338 where out of order flush/compaction notifications could trigger an assertion with the earlier code.
* Batched MultiGet() ignores IO errors while reading data blocks, causing it to potentially continue looking for a key and returning stale results.
*`WriteBatchWithIndex::DeleteRange` returns `Status::NotSupported`. Previously it returned success even though reads on the batch did not account for range tombstones. The corresponding language bindings now cannot be used. In C, that includes `rocksdb_writebatch_wi_delete_range`, `rocksdb_writebatch_wi_delete_range_cf`, `rocksdb_writebatch_wi_delete_rangev`, and `rocksdb_writebatch_wi_delete_rangev_cf`. In Java, that includes `WriteBatchWithIndex::deleteRange`.
* Assign new MANIFEST file number when caller tries to create a new MANIFEST by calling LogAndApply(..., new_descriptor_log=true). This bug can cause MANIFEST being overwritten during recovery if options.write_dbid_to_manifest = true and there are WAL file(s).
### Performance Improvements
* Perfom readahead when reading from option files. Inside DB, options.log_readahead_size will be used as the readahead size. In other cases, a default 512KB is used.
### Public API Change
* The BlobDB garbage collector now emits the statistics `BLOB_DB_GC_NUM_FILES` (number of blob files obsoleted during GC), `BLOB_DB_GC_NUM_NEW_FILES` (number of new blob files generated during GC), `BLOB_DB_GC_FAILURES` (number of failed GC passes), `BLOB_DB_GC_NUM_KEYS_RELOCATED` (number of blobs relocated during GC), and `BLOB_DB_GC_BYTES_RELOCATED` (total size of blobs relocated during GC). On the other hand, the following statistics, which are not relevant for the new GC implementation, are now deprecated: `BLOB_DB_GC_NUM_KEYS_OVERWRITTEN`, `BLOB_DB_GC_NUM_KEYS_EXPIRED`, `BLOB_DB_GC_BYTES_OVERWRITTEN`, `BLOB_DB_GC_BYTES_EXPIRED`, and `BLOB_DB_GC_MICROS`.
* Disable recycle_log_file_num when an inconsistent recovery modes are requested: kPointInTimeRecovery and kAbsoluteConsistency
### New Features
* Added the checksum for each SST file generated by Flush or Compaction. Added sst_file_checksum_func to Options such that user can plugin their own SST file checksum function via override the FileChecksumFunc class. If user does not set the sst_file_checksum_func, SST file checksum calculation will not be enabled. The checksum information inlcuding uint32_t checksum value and a checksum function name (string). The checksum information is stored in FileMetadata in version store and also logged to MANIFEST. A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST (stored in an unordered_map).
*`db_bench` now supports `value_size_distribution_type`, `value_size_min`, `value_size_max` options for generating random variable sized value. Added `blob_db_compression_type` option for BlobDB to enable blob compression.
* Replace RocksDB namespace "rocksdb" with flag "ROCKSDB_NAMESPACE" which if is not defined, defined as "rocksdb" in header file rocksdb_namespace.h.
## 6.7.0 (01/21/2020)
### Public API Change
* Added a rocksdb::FileSystem class in include/rocksdb/file_system.h to encapsulate file creation/read/write operations, and an option DBOptions::file_system to allow a user to pass in an instance of rocksdb::FileSystem. If its a non-null value, this will take precendence over DBOptions::env for file operations. A new API rocksdb::FileSystem::Default() returns a platform default object. The DBOptions::env option and Env::Default() API will continue to be used for threading and other OS related functions, and where DBOptions::file_system is not specified, for file operations. For storage developers who are accustomed to rocksdb::Env, the interface in rocksdb::FileSystem is new and will probably undergo some changes as more storage systems are ported to it from rocksdb::Env. As of now, no env other than Posix has been ported to the new interface.
* A new rocksdb::NewSstFileManager() API that allows the caller to pass in separate Env and FileSystem objects.
