Summary:
- propagate lower-level read and merge failures through `GetContext` via `read_status`, so `Get` and `GetEntity` preserve the original error instead of synthesizing `Corruption` when blob-backed reads or merge resolution fail
- teach `GetMergeOperands` to resolve blob-backed default columns from wide-column entities, covering both the direct base-value path and the merge-plus-base path
- add regression coverage for blob-read IO errors during `Get`/`GetEntity` merge resolution and for `GetMergeOperands` on blob-backed wide-column entities
- fix the `DBFlushTest.MemPurgeCorrectLogNumberAndSSTFileCreation` test race by waiting for flush callbacks and cleaning up sync points
## Testing
- `make db_blob_basic_test -j14`
- `/usr/bin/perl -e 'alarm shift; exec ARGV' 60 ./db_blob_basic_test --gtest_filter='DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/*:DBBlobBasicTest/DBBlobBasicIOErrorTest.GetEntityMergeWithBlobBaseIOError/*'`
## Task
T265824017, T265415808
Pull Request resolved: https://github.com/facebook/rocksdb/pull/14640
Reviewed By: anand1976
Differential Revision: D101690700
Pulled By: xingbowang
fbshipit-source-id: 2b6fc357b37a01efa72a2d54dcff55be8992f42a
Summary:
The non-ASCII character check in check-sources.sh used git grep -P (Perl regex), which requires git compiled with PCRE support. On systems without it, the command fails with exit code 128, which is != 1 (no match), so the check always reported a violation -- effectively dead.
Even in CI where git has PCRE2 support, the check was silently broken: git grep -P uses PCRE2 in UTF mode by default, which interprets [\x80-\xFF] as a Unicode codepoint range (U+0080 to U+00FF). Characters like em-dash (U+2014), arrows (U+2192), and math symbols (U+2248, etc.) fall outside that range and were not detected. Only Latin-1 Supplement characters (U+0080-U+00FF) would have been caught.
Replace with LC_ALL=C git grep using bash $'[\x80-\xff]' literal byte range, which works with basic regex in the C locale, and replace all non-ASCII characters in non-excluded source files:
- em-dash to --
- arrow to ->
- math symbols to ASCII equivalents (~=, <=, >=)
- box-drawing characters to ASCII art
Also exclude .github/ from the check, as scripts there can use non-ascii without disrupting RocksDB builds on non-UTF-8 systems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/14729
Test Plan: manual / CI (make check-sources passes clean)
Reviewed By: hx235
Differential Revision: D104692574
Pulled By: pdillinger
fbshipit-source-id: 1d884c21056dcd83558b825a04b867f1c08e3f45
Summary:
Restore the iterator contract for blob-backed wide-column entities by eagerly materializing all blob-backed columns before a `DBIter` entry is exposed as valid. Also capture similar error inside compaction filter V4, so that the error is captured a surfaced up like older compaction filter V3.
## Problem
Lazy wide-column blob resolution let `DBIter` report `Valid() == true` before all columns were actually prepared. Callers could read `value()` successfully, then hit a blob-read failure in `columns()`, which flipped the iterator to invalid after the entry had already been observed as valid.
## Solution
- Restore back to old behavior.
- Resolve and materialize all blob-backed wide columns during iterator positioning.
- Keep `columns()` as a pure accessor once `Valid()` is true.
- Add coverage for eager blob resolution on iterator scans.
- Add coverage for blob resolution failures invalidating the iterator before the entry is exposed.
- Capture the same error in compaction filter and set db to bg error status if the error is not retriable.
## Next step
If we want lazy iterator resolution in the future, we will need an API that can surface lazy resolution failures explicitly instead of hiding I/O and status transitions inside value() or columns().
## Testing
- `make -j14 db_wide_blob_direct_write_test`
- `timeout 60s ./db_wide_blob_direct_write_test --gtest_filter='*DirectWriteIteratorValueScanEagerlyResolvesBlobColumns:*DirectWriteIteratorBlobResolutionErrorInvalidatesEntry'`
## Task
T265294130
# Bonus fix
## Non-compaction blob filtering fixes
### 1. Flush-time wide-entity lazy blob resolution now works correctly
Blob direct-write can leave wide-entity blob references in memtables before flush. Flush already runs through `CompactionIterator`, but outside a real compaction it did not have blob read support. As a result, `FilterV4` lazy resolution on flush could fail immediately with
`NotSupported("Blob fetcher not available")` instead of either:
- resolving the blob successfully, or
- surfacing the real blob read error and failing the flush
This stack fixes that by plumbing blob read support into non-compaction table-file creation. `BuildTable()` now gives `CompactionIterator` enough context to construct a `BlobFetcher` for flush/recovery table building, including write-path fallback for direct-write blob files
that are not yet manifest-visible.