* Changed Java API for RocksDB.keyMayExist functions to use Holder<byte[]> instead of StringBuilder, so that retrieved values need not decode to Strings.
* A new `OptimisticTransactionDBOptions` Option that allows users to configure occ validation policy. The default policy changes from kValidateSerial to kValidateParallel to reduce mutex contention.
### Bug Fixes
* Fix a bug that can cause unnecessary bg thread to be scheduled(#6104).
* Fix crash caused by concurrent CF iterations and drops(#6147).
* Fix a race condition for cfd->log_number_ between manifest switch and memtable switch (PR 6249) when number of column families is greater than 1.
* Fix a bug on fractional cascading index when multiple files at the same level contain the same smallest user key, and those user keys are for merge operands. In this case, Get() the exact key may miss some merge operands.
* Delcare kHashSearch index type feature-incompatible with index_block_restart_interval larger than 1.
* Fixed an issue where the thread pools were not resized upon setting `max_background_jobs` dynamically through the `SetDBOptions` interface.
* Fix a bug that can cause write threads to hang when a slowdown/stall happens and there is a mix of writers with WriteOptions::no_slowdown set/unset.
* Fixed an issue where an incorrect "number of input records" value was used to compute the "records dropped" statistics for compactions.
* Fix a regression bug that causes segfault when hash is used, max_open_files != -1 and total order seek is used and switched back.
### New Features
* It is now possible to enable periodic compactions for the base DB when using BlobDB.
* BlobDB now garbage collects non-TTL blobs when `enable_garbage_collection` is set to `true` in `BlobDBOptions`. Garbage collection is performed during compaction: any valid blobs located in the oldest N files (where N is the number of non-TTL blob files multiplied by the value of `BlobDBOptions::garbage_collection_cutoff`) encountered during compaction get relocated to new blob files, and old blob files are dropped once they are no longer needed. Note: we recommend enabling periodic compactions for the base DB when using this feature to deal with the case when some old blob files are kept alive by SSTs that otherwise do not get picked for compaction.
*`db_bench` now supports the `garbage_collection_cutoff` option for BlobDB.
* Introduce ReadOptions.auto_prefix_mode. When set to true, iterator will return the same result as total order seek, but may choose to use prefix seek internally based on seek key and iterator upper bound.
* MultiGet() can use IO Uring to parallelize read from the same SST file. This featuer is by default disabled. It can be enabled with environment variable ROCKSDB_USE_IO_URING.
## 6.6.2 (01/13/2020)
### Bug Fixes
* Fixed a bug where non-L0 compaction input files were not considered to compute the `creation_time` of new compaction outputs.
## 6.6.1 (01/02/2020)
### Bug Fixes
* Fix a bug in WriteBatchWithIndex::MultiGetFromBatchAndDB, which is called by Transaction::MultiGet, that causes due to stale pointer access when the number of keys is > 32
* Fixed two performance issues related to memtable history trimming. First, a new SuperVersion is now created only if some memtables were actually trimmed. Second, trimming is only scheduled if there is at least one flushed memtable that is kept in memory for the purposes of transaction conflict checking.
* BlobDB no longer updates the SST to blob file mapping upon failed compactions.
* Fix a bug in which a snapshot read through an iterator could be affected by a DeleteRange after the snapshot (#6062).
* Fixed a bug where BlobDB was comparing the `ColumnFamilyHandle` pointers themselves instead of only the column family IDs when checking whether an API call uses the default column family or not.
* Delete superversions in BackgroundCallPurge.
* Fix use-after-free and double-deleting files in BackgroundCallPurge().
## 6.6.0 (11/25/2019)
### Bug Fixes
* Fix data corruption caused by output of intra-L0 compaction on ingested file not being placed in correct order in L0.
* Fix a data race between Version::GetColumnFamilyMetaData() and Compaction::MarkFilesBeingCompacted() for access to being_compacted (#6056). The current fix acquires the db mutex during Version::GetColumnFamilyMetaData(), which may cause regression.
* Fix a bug in DBIter that is_blob_ state isn't updated when iterating backward using seek.
* Fix a bug when format_version=3, partitioned filters, and prefix search are used in conjunction. The bug could result into Seek::(prefix) returning NotFound for an existing prefix.
* Revert the feature "Merging iterator to avoid child iterator reseek for some cases (#5286)" since it might cause strong results when reseek happens with a different iterator upper bound.
* Fix a bug causing a crash during ingest external file when background compaction cause severe error (file not found).
* Fix a bug when partitioned filters and prefix search are used in conjunction, ::SeekForPrev could return invalid for an existing prefix. ::SeekForPrev might be called by the user, or internally on ::Prev, or within ::Seek if the return value involves Delete or a Merge operand.
* Fix OnFlushCompleted fired before flush result persisted in MANIFEST when there's concurrent flush job. The bug exists since OnFlushCompleted was introduced in rocksdb 3.8.
* Fixed an sst_dump crash on some plain table SST files.
* Fixed a memory leak in some error cases of opening plain table SST files.
* Fix a bug when a crash happens while calling WriteLevel0TableForRecovery for multiple column families, leading to a column family's log number greater than the first corrutped log number when the DB is being opened in PointInTime recovery mode during next recovery attempt (#5856).
### New Features
* Universal compaction to support options.periodic_compaction_seconds. A full compaction will be triggered if any file is over the threshold.
*`GetLiveFilesMetaData` and `GetColumnFamilyMetaData` now expose the file number of SST files as well as the oldest blob file referenced by each SST.
* A batched MultiGet API (DB::MultiGet()) that supports retrieving keys from multiple column families.
* Full and partitioned filters in the block-based table use an improved Bloom filter implementation, enabled with format_version 5 (or above) because previous releases cannot read this filter. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single (full) filter. For example, the new Bloom filter has the same false positive rate at 9.55 bits per key as the old one at 10 bits per key, and a lower false positive rate at 16 bits per key than the old one at 100 bits per key.
* Added AVX2 instructions to USE_SSE builds to accelerate the new Bloom filter and XXH3-based hash function on compatible x86_64 platforms (Haswell and later, ~2014).
* Support options.ttl or options.periodic_compaction_seconds with options.max_open_files = -1. File's oldest ancester time and file creation time will be written to manifest. If it is availalbe, this information will be used instead of creation_time and file_creation_time in table properties.
* Setting options.ttl for universal compaction now has the same meaning as setting periodic_compaction_seconds.
* SstFileMetaData also returns file creation time and oldest ancester time.
* The `sst_dump` command line tool `recompress` command now displays how many blocks were compressed and how many were not, in particular how many were not compressed because the compression ratio was not met (12.5% threshold for GoodCompressionRatio), as seen in the `number.block.not_compressed` counter stat since version 6.0.0.
* The block cache usage is now takes into account the overhead of metadata per each entry. This results into more accurate management of memory. A side-effect of this feature is that less items are fit into the block cache of the same size, which would result to higher cache miss rates. This can be remedied by increasing the block cache size or passing kDontChargeCacheMetadata to its constuctor to restore the old behavior.
* When using BlobDB, a mapping is maintained and persisted in the MANIFEST between each SST file and the oldest non-TTL blob file it references.
*`db_bench` now supports and by default issues non-TTL Puts to BlobDB. TTL Puts can be enabled by specifying a non-zero value for the `blob_db_max_ttl_range` command line parameter explicitly.
*`sst_dump` now supports printing BlobDB blob indexes in a human-readable format. This can be enabled by specifying the `decode_blob_index` flag on the command line.
* A number of new information elements are now exposed through the EventListener interface. For flushes, the file numbers of the new SST file and the oldest blob file referenced by the SST are propagated. For compactions, the level, file number, and the oldest blob file referenced are passed to the client for each compaction input and output file.
### Public API Change
* RocksDB release 4.1 or older will not be able to open DB generated by the new release. 4.2 was released on Feb 23, 2016.