With that in place:
- flush-time `FilterV4` can lazily resolve blob-backed wide columns
- if resolution fails, the failure is latched and flush fails after `FilterV4()` returns
- `bg_error` is set instead of silently preserving the entry
### 2. Plain blob fallback outside compaction now uses the resolved user value
For plain blob-backed values, `FilterBlobByKey()` is allowed to return `kUndetermined`, which is supposed to fall back to the normal value-based filter path. That fallback worked in compaction, but the non-compaction `BuildTable()` path still treated plain blob indexes as
unsupported/corrupt because it could not read the blob.
This stack fixes that behavior for flush/recovery table-file creation:
- when `FilterBlobByKey()` returns `kUndetermined`, RocksDB now eagerly resolves the plain blob value
- `FilterV2`/`FilterV3`/`FilterV4` then see the actual user value as `ValueType::kValue`, not the `BlobIndex` encoding
- legacy filters therefore behave the same way outside compaction as they already do inside compaction
Wide-column entities still use the `FilterV4` lazy resolver path. The plain-blob fix is specifically about restoring the documented fallback behavior for blob-backed `kValue` records outside compaction.
## Why this matters
Without these last two commits, flush-time filtering still had two inconsistent behaviors:
- wide-entity lazy resolution could not actually read blob-backed columns in the direct-write case
- plain blob-backed values could not fall back to normal value-based filtering outside compaction
So even after fixing iterator validity and compaction error propagation, non-compaction table-file creation still had remaining contract holes. These commits make flush/recovery behave consistently with compaction.
## Coverage added
The tests added in these commits cover:
- flush-time plain-blob `FilterV3` fallback using the resolved user value
- flush-time plain-blob `FilterV4` fallback using the resolved user value
- flush-time direct-write wide-entity lazy resolver success
- flush-time direct-write wide-entity lazy resolver failure on missing blob file, including flush failure and `bg_error` latching
Pull Request resolved: https://github.com/facebook/rocksdb/pull/14632
Reviewed By: anand1976
Differential Revision: D101425233
Pulled By: xingbowang
fbshipit-source-id: 695b2df5189033d30309b35849815e31fd965664
Summary:
Wide-column blob separation: lazy resolution through read, compaction, and write paths
Extend blob direct write to support wide-column entities (PutEntity), and add
lazy blob resolution for wide-column values across all read and compaction paths.
**Write path -- PutEntity blob separation:**
- BlobWriteBatchTransformer::PutEntityCF now extracts large column values
(>= min_blob_size) to blob files and serializes V2 entities with BlobIndex
references, matching the existing Put behavior.
- Add MaybePreprocessWideColumns() static helper to share blob extraction
logic between the WriteBatch transformer and the new PutEntity fast path.
- Add PutEntityFastPath() in DBImpl that preprocesses columns (sort, blob
extract, serialize) before calling WriteImpl, skipping the redundant
WriteBatch transformation pass. Trace batch preserves the original columns.
**Read path -- blob resolution for Get/MultiGet/Iterator:**
- GetContext::SaveValue resolves V2 entity blob columns eagerly: for
value (Get), resolves the default column's blob reference; for columns
(GetEntity), resolves all blob columns and re-serializes as V1.
- DBIter::SetValueAndColumnsFromEntity detects V2 entities, deserializes
with DeserializeV2, and eagerly resolves all blob columns via a new
ReadPathBlobResolver. Resolved values are cached in the resolver and
wide_columns_ Slices point into the cache, avoiding copies.
- Add ReadPathBlobResolver (new file) -- on-demand blob fetcher for the
read path with per-column caching, used by both DBIter and GetContext.
- BlobFetcher gains allow_write_path_fallback to read from in-flight
direct-write blob files not yet visible through Version (pre-flush reads).
- Memtable lookups for Get(key) on V2 entities with a blob default column
now return the blob index with is_blob_index=true, triggering the
existing BDW resolution in MaybeResolveWritePathValue.
- MaybeResolveWritePathValue (renamed from MaybeResolveDirectWriteBlobIndex)
now also resolves V2 entity blob columns for GetEntity/MultiGetEntity,
re-serializing as V1 after resolution.
**Compaction path -- filter, GC, and extraction:**
- CompactionIterator::InvokeFilterIfNeeded handles V2 entities: FilterV3
gets eagerly-resolved column values for backward compatibility; FilterV4
gets a CompactionBlobResolver for lazy on-demand resolution.
- Add CompactionFilter::FilterV4 with WideColumnBlobResolver* parameter
and SupportsFilterV4() opt-in. Default delegates to FilterV3.