* TTL Compactions in Level compaction style now initiate successive cascading compactions on a key range so that it reaches the bottom level quickly on TTL expiry. `creation_time` table property for compaction output files is now set to the minimum of the creation times of all compaction inputs.
* With FIFO compaction style, options.periodic_compaction_seconds will have the same meaning as options.ttl. Whichever stricter will be used. With the default options.periodic_compaction_seconds value with options.ttl's default of 0, RocksDB will give a default of 30 days.
* Added an API GetCreationTimeOfOldestFile(uint64_t* creation_time) to get the file_creation_time of the oldest SST file in the DB.
* FilterPolicy now exposes additional API to make it possible to choose filter configurations based on context, such as table level and compaction style. See `LevelAndStyleCustomFilterPolicy` in db_bloom_filter_test.cc. While most existing custom implementations of FilterPolicy should continue to work as before, those wrapping the return of NewBloomFilterPolicy will require overriding new function `GetBuilderWithContext()`, because calling `GetFilterBitsBuilder()` on the FilterPolicy returned by NewBloomFilterPolicy is no longer supported.
* An unlikely usage of FilterPolicy is no longer supported. Calling GetFilterBitsBuilder() on the FilterPolicy returned by NewBloomFilterPolicy will now cause an assertion violation in debug builds, because RocksDB has internally migrated to a more elaborate interface that is expected to evolve further. Custom implementations of FilterPolicy should work as before, except those wrapping the return of NewBloomFilterPolicy, which will require a new override of a protected function in FilterPolicy.
* NewBloomFilterPolicy now takes bits_per_key as a double instead of an int. This permits finer control over the memory vs. accuracy trade-off in the new Bloom filter implementation and should not change source code compatibility.
* The option BackupableDBOptions::max_valid_backups_to_open is now only used when opening BackupEngineReadOnly. When opening a read/write BackupEngine, anything but the default value logs a warning and is treated as the default. This change ensures that backup deletion has proper accounting of shared files to ensure they are deleted when no longer referenced by a backup.
* Deprecate `snap_refresh_nanos` option.
* Added DisableManualCompaction/EnableManualCompaction to stop and resume manual compaction.
* Add TryCatchUpWithPrimary() to StackableDB in non-LITE mode.
* Add a new Env::LoadEnv() overloaded function to return a shared_ptr to Env.
* Flush sets file name to "(nil)" for OnTableFileCreationCompleted() if the flush does not produce any L0. This can happen if the file is empty thus delete by RocksDB.
### Default Option Changes
* Changed the default value of periodic_compaction_seconds to `UINT64_MAX - 1` which allows RocksDB to auto-tune periodic compaction scheduling. When using the default value, periodic compactions are now auto-enabled if a compaction filter is used. A value of `0` will turn off the feature completely.
* Changed the default value of ttl to `UINT64_MAX - 1` which allows RocksDB to auto-tune ttl value. When using the default value, TTL will be auto-enabled to 30 days, when the feature is supported. To revert the old behavior, you can explicitly set it to 0.
### Performance Improvements
* For 64-bit hashing, RocksDB is standardizing on a slightly modified preview version of XXH3. This function is now used for many non-persisted hashes, along with fastrange64() in place of the modulus operator, and some benchmarks show a slight improvement.
* Level iterator to invlidate the iterator more often in prefix seek and the level is filtered out by prefix bloom.
## 6.5.2 (11/15/2019)
### Bug Fixes
* Fix a assertion failure in MultiGet() when BlockBasedTableOptions::no_block_cache is true and there is no compressed block cache
* Fix a buffer overrun problem in BlockBasedTable::MultiGet() when compression is enabled and no compressed block cache is configured.
* If a call to BackupEngine::PurgeOldBackups or BackupEngine::DeleteBackup suffered a crash, power failure, or I/O error, files could be left over from old backups that could only be purged with a call to GarbageCollect. Any call to PurgeOldBackups, DeleteBackup, or GarbageCollect should now suffice to purge such files.
## 6.5.1 (10/16/2019)
### Bug Fixes
* Revert the feature "Merging iterator to avoid child iterator reseek for some cases (#5286)" since it might cause strange results when reseek happens with a different iterator upper bound.
* Fix a bug in BlockBasedTableIterator that might return incorrect results when reseek happens with a different iterator upper bound.
* Fix a bug when partitioned filters and prefix search are used in conjunction, ::SeekForPrev could return invalid for an existing prefix. ::SeekForPrev might be called by the user, or internally on ::Prev, or within ::Seek if the return value involves Delete or a Merge operand.
## 6.5.0 (9/13/2019)
### Bug Fixes
* Fixed a number of data races in BlobDB.
* Fix a bug where the compaction snapshot refresh feature is not disabled as advertised when `snap_refresh_nanos` is set to 0..
* Fix bloom filter lookups by the MultiGet batching API when BlockBasedTableOptions::whole_key_filtering is false, by checking that a key is in the perfix_extractor domain and extracting the prefix before looking up.
* Fix a bug in file ingestion caused by incorrect file number allocation when the number of column families involved in the ingestion exceeds 2.
### New Features
* Introduced DBOptions::max_write_batch_group_size_bytes to configure maximum limit on number of bytes that are written in a single batch of WAL or memtable write. It is followed when the leader write size is larger than 1/8 of this limit.
* VerifyChecksum() by default will issue readahead. Allow ReadOptions to be passed in to those functions to override the readhead size. For checksum verifying before external SST file ingestion, a new option IngestExternalFileOptions.verify_checksums_readahead_size, is added for this readahead setting.
* When user uses options.force_consistency_check in RocksDb, instead of crashing the process, we now pass the error back to the users without killing the process.
* Add an option `memtable_insert_hint_per_batch` to WriteOptions. If it is true, each WriteBatch will maintain its own insert hints for each memtable in concurrent write. See include/rocksdb/options.h for more details.
### Public API Change
* Added max_write_buffer_size_to_maintain option to better control memory usage of immutable memtables.
* Added a lightweight API GetCurrentWalFile() to get last live WAL filename and size. Meant to be used as a helper for backup/restore tooling in a larger ecosystem such as MySQL with a MyRocks storage engine.
* The MemTable Bloom filter, when enabled, now always uses cache locality. Options::bloom_locality now only affects the PlainTable SST format.
### Performance Improvements
* Improve the speed of the MemTable Bloom filter, reducing the write overhead of enabling it by 1/3 to 1/2, with similar benefit to read performance.
## 6.4.0 (7/30/2019)
### Default Option Change
* LRUCacheOptions.high_pri_pool_ratio is set to 0.5 (previously 0.0) by default, which means that by default midpoint insertion is enabled. The same change is made for the default value of high_pri_pool_ratio argument in NewLRUCache(). When block cache is not explicitly created, the small block cache created by BlockBasedTable will still has this option to be 0.0.
* Change BlockBasedTableOptions.cache_index_and_filter_blocks_with_high_priority's default value from false to true.
### Public API Change
* Filter and compression dictionary blocks are now handled similarly to data blocks with regards to the block cache: instead of storing objects in the cache, only the blocks themselves are cached. In addition, filter and compression dictionary blocks (as well as filter partitions) no longer get evicted from the cache when a table is closed.
* Due to the above refactoring, block cache eviction statistics for filter and compression dictionary blocks are temporarily broken. We plan to reintroduce them in a later phase.
* The semantics of the per-block-type block read counts in the performance context now match those of the generic block_read_count.
* Errors related to the retrieval of the compression dictionary are now propagated to the user.
* db_bench adds a "benchmark" stats_history, which prints out the whole stats history.
* Overload GetAllKeyVersions() to support non-default column family.