- CompactionBlobResolver (new class) implements WideColumnBlobResolver
for the compaction path with stats tracking.
- ExtractLargeColumnValuesIfNeeded extracts inline columns to blob files
during compaction (entities without existing blob columns only).
- GarbageCollectEntityBlobsIfNeeded relocates blob values from old blob
files to new ones during compaction GC, with helpers FetchBlobsNeedingGC,
RelocateBlobValues, and SerializeEntityAfterGC.
- PrepareOutput unified entity deserialization: single DeserializeV2 call
reused by both filter and GC/extraction paths via entity_deserialized_
flag, avoiding redundant parsing.
**Merge path -- V2 entity base value resolution:**
- MergeHelper::MergeUntil, GetContext::MergeWithWideColumnBaseValue, and
DBIter::MergeWithWideColumnBaseValue resolve V2 blob columns before
calling TimedFullMerge, using ResolveEntityForMerge.
**Blob garbage accounting:**
- BlobGarbageMeter tracks blob file in/out flow for V2 entity blob
columns via ForEachBlobFileNumber, used for accurate GC decisions.
- FileMetaData::UpdateBoundaries tracks oldest_blob_file_number for
V2 entities, ensuring blob files referenced by entities are not
prematurely deleted.
**Serialization improvements:**
- WideColumnSerialization::SerializeV2Impl allocates serialized_blob_indices
only for actual blob columns (not all columns) and uses autovector for
name/value sizes.
- Add ForEachBlobFileNumber for lightweight blob file number extraction
without full deserialization.
- Add ResolveEntityForMerge helper for merge-path resolution.
- Add section-size validation in DeserializeV2Impl.
- Add empty blob index and column type validation.
- blob_column_resolver_util.h -- shared helpers (FindBlobColumn, FindInCache,
CacheInlinedBlob) used by both ReadPathBlobResolver and CompactionBlobResolver.
**Testing:**
- db_blob_direct_write_test: end-to-end PutEntity with BDW before/after flush,
verifying Get, GetEntity, MultiGetEntity, and Iterator.
- db_blob_index_test: ~1550 lines covering V2 entity blob resolution through
Get, GetEntity, MultiGet, Iterator, compaction filter (V3 compat and V4 lazy),
merge with blob base, and compaction GC/extraction.
- compaction_iterator_test: ~950 lines testing entity blob GC, extraction,
filter interaction, and combined GC+filter scenarios.
- db_wide_basic_test: ~1200 lines for wide-column lazy blob resolution through
all read paths plus compaction round-trips.
- db_open_with_config_test: ~450 lines for BDW entity config validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/14386
Reviewed By: anand1976
Differential Revision: D99739701
Pulled By: xingbowang
fbshipit-source-id: 6badd89b577f3054802eaaa654738468efb9dbdb
Summary:
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR https://github.com/facebook/rocksdb/issues/12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: https://github.com/facebook/rocksdb/issues/11925#11943, and https://github.com/facebook/rocksdb/issues/11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12395
Test Plan:
# Summary
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR #12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: #11925#11943, and #11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
# Test Plan
There should be no behavior changes. Existing tests and CI for the correctness tests.
**Test for Perf Regression**
Build
```
$> make -j64 release
```
Setup
```
$> TEST_TMPDIR=/dev/shm/db_bench ./db_bench -benchmarks="filluniquerandom" -key_size=32 -value_size=512 -num=1000000 -compression_type=none
```
Run
```
TEST_TMPDIR=/dev/shm/db_bench ./db_bench -use_existing_db=1 -benchmarks="newiterator,seekrandom" -cache_size=10485760000
```
Before the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.552 micros/op 1810157 ops/sec 0.552 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.502 micros/op 222143 ops/sec 4.502 seconds 1000000 operations; (0 of 1000000 found)
```
After the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.520 micros/op 1924401 ops/sec 0.520 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.532 micros/op 220657 ops/sec 4.532 seconds 1000000 operations; (0 of 1000000 found)
```
Reviewed By: pdillinger
Differential Revision: D54332713
Pulled By: jaykorean
fbshipit-source-id: b28d897ad519e58b1ca82eb068a6319544a4fae5
Summary:
The following are risks associated with pointer-to-pointer reinterpret_cast:
* Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do.
* Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally.
I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement:
* Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have
`struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic.
* Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance.
With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain.
A couple of related interventions included here:
* Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle.
* Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse).
Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work.