* Added new APIs ExportColumnFamily() and CreateColumnFamilyWithImport() to support export and import of a Column Family. https://github.com/facebook/rocksdb/issues/3469
* ldb sometimes uses a string-append merge operator if no merge operator is passed in. This is to allow users to print keys from a DB with a merge operator.
* Replaces old Registra with ObjectRegistry to allow user to create custom object from string, also add LoadEnv() to Env.
* Added new overload of GetApproximateSizes which gets SizeApproximationOptions object and returns a Status. The older overloads are redirecting their calls to this new method and no longer assert if the include_flags doesn't have either of INCLUDE_MEMTABLES or INCLUDE_FILES bits set. It's recommended to use the new method only, as it is more type safe and returns a meaningful status in case of errors.
* LDBCommandRunner::RunCommand() to return the status code as an integer, rather than call exit() using the code.
### New Features
* Add argument `--secondary_path` to ldb to open the database as the secondary instance. This would keep the original DB intact.
* Compression dictionary blocks are now prefetched and pinned in the cache (based on the customer's settings) the same way as index and filter blocks.
* Added DBOptions::log_readahead_size which specifies the number of bytes to prefetch when reading the log. This is mostly useful for reading a remotely located log, as it can save the number of round-trips. If 0 (default), then the prefetching is disabled.
* Added new option in SizeApproximationOptions used with DB::GetApproximateSizes. When approximating the files total size that is used to store a keys range, allow approximation with an error margin of up to total_files_size * files_size_error_margin. This allows to take some shortcuts in files size approximation, resulting in better performance, while guaranteeing the resulting error is within a reasonable margin.
* Support loading custom objects in unit tests. In the affected unit tests, RocksDB will create custom Env objects based on environment variable TEST_ENV_URI. Users need to make sure custom object types are properly registered. For example, a static library should expose a `RegisterCustomObjects` function. By linking the unit test binary with the static library, the unit test can execute this function.
### Performance Improvements
* Reduce iterator key comparison for upper/lower bound check.
* Improve performance of row_cache: make reads with newer snapshots than data in an SST file share the same cache key, except in some transaction cases.
* The compression dictionary is no longer copied to a new object upon retrieval.
### Bug Fixes
* Fix ingested file and directory not being fsync.
* Return TryAgain status in place of Corruption when new tail is not visible to TransactionLogIterator.
* Fixed a regression where the fill_cache read option also affected index blocks.
* Fixed an issue where using cache_index_and_filter_blocks==false affected partitions of partitioned indexes/filters as well.
## 6.3.2 (8/15/2019)
### Public API Change
* The semantics of the per-block-type block read counts in the performance context now match those of the generic block_read_count.
### Bug Fixes
* Fixed a regression where the fill_cache read option also affected index blocks.
* Fixed an issue where using cache_index_and_filter_blocks==false affected partitions of partitioned indexes as well.
## 6.3.1 (7/24/2019)
### Bug Fixes
* Fix auto rolling bug introduced in 6.3.0, which causes segfault if log file creation fails.
## 6.3.0 (6/18/2019)
### Public API Change
* Now DB::Close() will return Aborted() error when there is unreleased snapshot. Users can retry after all snapshots are released.
* Index blocks are now handled similarly to data blocks with regards to the block cache: instead of storing objects in the cache, only the blocks themselves are cached. In addition, index blocks no longer get evicted from the cache when a table is closed, can now use the compressed block cache (if any), and can be shared among multiple table readers.
* Partitions of partitioned indexes no longer affect the read amplification statistics.
* Due to a refactoring, block cache eviction statistics for indexes are temporarily broken. We plan to reintroduce them in a later phase.
* Due to the above refactoring, block cache eviction statistics for indexes are temporarily broken. We plan to reintroduce them in a later phase.
* options.keep_log_file_num will be enforced strictly all the time. File names of all log files will be tracked, which may take significantly amount of memory if options.keep_log_file_num is large and either of options.max_log_file_size or options.log_file_time_to_roll is set.
* Add initial support for Get/Put with user timestamps. Users can specify timestamps via ReadOptions and WriteOptions when calling DB::Get and DB::Put.
* Accessing a partition of a partitioned filter or index through a pinned reference is no longer considered a cache hit.
* Add C bindings for secondary instance, i.e. DBImplSecondary.
* Rate limited deletion of WALs is only enabled if DBOptions::wal_dir is not set, or explicitly set to db_name passed to DB::Open and DBOptions::db_paths is empty, or same as db_paths[0].path
### New Features
* Add an option `snap_refresh_nanos` (default to 0.1s) to periodically refresh the snapshot list in compaction jobs. Assign to 0 to disable the feature.
* Add an option `snap_refresh_nanos` (default to 0) to periodically refresh the snapshot list in compaction jobs. Assign to 0 to disable the feature.
* Add an option `unordered_write` which trades snapshot guarantees with higher write throughput. When used with WRITE_PREPARED transactions with two_write_queues=true, it offers higher throughput with however no compromise on guarantees.
* Allow DBImplSecondary to remove memtables with obsolete data after replaying MANIFEST and WAL.
* Add an option `failed_move_fall_back_to_copy` (default is true) for external SST ingestion. When `move_files` is true and hard link fails, ingestion falls back to copy if `failed_move_fall_back_to_copy` is true. Otherwise, ingestion reports an error.
* Add command `list_file_range_deletes` in ldb, which prints out tombstones in SST files.
### Performance Improvements
* Reduce binary search when iterator reseek into the same data block.
* DBIter::Next() can skip user key checking if previous entry's seqnum is 0.
* Merging iterator to avoid child iterator reseek for some cases
* Log Writer will flush after finishing the whole record, rather than a fragment.
* Lower MultiGet batching API latency by reading data blocks from disk in parallel
### General Improvements
* Added new status code kColumnFamilyDropped to distinguish between Column Family Dropped and DB Shutdown in progress.
@@ -29,6 +302,7 @@
* Fix flush's/compaction's merge processing logic which allowed `Put`s covered by range tombstones to reappear. Note `Put`s may exist even if the user only ever called `Merge()` due to an internal conversion during compaction to the bottommost level.
* Fix/improve memtable earliest sequence assignment and WAL replay so that WAL entries of unflushed column families will not be skipped after replaying the MANIFEST and increasing db sequence due to another flushed/compacted column family.
* Fix a bug caused by secondary not skipping the beginning of new MANIFEST.
* On DB open, delete WAL trash files left behind in wal_dir
## 6.2.0 (4/30/2019)
### New Features
@@ -38,6 +312,7 @@
* Block-based table index now contains exact highest key in the file, rather than an upper bound. This may improve Get() and iterator Seek() performance in some situations, especially when direct IO is enabled and block cache is disabled. A setting BlockBasedTableOptions::index_shortening is introduced to control this behavior. Set it to kShortenSeparatorsAndSuccessor to get the old behavior.
* When reading from option file/string/map, customized envs can be filled according to object registry.
* Improve range scan performance when using explicit user readahead by not creating new table readers for every iterator.
* Add index type BlockBasedTableOptions::IndexType::kBinarySearchWithFirstKey. It significantly reduces read amplification in some setups, especially for iterator seeks. It's not fully implemented yet: IO errors are not handled right.
### Public API Change
* Change the behavior of OptimizeForPointLookup(): move away from hash-based block-based-table index, and use whole key memtable filtering.
@@ -66,7 +341,7 @@
* Introduce two more stats levels, kExceptHistogramOrTimers and kExceptTimers.
* Added a feature to perform data-block sampling for compressibility, and report stats to user.
* Add support for trace filtering.
* Add DBOptions.avoid_unnecessary_blocking_io. If true, we avoid file deletion when destorying ColumnFamilyHandle and Iterator. Instead, a job is scheduled to delete the files in background.
* Add DBOptions.avoid_unnecessary_blocking_io. If true, we avoid file deletion when destroying ColumnFamilyHandle and Iterator. Instead, a job is scheduled to delete the files in background.