I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308
Test Plan: existing tests, CI
Reviewed By: ltamasi
Differential Revision: D53204947
Pulled By: pdillinger
fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2
Summary:
As discussed in https://github.com/facebook/rocksdb/issues/11730 , this PR tracks the effective `full_history_ts_low` per SuperVersion and update existing sanity checks for `ReadOptions.timestamp >= full_history_ts_low` to use this per SuperVersion `full_history_ts_low` instead. This also means the check is moved to happen after acquiring SuperVersion.
There are two motivations for this: 1) Each time `full_history_ts_low` really come into effect to collapse history, a new SuperVersion is always installed, because it would involve either a Flush or Compaction, both of which change the LSM tree shape. We can take advantage of this to ensure that as long as this sanity check is passed, even if `full_history_ts_low` can be concurrently increased and collapse some history above the requested `ReadOptions.timestamp`, a read request won’t have visibility to that part of history through this SuperVersion that it already acquired. 2) the existing sanity check uses `ColumnFamilyData::GetFullHistoryTsLow` without locking the db mutex, which is the mutex all `IncreaseFullHistoryTsLow` operation is using when mutating this field. So there is a race condition. This also solve the race condition on the read path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11784
Test Plan:
`make all check`
// Checks success scenario really provide the read consistency attribute as mentioned above.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckPassReadIsConsistent*`
// Checks failure scenario cleans up SuperVersion properly.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_secondary_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_readonly_with_timestamp_test --gtest_filter=*FullHistoryTsLowSanitchCheckFail*`
Reviewed By: ltamasi
Differential Revision: D48894795
Pulled By: jowlyzhang
fbshipit-source-id: 1f801fe8e1bc8e63ca76c03cbdbd0974e5ff5bf6
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
In `FileMetaData`, we keep track of the lowest-numbered blob file
referenced by the SST file in question for the purposes of BlobDB's
garbage collection in the `oldest_blob_file_number` field, which is
updated in `UpdateBoundaries`. However, with the current code,
`BlobIndex` decoding errors (or invalid blob file numbers) are swallowed
in this method. The patch changes this by propagating these errors
and failing the corresponding flush/compaction. (Note that since blob
references are generated by the BlobDB code and also parsed by
`CompactionIterator`, in reality this can only happen in the case of
memory corruption.)
This change necessitated updating some unit tests that involved
fake/corrupt `BlobIndex` objects. Some of these just used a dummy string like
`"blob_index"` as a placeholder; these were replaced with real `BlobIndex`es.
Some were relying on the earlier behavior to simulate corruption; these
were replaced with `SyncPoint`-based test code that corrupts a valid
blob reference at read time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9851
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D35683671
Pulled By: ltamasi
fbshipit-source-id: f7387af9945c48e4d5c4cd864f1ba425c7ad51f6
Summary:
Allow compaction_job_test, db_io_failure_test, dbformat_test, deletefile_test, and fault_injection_test to use a custom Env object. Also move ```RegisterCustomObjects``` declaration to a header file to simplify things.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9087
Test Plan: Run manually using "buck test rocksdb/src:compaction_job_test_fbcode" etc.
Reviewed By: riversand963
Differential Revision: D32007222
Pulled By: anand1976
fbshipit-source-id: 99af58559e25bf61563dfa95dc46e31fa7375792
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
This PR add support for Merge operation in Integrated BlobDB with base values(i.e DB::Put). Merged values can be retrieved through DB::Get, DB::MultiGet, DB::GetMergeOperands and Iterator operation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8292
Test Plan: Add new unit tests
Reviewed By: ltamasi
Differential Revision: D28415896
Pulled By: akankshamahajan15
fbshipit-source-id: e9b3478bef51d2f214fb88c31ed3c8d2f4a531ff
Summary:
The patch adds iterator support to the integrated BlobDB implementation.
Whenever a blob reference is encountered during iteration, the corresponding
blob is retrieved by calling `Version::GetBlob`, assuming the `expose_blob_index`
(formerly `allow_blob`) flag is *not* set. (Note: the flag is set by the old stacked
BlobDB implementation, which has its own blob file handling/blob retrieval logic.)
In addition, `DBIter` now uniformly returns `Status::NotSupported` with the error
message `"BlobDB does not support merge operator."` when encountering a
blob reference while performing a merge (instead of potentially returning a
message that implies the database should be opened using the stacked BlobDB's
`Open`.)
TODO: We can implement support for lazily retrieving the blob value (or in other
words, bypassing the retrieval of blob values based on key) by extending the `Iterator`
API with a new `PrepareValue` method (similarly to `InternalIterator`, which already
supports lazy values).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7731
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25256293
Pulled By: ltamasi
fbshipit-source-id: c39cd782011495a526cdff99c16f5fca400c4811
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.
TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24260219
Pulled By: ltamasi
fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Xingbo Wang