### Public API Change
* Remove bundled fbson library.
@@ -445,7 +720,7 @@ if set to something > 0 user will see 2 changes in iterators behavior 1) only ke
## 5.2.0 (02/08/2017)
### Public API Change
* NewLRUCache() will determine number of shard bits automatically based on capacity, if the user doesn't pass one. This also impacts the default block cache when the user doesn't explict provide one.
* NewLRUCache() will determine number of shard bits automatically based on capacity, if the user doesn't pass one. This also impacts the default block cache when the user doesn't explicit provide one.
* Change the default of delayed slowdown value to 16MB/s and further increase the L0 stop condition to 36 files.
* Options::use_direct_writes and Options::use_direct_reads are now ready to use.
* (Experimental) Two-level indexing that partition the index and creates a 2nd level index on the partitions. The feature can be enabled by setting kTwoLevelIndexSearch as IndexType and configuring index_per_partition.
@@ -516,7 +791,7 @@ if set to something > 0 user will see 2 changes in iterators behavior 1) only ke
### New Features
* A tool to migrate DB after options change. See include/rocksdb/utilities/option_change_migration.h.
* Add ReadOptions.background_purge_on_iterator_cleanup. If true, we avoid file deletion when destorying iterators.
* Add ReadOptions.background_purge_on_iterator_cleanup. If true, we avoid file deletion when destroying iterators.
cd java/src/main/java;jar -cf ../../../target/$(ROCKSDB_SOURCES_JAR) org
rocksdbjavastaticrelease:rocksdbjavastatic
cd java/crossbuild && vagrant destroy -f && vagrant up linux32 && vagrant halt linux32 && vagrant up linux64 && vagrant halt linux64
cd java/crossbuild &&(vagrant destroy -f||true)&& vagrant up linux32 && vagrant halt linux32 && vagrant up linux64 && vagrant halt linux64&& vagrant up linux64-musl && vagrant halt linux64-musl
cd java;jar -cf target/$(ROCKSDB_JAR_ALL) HISTORY*.md
cd java/target;jar -uf $(ROCKSDB_JAR_ALL) librocksdbjni-*.so librocksdbjni-*.jnilib
cd java/target/classes;jar -uf ../$(ROCKSDB_JAR_ALL) org/rocksdb/*.class org/rocksdb/util/*.class
@@ -96,3 +96,16 @@ LzLabs is using RocksDB as a storage engine in their multi-database distributed
## IOTA Foundation
[IOTA Foundation](https://www.iota.org/) is using RocksDB in the [IOTA Reference Implementation (IRI)](https://github.com/iotaledger/iri) to store the local state of the Tangle. The Tangle is the first open-source distributed ledger powering the future of the Internet of Things.
## Avrio Project
[Avrio Project](http://avrio-project.github.io/avrio.network/) is using RocksDB in [Avrio ](https://github.com/avrio-project/avrio) to store blocks, account balances and data and other blockchain-releated data. Avrio is a multiblockchain decentralized cryptocurrency empowering monetary transactions.
## Crux
[Crux](https://github.com/juxt/crux) is a document database that uses RocksDB for local [EAV](https://en.wikipedia.org/wiki/Entity%E2%80%93attribute%E2%80%93value_model) index storage to enable point-in-time bitemporal Datalog queries. The "unbundled" architecture uses Kafka to provide horizontal scalability.
## Nebula Graph
[Nebula Graph](https://github.com/vesoft-inc/nebula) is a distributed, scalable, lightning-fast, open source graph database capable of hosting super large scale graphs with dozens of billions of vertices (nodes) and trillions of edges, with milliseconds of latency.
## YugabyteDB
[YugabyteDB](https://www.yugabyte.com/) is an open source, high performance, distributed SQL database that uses RocksDB as its storage layer. For more information, please see https://github.com/yugabyte/yugabyte-db/.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Andrew Kryczka
